Przejdź do treści
Biblioteka skilli
Nauka i badania · Budowanie i kod

curing-contact

/curing-contact

Definiuje pary kontaktowe i tarcie w symulacji utwardzania kompozytów: kontakt forma-kompozyt, tarcie zależne od temperatury i właściwość HARD.

Repozytorium
cae-agent-hub ↗
Licencja
MIT
Ostatnia zmiana repozytorium
27.10.2026

Ocena i bezpieczeństwo

100/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść35 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
Pliki w paczce
1
Skrypty
0
Komentarze HTML
0
Adresy URL w SKILL.md
0
Przestarzałość

Brak sygnałów. Repozytorium zmienione 27.10.2026, bez odwołań do wycofanych modeli i API.

Licencja

MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.

Co robi i kiedy

Definiuje pary kontaktowe i tarcie w symulacji utwardzania kompozytów: kontakt forma-kompozyt, tarcie zależne od temperatury i właściwość HARD.

Oryginalny opis (EN)

Define contact pairs and friction for composite curing simulation: mold-composite contact (S1↔S4+S6), temperature-dependent friction (0.45→0.2→0.169), HARD contact property. Invoke when setting up contact, friction, or mold interaction in curing models.

Jak działa

  1. When to Invoke
  2. Contact Pair Definition
  3. Contact Interaction Property
  4. Temperature-Dependent Friction
  5. HARD Contact Behavior
  6. Contact in Springback Step (sp)
  7. Why Contact Creates Asymmetric Springback
  8. P8only vs P8mold Contact Comparison
  9. Common Errors
Sekcje z nagłówków SKILL.md, w oryginale · 141 linii, 781 słów
Podgląd SKILL.md
---
name: "curing-contact"
description: "Define contact pairs and friction for composite curing simulation: mold-composite contact (S1↔S4+S6), temperature-dependent friction (0.45→0.2→0.169), HARD contact property. Invoke when setting up contact, friction, or mold interaction in curing models."
---

# Curing Contact Setup

Define the frictional contact between the composite (P8-1) and the mold (TOOL-1). This is the physical mechanism that constrains the composite during curing and creates asymmetric springback upon demolding.

## When to Invoke

- User asks to set up contact between composite and mold
- User mentions "接触", "摩擦", "模具接触", "contact pair"
- User needs to change friction coefficients
- User encounters contact-related convergence issues

## Contact Pair Definition

```
*Surface, type=ELEMENT, name=com-surface
P8-1.S1                      # Composite outer surface (contact with mold)

*Surface, type=ELEMENT, name=tool-surface
TOOL-1.S4, S6                # Mold contact surfaces

*Contact Pair, interaction=INTER-1, type=SURFACE TO SURFACE
com-surface, tool-surface    # Master: tool, Slave: composite
```

**Surface assignments**:

| Surface | Part | Element Face | Role |
|---------|------|-------------|------|
| `com-surface` | P8-1 (composite) | S1 (outer) | Slave surface |
| `tool-surface` | TOOL-1 (mold) | S4 + S6 | Master surface |

**Why S1 on composite?**
- S1 is the element face on the outer surface of the composite
- This is the face that physically touches the mold
- S2 is the inner surface (where pressure is applied)

**Why S4+S6 on TOOL?**
- The mold is an L-shaped bracket with two contact faces
- S4 and S6 correspond to the two inner faces of the mold L-shape
- Both faces must be included to capture full contact

## Contact Interaction Property

```
*Surface Interaction, name=INTER-1
*Friction
0.45                         # Step vis: viscous state friction
*Surface Behavior, pressure-overclosure=HARD
```

## Temperature-Dependent Friction

Friction changes with material state (temperature-dependent). Each step has a different friction coefficient:

| Step | Temperature Range | Material State | Friction Coefficient |
|------|------------------|----------------|---------------------|
| vis | 25°C → 150°C | Viscous (rubbery) | 0.45 |
| rub | 150°C → 180°C | Rubbery | 0.20 |
| glassy | 180°C → 25°C | Glassy (cured) | 0.169 |
| sp | 25°C | — | N/A (contact removed) |

