Przejdź do treści
Biblioteka skilli
Nauka i badania · Budowanie i kod

curing-temperature

/curing-temperature

Definiuje pola temperatury w symulacji utwardzania kompozytów: inicjalizację, zmiany temperatury i pola termiczne dla kroków utwardzania.

Repozytorium
cae-agent-hub ↗
Licencja
MIT
Ostatnia zmiana repozytorium
27.10.2026

Ocena i bezpieczeństwo

100/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść35 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
Pliki w paczce
1
Skrypty
0
Komentarze HTML
0
Adresy URL w SKILL.md
0
Przestarzałość

Brak sygnałów. Repozytorium zmienione 27.10.2026, bez odwołań do wycofanych modeli i API.

Licencja

MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.

Co robi i kiedy

Definiuje pola temperatury w symulacji utwardzania kompozytów: inicjalizację, zmiany temperatury i pola termiczne dla kroków utwardzania.

Oryginalny opis (EN)

Define temperature fields for composite curing simulation. Invoke when user needs temperature initialization, temperature changes, or thermal fields for curing steps.

Jak działa

  1. Description
  2. Initial Conditions
  3. Temperature in Each Step
  4. Temperature Schedule Summary
  5. Temperature as a Predefined Field
  6. UMAT and Temperature Interaction
  7. Notes
Sekcje z nagłówków SKILL.md, w oryginale · 125 linii, 752 słów
Podgląd SKILL.md
---
name: "curing-temperature"
description: "Define temperature fields for composite curing simulation. Invoke when user needs temperature initialization, temperature changes, or thermal fields for curing steps."
---

# Curing Temperature Setup

## Description

Define temperature fields for composite curing simulation. Invoke when user needs temperature initialization, temperature changes, or thermal fields for curing steps.

## Initial Conditions

The initial temperature is set for all nodes in both instances (tool-1 and P8-1) at the start of the analysis:

```
*Initial Conditions, type=TEMPERATURE
_PickedSet333, 25.
```

- **_PickedSet333**: Node set covering ALL nodes in both instances (tool-1 and P8-1).
- **Initial temperature**: 25°C (room temperature).

### _PickedSet333 Definition

The node set _PickedSet333 is defined using generated node ranges for both instances:

```
*Nset, nset=_PickedSet333, internal, instance=tool-1, generate
    1,  2691,     1
*Nset, nset=_PickedSet333, internal, instance=P8-1, generate
    1,  5445,     1    # (or 3025 for 4-ply model)
```

- **tool-1**: Nodes 1 to 2691 (all tool nodes).
- **P8-1**: Nodes 1 to 5445 (all composite nodes for 8-ply model) or 1 to 3025 (for 4-ply model).
- The `generate` option creates a sequential node set from the start to end label with the given increment.

## Temperature in Each Step

The temperature is updated in each step of the curing cycle using the `*Temperature` predefined field. The temperature drives the UMAT material response (curing kinetics and glass transition).

### vis Step (Viscous State)

```
*Temperature
_PickedSet333, 150.
```

- Temperature changes from 25°C to 150°C.
- At 150°C, the resin is in a low-viscosity state, allowing flow and compaction.
- The UMAT subroutine recognizes this as the viscous state.

### rub Step (Rubbery State)

```
*Temperature
_PickedSet333, 180.
```

- Temperature changes from 150°C to 180°C.
- At 180°C, the cure reaction progresses and the material transitions to a rubbery state.
- The UMAT subroutine recognizes this as the rubbery state.

### glassy Step (Glassy State)

```
*Temperature
_PickedSet333, 25.
```

- Temperature changes from 180°C to 25°C (cooling to room temperature).
- As the material cools below its glass transition temperature (Tg), it transitions to a glassy state.
- The UMAT subroutine recognizes this as the glassy state.

### sp Step (Springback)

```
*Temperature
_PickedSet333, 25.
```

- Temperature maintained at 25°C.
- The tool is removed (via Model Change) and the composite undergoes springback at room temperature.

