tech-refining-catalytic-cracking
/tech-refining-catalytic-cracking
Opisuje krakowanie katalityczne FCC: reaktor z riserem, stripper katalizatora, regenerator, kolumnę frakcjonującą i bilans cieplny.
- Autor
- ChemE-as-Code ↗
- Repozytorium
- core ↗
- Licencja
- AGPL-3.0
- Ostatnia zmiana repozytorium
- 13.11.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 1
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 13.11.2026, bez odwołań do wycofanych modeli i API.
AGPL-3.0, copyleft: przeróbki udostępniane innym muszą mieć tę samą licencję.
Co robi i kiedy
Opisuje krakowanie katalityczne FCC: reaktor z riserem, stripper katalizatora, regenerator, kolumnę frakcjonującą i bilans cieplny.
Oryginalny opis (EN)
Reference for fluid catalytic cracking. Riser and reactor, catalyst stripper, regenerator and flue gas train, main fractionator and gas concentration unit, with the heat balance logic and variants. Use when an FCC unit is being discussed or reviewed.
Jak działa
- Purpose and when to use
- Required inputs and missing inputs
- Workflow and tools
- Validation and failure handling
- Outputs and provenance
- Required human judgment
- References
Podgląd SKILL.md
--- name: tech-refining-catalytic-cracking description: Reference for fluid catalytic cracking. Riser and reactor, catalyst stripper, regenerator and flue gas train, main fractionator and gas concentration unit, with the heat balance logic and variants. Use when an FCC unit is being discussed or reviewed. --- # Catalytic cracking ## Purpose and when to use Turns heavy gas oil into gasoline, olefinic LPG and cycle oils without hydrogen. Coke laid on the catalyst is burned in the regenerator, and that heat vaporises the feed and drives the endothermic cracking, so the unit is a closed heat loop between two vessels. Reached from `tech-refining`. ## Required inputs and missing inputs Feed properties (carbon residue, metals, nitrogen), desired mode (gasoline or distillate), feed rate, catalyst type, and air and flue gas constraints. Ask for any that is missing. ## Workflow and tools Engineering guidance only; core has no calculation for this. The heat balance and catalyst circulation are not computed by core. Units in flow order: feed surge, charge pump and preheat against fractionator pumparounds; riser where feed meets hot regenerated catalyst and cracks in seconds; reactor cyclones; catalyst stripper with steam (unstripped hydrocarbon burns in the regenerator and appears as regenerator heat); spent catalyst standpipe and slide valve; regenerator with air blower, cyclones, and a flue gas train (power recovery turbine, particulate control, heat recovery); fresh and equilibrium catalyst hoppers; main fractionator fed at the bottom with pumparounds, side strippers and a slurry circuit in the bottom, built like a crude column; heat recovery as steam; gas concentration unit (wet gas compressor, primary and sponge absorbers, stripper, debutaniser), whose gas goes to amine treating. Control reported: riser outlet temperature on the regenerated catalyst slide valve (sets catalyst to oil ratio, the conversion handle); regenerator temperature on air rate and catalyst cooling for resid feed; reactor-regenerator differential pressure to keep catalyst moving in the intended direction; dispersion and stripping steam on their own controllers; catalyst make-up on equilibrium activity. Variants: gasoline mode versus distillate mode (lower severity roughly reduces gas make and raises distillate yield); resid feed brings catalyst cooling, higher make-up and tighter metals limits; zeolite to matrix balance is the yield-tuning variable. ## Validation and failure handling Questions for a flowsheet or P&ID: - Does the catalyst circuit close (riser, cyclones, stripper, spent line, regenerator, regenerated line), with slide valves in both transfer lines and the differential pressure measurement that governs them? - Are dispersion steam and stripping steam separate services, and do catalyst hoppers connect to the regenerator? - Does the fractionator bottom show a slurry circuit and the overhead receiver a sour water draw? - Does the gas plant show primary and sponge absorbers, with sponge bottoms back to the main fractionator, and gas reaching amine treating before the fuel header? Reported limits and hazards: the regenerator metallurgical temperature limit forces catalyst cooling as coke rises, and a resid feed is limited by the steam a cooler can raise; slide valve and standpipe integrity guard against reverse flow of hydrocarbon into the regenerator or air into the reactor, a question to put to the designer; nickel and vanadium damage catalyst; the power recovery turbine needs its own protection and bypass. FCC light gasoline carries mercaptans and the distillate has a low cetane index, so treating is a flowsheet consequence. This skill does not certify protection. ## Outputs and provenance Line-up, mode, and open points; figures stated as a worked case. ## Required human judgment Severity and mode, regenerator temperature limit, feed metals acceptance, trips and reverse-flow protection. ## References - Parkash, *Refining Processes Handbook*, Elsevier 2003, Ch 4 (a 40,000 bpsd worked case: riser outlet about 991 degF, regenerator bed about 1341 degF, catalyst to oil ratio about 5.4). Indicative only. Speight, *Handbook of Industrial Hydrocarbon Processes*, Elsevier 2011, Ch 11 quotes 1230-1400 degF, which is a regenerator-side figure rather than a riser outlet; the two are not one range. Needs review before operational use. - `tech-refining`, `tech-refining-treating-and-blending`.
Wersje
W bazie nie ma innych skilli o nazwie tech-refining-catalytic-cracking.
Migawka bazy z 13.11.2026 · wersja paczki 9b6457f05363 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 90tech-refining-hydroprocessing
Opisuje hydroodsiarczanie i hydrokraking w rafinerii: reaktor wieloczęściowy, obieg gazu recyklowego, separatory i płukanie aminą. - 90tech-gas-acid-gas-removal
Opisuje usuwanie kwaśnych gazów z gazu ziemnego: obieg aminowy, rozpuszczalniki fizyczne i hybrydowe, membrany, typowe awarie i wybór metody.