**Physics behind friction change**:
- **Viscous (0.45)**: High friction because resin is viscous and sticky; composite strongly adheres to mold
- **Rubbery (0.20)**: Lower friction as resin becomes more rubbery; some slip occurs
- **Glassy (0.169)**: Lowest friction as material vitrifies; cured composite can slide more freely on mold

**How to implement per-step friction**:
```
*Step, name=vis
*Change Friction, interaction=INTER-1
0.45, 

*Step, name=rub
*Change Friction, interaction=INTER-1
0.20, 

*Step, name=glassy
*Change Friction, interaction=INTER-1
0.169, 
```

## HARD Contact Behavior

```
*Surface Behavior, pressure-overclosure=HARD
```

- **HARD**: Standard hard contact — no penetration allowed, no tension
- Pressure transfers only when surfaces are in contact
- Gap opens when pressure goes to zero (no adhesion)

## Contact in Springback Step (sp)

In the sp step, contact is **completely removed** via Model Change:

```
*Step, name=sp
*Model Change, remove
TOOL-1.EL                    # Remove mold elements
*Model Change, remove
TOOL-1, com-surface          # Remove composite contact surface assignment
*Model Change, remove
TOOL-1, tool-surface         # Remove tool contact surface assignment
```

After Model Change:
- No contact pair exists
- No friction
- Composite is free to deform (constrained only by Set-2)
- Residual stresses drive springback deformation

## Why Contact Creates Asymmetric Springback

1. **Friction varies spatially**: Different regions of the composite experience different normal pressures, leading to varying frictional resistance
2. **L-bracket geometry**: The corner region has higher contact pressure than the arm tips, creating non-uniform constraint
3. **Thermal expansion**: During heating, the composite expands and slides against the mold; friction resists this sliding asymmetrically
4. **Demolding release**: When the mold is removed, the stored frictional energy releases unevenly, causing asymmetric deformation
5. **Result**: Maximum displacement at free edges (arm tips), minimum at the corner — this is the correct physical pattern

## P8_only vs P8_mold Contact Comparison

| Aspect | P8_mold (Correct) | P8_only (Incorrect) |
|--------|-------------------|---------------------|
| Contact pair | com-surface ↔ tool-surface | None |
| Friction | 0.45 → 0.2 → 0.169 | None |
| Contact behavior | HARD | None |
| Demolding | Model Change removes contact | No demolding |
| Composite constraint | Friction (allows slip) | ENCASTRE (no slip) |
| Springback pattern | Asymmetric (correct) | Center-symmetric (wrong) |

## Common Errors

| Error | Cause | Fix |
|-------|-------|-----|
| Penetration in ODB | Contact not properly defined | Verify surface assignments (S1 on composite, S4+S6 on tool) |
| No springback | Contact not removed in sp | Add `*Model Change, remove` for TOOL elements and surfaces |
| Convergence issues | Friction too high | Check friction values: 0.45/0.2/0.169 for vis/rub/glassy |
| Symmetric deformation | No contact (P8_only model) | Use P8_mold_V2.inp with proper contact pair |
| CPRESS = 0 everywhere | Wrong surface pair | Verify master/slave assignment; tool is master |

Wersje

W bazie nie ma innych skilli o nazwie curing-contact.

Migawka bazy z 13.11.2026 · wersja paczki 1d7191749289 (skrót SHA-256 całej paczki)

Pobrania w ostatnich 30 dniach: 0 · ranking

Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.

Podobne skille

  • 100mold-geometry
    Tworzy geometrię formy i narzędzi do symulacji utwardzania kompozytów, w tym powierzchnie narzędzia i kontakt formy z kompozytem.
  • 100curing-temperature
    Definiuje pola temperatury w symulacji utwardzania kompozytów: inicjalizację, zmiany temperatury i pola termiczne dla kroków utwardzania.

Uwagi i zgłoszenia

Wiadomość trafi do Bartosza Sokolińskiego. Adres e-mail jest potrzebny tylko do odpowiedzi. Szczegóły w polityce prywatności.