## Temperature Schedule Summary

| Step | Start Temp (°C) | End Temp (°C) | Material State |
|------|----------------|---------------|----------------|
| (initial) | 25 | 25 | - |
| vis  | 25  | 150 | Viscous |
| rub  | 150 | 180 | Rubbery |
| glassy | 180 | 25 | Glassy |
| sp   | 25  | 25  | Glassy (springback) |

## Temperature as a Predefined Field

Temperature is a predefined field in Abaqus, applied to all nodes in the model:

- The `*Temperature` keyword assigns a uniform temperature to all nodes in the specified set.
- The temperature is ramped linearly from the previous step's value to the new value over the step time.
- The UMAT subroutine receives the current temperature at each integration point and uses it to:
  - Determine the material state (viscous, rubbery, or glassy).
  - Compute the degree of cure (cure kinetics).
  - Update the glass transition temperature (Tg).
  - Calculate thermal strains and cure shrinkage strains.

## UMAT and Temperature Interaction

The UMAT subroutine uses temperature as the primary driver for material state transitions:

1. **Viscous state** (high temperature, ~150°C): Low resin viscosity, resin flow and compaction occur. The material is soft and deformable.
2. **Rubbery state** (intermediate temperature, ~180°C): Cure reaction advances, cross-linking increases. The material becomes rubbery and begins to develop stiffness.
3. **Glassy state** (low temperature, ~25°C): Below Tg, the material is rigid and glassy. Residual stresses are locked in during this phase.

The state variables (SDV1-SDV4) are updated based on the temperature history, tracking:
- Degree of cure progression
- Glass transition temperature evolution
- Current material state
- Accumulated cure strain

## Notes

- The temperature values (25, 150, 180, 25°C) represent a typical three-step curing cycle. Adjust based on the specific resin system and cure schedule.
- The temperature is applied uniformly to all nodes. For spatially varying temperature fields, use a field variable or mapped temperature data.
- The _PickedSet333 node set must include all nodes in both instances to ensure uniform temperature application.
- When changing the mesh (e.g., from 8-ply to 4-ply), update the node range for P8-1 in _PickedSet333 accordingly (5445 for 8-ply, 3025 for 4-ply).
- The temperature ramp rate is controlled by the step time. Ensure the step time is sufficient for the cure reaction to complete (especially in the rub step).

Wersje

W bazie nie ma innych skilli o nazwie curing-temperature.

Migawka bazy z 13.11.2026 · wersja paczki 3e3a9d19feef (skrót SHA-256 całej paczki)

Pobrania w ostatnich 30 dniach: 0 · ranking

Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.

Podobne skille

  • 100curing-load
    Definiuje obciążenia ciśnieniem w symulacji utwardzania kompozytów, gdy trzeba przyłożyć ciśnienie na powierzchnię kompozytu.
  • 100curing-contact
    Definiuje pary kontaktowe i tarcie w symulacji utwardzania kompozytów: kontakt forma-kompozyt, tarcie zależne od temperatury i właściwość HARD.
  • 100glm-lake-calibration
    Kalibruje General Lake Model do symulacji temperatury jeziora, dostrajając Kw, coef_mix_hyp, wind_factor, lw_factor i ch do obserwowanych profili, m.in. dla jeziora Mendota.
  • 100water-temperature-metrics
    Oblicza RMSE i inne metryki walidacji modeli temperatury wody: dopasowanie symulacji do obserwacji terenowych, podział na głębokości oraz podzbiory roczne i sezonowe.
  • 100glm-basics
    Wyjaśnia podstawy użycia General Lake Model (GLM) do symulacji temperatury jeziora: uruchamianie, pliki wejściowe i zmianę parametrów konfiguracji.
  • 100glm-calibration
    Kalibruje parametry GLM do symulacji temperatury wody, minimalizując RMSE między temperaturami symulowanymi a zmierzonymi.

Uwagi i zgłoszenia

Wiadomość trafi do Bartosza Sokolińskiego. Adres e-mail jest potrzebny tylko do odpowiedzi. Szczegóły w polityce prywatności.