Przejdź do treści
Biblioteka skilli
Produktywność osobista · Automatyzacja

t3-tasks

/t3-tasks

Obsługuje wątki i zadania T3 Code po ich starcie: czyta i wysyła wiadomości, steruje, obsługuje pytania i archiwizuje zakończone zadania.

Repozytorium
Heimdall ↗
Licencja
Apache-2.0
Ostatnia zmiana repozytorium
06.11.2026

Ocena i bezpieczeństwo

90/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść25 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
Pliki w paczce
1
Skrypty
0
Komentarze HTML
0
Adresy URL w SKILL.md
0
Przestarzałość

Brak sygnałów. Repozytorium zmienione 06.11.2026, bez odwołań do wycofanych modeli i API.

Licencja

Apache-2.0, otwarta: można używać i zmieniać, z zachowaniem licencji i informacji o zmianach.

Co robi i kiedy

Obsługuje wątki i zadania T3 Code po ich starcie: czyta i wysyła wiadomości, steruje, obsługuje pytania i archiwizuje zakończone zadania.

Oryginalny opis (EN)

Working with T3 threads and your tasks after they start. Covers reading or messaging any thread, steering or queueing, a thread's questions and approvals, other T3 tools, archiving finished tasks, and why Heimdall works through T3 Code. Use when a task or thread needs more than starting it, and when someone asks why T3 Code is required.

Jak działa

  1. Threads
  2. Finishing tasks
  3. Why T3 Code
Sekcje z nagłówków SKILL.md, w oryginale · 26 linii, 251 słów
Podgląd SKILL.md
---
name: t3-tasks
description: Working with T3 threads and your tasks after they start. Covers reading or messaging any thread, steering or queueing, a thread's questions and approvals, other T3 tools, archiving finished tasks, and why Heimdall works through T3 Code. Use when a task or thread needs more than starting it, and when someone asks why T3 Code is required.
---

# T3 threads and tasks

## Threads

- `t3_thread_list`, `t3_thread_read` (several threads in one call) and `t3_thread_send` work on any thread (also the
  user's own). Everything else in T3 goes through `t3_call`; `t3_tools` shows the tools and their arguments. Always
  pass threadId or projectId.
- A change to a task's running work: `t3_thread_send` with mode `steer`; a separate later request: `queue`.
- A thread's question you can answer from the user's words: answer it. Otherwise ask the user.
- You cannot approve permissions or stop a thread's own sub-agents: tell the user which thread waits.
- Tell them only what they need; threads they work in themselves need no report.

## Finishing tasks

`task_cancel` stops one of your tasks and archives it. Once you have reported a finished task's result, archive it at
once; one-off research and spin-off tasks likewise. Keep a task open only while the user still has to act on it: a
pending decision or a visual they have not seen. Archive it too when they drop the work. A review is a new task given
the original brief.

## Why T3 Code

Labs spend millions on the harnesses for their own models, and a model does its best work in the harness it was built
for. So you run each model in its own harness through T3 Code, which is open source and already does what you need,
and you never rebuild harness features yourself. When someone asks why T3 Code is required, give them that reason.

Wersje

W bazie nie ma innych skilli o nazwie t3-tasks.

Migawka bazy z 13.11.2026 · wersja paczki f87d319987a2 (skrót SHA-256 całej paczki)

Pobrania w ostatnich 30 dniach: 0 · ranking

Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.

Podobne skille

  • 100organize-threads
    Pomaga uporządkować niesklasyfikowane wątki: analizuje tytuły i metadane oraz proponuje odpowiednie tagi dla każdego wątku.
  • 100manage
    Tworzy, zmienia, zamyka i wyszukuje klientów, wątki, połączenia i zadania w przestrzeni Echo przez jej CLI.
  • 91tasks
    Tworzy, aktualizuje, łączy, archiwizuje, sprawdza i komentuje zadania Sokosumi przez bezgłowe CLI.
  • 100codex-app-threads
    Tworzy, wyświetla, czyta, forkuje, zmienia nazwy, archiwizuje i przypina wątki Codex oraz obsługuje automatyzacje i nawigację w aplikacji, gdy sesja używa niestandardowego modelu.
  • 100tasks
    Obsługuje listy zadań w plikach .llm/todo.md: wyciąga niezakończone pozycje, oznacza je jako zrobione i realizuje zadania.
  • 90codex-thread-doctor
    Diagnozuje i naprawia historię zadań Codex, w tym brakujące wątki, błędy przywracania i nieaktualne wiersze archiwum.

Uwagi i zgłoszenia

Wiadomość trafi do Bartosza Sokolińskiego. Adres e-mail jest potrzebny tylko do odpowiedzi. Szczegóły w polityce prywatności.