Przejdź do treści
Biblioteka skilli
Programowanie · Nauka i wyjaśnianie

start-a-build

/start-a-build

Pokazuje, jak przygotować projekt pod zlecenie: instalację claude-packs, miejsce zlecenia, konfigurację Windows, WSL i LSP.

Repozytorium
claude-packs ↗
Licencja
MIT
Ostatnia zmiana repozytorium
11.11.2026

Ocena i bezpieczeństwo

86/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść21 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
Pliki w paczce
2
Skrypty
0
Komentarze HTML
0
Adresy URL w SKILL.md
0
Przestarzałość

Brak sygnałów. Repozytorium zmienione 11.11.2026, bez odwołań do wycofanych modeli i API.

Licencja

MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.

Co robi i kiedy

Pokazuje, jak przygotować projekt pod zlecenie: instalację claude-packs, miejsce zlecenia, konfigurację Windows, WSL i LSP.

Oryginalny opis (EN)

Use when asked how to set up a project for a work order, install or configure claude-packs, where to put the order and the design, what to do next, or how to start the build; also on Windows, WSL or LSP set-up questions for a build.

Jak działa

SKILL.md bez nagłówków drugiego poziomu · 23 linii, 463 słów

Podgląd SKILL.md
---
name: start-a-build
description: Use when asked how to set up a project for a work order, install or configure claude-packs, where to put the order and the design, what to do next, or how to start the build; also on Windows, WSL or LSP set-up questions for a build.
---

# Start a build (one job: from a finished order to the first build session)

The order is finished in claude.ai; the build runs in Claude Code on the person's machine, under the claude-packs kit. This skill is the hand-over between the two. `handover.md` beside this file holds every command, filled in from the order: read it before printing anything, and print from it, never from memory.

The person may never have used a terminal for this. Say each step in one line, give the command in a code block, and say what it does in one more line. Fill in the project's name, the order's template and the path the order was saved to; leave no placeholder for them to work out.

<constraints>
Always do:
1. Ask, once, which machine they build on: Windows, macOS or Linux. On Windows the build is in WSL, and the project lives inside the WSL filesystem (section 2 of `handover.md` says why).
2. If a GitHub connection is available in this chat, offer first to set the project up for them (section 5): create the repository, install the kit from the order's install block, put the order and the pictures in place, run the pre-flight, push. Recommend it. Say plainly what still has to run on their machine.
3. Otherwise print, in order: the machine set-up they still need (section 2), then the project commands (section 3): `new` with `--from` the order, which installs the kit from the order's install block; `workorder` with the order's `--template`; the order saved over the written one; the pictures in `design/reference/`, one per screen with its prompt beside it; `workorder check`; the first commit.
4. Have them run `workorder check` before the first session, and read its lines with them. A refusal names what to fix: a placeholder left, a Done when with no number, a skill not installed and the pack to add, a red doctor. Fix it in the order, here, then check again.
5. End with the one sentence that starts the build, and the runner for leaving it on its own (section 4), and what to look at while it runs: `progress.md`, `decisions.md`, `bugs.md`, the evidence folder.
6. Answer "what's next" from where they are in this list, one step at a time.

Never do:
- Print a command, a flag or a skill the kit does not have. Every command here is in `handover.md`, and the kit's planner test holds it to the kit's own usage text.
- Tell them to edit `.claude/layout.json` by hand for what the install block carries: `--from` writes it.
- Start the build before `workorder check` is green.
- Store a token in a remote URL or a file. A secret lives in an ignored `.env`, read by name.
</constraints>
Pliki w paczce (2)
  • SKILL.md 3 KB
  • handover.md 6 KB

Wersje

W bazie nie ma innych skilli o nazwie start-a-build.

Migawka bazy z 13.11.2026 · wersja paczki 6496dd6b1d9a (skrót SHA-256 całej paczki)

Pobrania w ostatnich 30 dniach: 0 · ranking

Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.

Podobne skille

  • 90install-wsl-auto
    Instaluje i sprawdza WSL na Windows oraz naprawia uszkodzoną instalację według prowadzonych kroków.
  • 98wsl
    Konfiguruje i rozwiązuje problemy z WSL na Windows 10 i 11: wydajność systemu plików, sieć, GPU, systemd oraz środowiska programistyczne.
  • 95update-wsl-hermes
    Aktualizuje agenta Hermes działającego w WSL Ubuntu, zapisuje lokalne zmiany i zgłasza, czy w źródle są nowe commity.
  • 80wsl-interop
    Pomaga w ścieżkach i dostępie do plików między Windows a WSL, także przy agencie SSH i schowku.
  • 100lsp-setup
    Włącza inteligencję kodu (przejście do definicji, odwołania, podpowiedzi, typy) dla dowolnego języka przez instalację i konfigurację serwera LSP dla Copilot CLI wraz z plikiem JSON.
  • 88cross-platform
    Pilnuje, by kod, testy i skrypty działały zarówno w Windows, jak i w Linuksie lub WSL, i wyjaśnia rozbieżności między systemami.

Uwagi i zgłoszenia

Wiadomość trafi do Bartosza Sokolińskiego. Adres e-mail jest potrzebny tylko do odpowiedzi. Szczegóły w polityce prywatności.