Zarządzanie i produkt · Automatyzacja
run-a-workorder
/run-a-workorder
Uruchamia zlecenie, zostawia je w toku albo zmienia zlecenie, które już działa.
- Autor
- TheDecipherist ↗
- Repozytorium
- claude-packs ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 11.11.2026
Ocena i bezpieczeństwo
86/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść21 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
- Pliki w paczce
- 1
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Przestarzałość
Brak sygnałów. Repozytorium zmienione 11.11.2026, bez odwołań do wycofanych modeli i API.
Licencja
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
Co robi i kiedy
Uruchamia zlecenie, zostawia je w toku albo zmienia zlecenie, które już działa.
Oryginalny opis (EN)
Use when starting a work order, leaving one running, or changing one that is running.
Jak działa
SKILL.md bez nagłówków drugiego poziomu · 23 linii, 392 słów
Podgląd SKILL.md
--- name: run-a-workorder description: Use when starting a work order, leaving one running, or changing one that is running. --- # Run a work order (one job: a finished order started, left running, and changed only through its prompt) A work order is `docs/workorders/<name>/`: `workorder.md` (the steps, written with `write-a-workorder` or planned in claude.ai), `PROMPT.md` (how a run works with nobody there) and `run.sh` (session after session until the `DONE` file). <constraints> Always do: 1. Before the first session, run `workorder check <name>` and fix every line it refuses: a placeholder left, a step whose Done when holds no number and no path to a test, a skill the project has not installed (it names the pack to add), a red `doctor --strict`. `run.sh` and `PROMPT.md` run it too, and start nothing on a refusal. 2. Install from the order's install block first, if the project was not made from it: `init --from docs/workorders/<name>/workorder.md`. 3. Before leaving it running, read `PROMPT.md` and `run.sh` once, and check that the first step can start. 4. Start it by typing `Run docs/workorders/<name>/PROMPT.md` in Claude Code to watch, or `bash docs/workorders/<name>/run.sh` to leave it. The same sentence resumes it in any later session; all progress lives in files. 5. Watch the files, not the chat: `progress.md` (one line per finished item), `decisions.md` (overturn any by editing the order), `bugs.md`, and the evidence folder of each step. 6. To change a run in progress, edit its `PROMPT.md` and commit it. A run refuses an instruction it cannot trace to its order or to you, so a file dropped beside it is rightly ignored. 7. Keep a run's agents in the foreground, every independent one in the same message: a session with nobody there ends when its turn ends, and stops every agent it left in the background (`agents-held`). 8. Land the order's branch once, when every step's Done when is measured, gated by the tests its changes reach against the trunk (`land-branch`). Never do: - Start a run on an order `workorder check` refuses: it stops halfway, at the line it could not finish. - Change a running order by talking to it, or by a file beside it. The prompt is the one way in. - Run the whole suite at the end on the run's own initiative; the gate is the tests the branch reaches. - Read a checkpoint as the end. A run is finished on the `DONE` file, after its last gate. </constraints>
Wersje
W bazie nie ma innych skilli o nazwie run-a-workorder.
Migawka bazy z 13.11.2026 · wersja paczki 34ba149425d6 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100write-a-workorder
Pisze zlecenie pracy dla projektu lub dużej pracy, która ma być wykonana bez nadzoru człowieka, także w wielu sesjach. - 86start-from-a-workorder
Pomaga zacząć nową aplikację, produkt lub przebudowę od zlecenia, projektu graficznego albo planu. - 100workorder
Zamraża zakres zadania w pisemnym zleceniu przed budową i realizuje je do końca w jednym przebiegu: build, samoweryfikacja, poprawki i ponowna weryfikacja, z wynikiem lub śladem dwóch porażek. - 90work-order-writer
Pisze zlecenie dla agenta lub wykonawcy tak kompletne, że da się je wykonać bez zadawania pytań.