rex-micro
/rex-micro
Konfiguruje pad makro Work Louder Codex Micro jako sterownik terminala Rex: klawisze, pokrętła, warstwy i tryby agenta.
- Autor
- JiehoonKwak ↗
- Repozytorium
- rex-micro ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 10.11.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 1
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 10.11.2026, bez odwołań do wycofanych modeli i API.
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
Co robi i kiedy
Konfiguruje pad makro Work Louder Codex Micro jako sterownik terminala Rex: klawisze, pokrętła, warstwy i tryby agenta.
Oryginalny opis (EN)
Configure and troubleshoot rex-micro, which turns a Work Louder Codex Micro macro pad into a controller for the Rex terminal. Use when the user wants to change what a pad key, dial, stick or layer does, add a layer, change Agent Key colors or modes, bind push-to-talk, or fix the pad not responding.
Jak działa
- Find the current state first
- Change a binding
- Agent Keys and layers
- After every edit
- When the pad does nothing
Podgląd SKILL.md
---
name: rex-micro
description: Configure and troubleshoot rex-micro, which turns a Work Louder Codex Micro macro pad into a controller for the Rex terminal. Use when the user wants to change what a pad key, dial, stick or layer does, add a layer, change Agent Key colors or modes, bind push-to-talk, or fix the pad not responding.
---
# rex-micro
rex-micro is a background daemon plus CLI. The daemon reads the pad, lights
the six Agent Keys from the agent state Rex reports for each pane, and turns
presses into Rex actions. Everything the user can change lives in one TOML
file; the daemon reloads it on save.
## Find the current state first
```sh
rex-micro config path # the config file (absent = built-in default)
rex-micro keys # what every key does, per layer, after fall-through
rex-micro status --json # pad, active layer, which pane each Agent Key follows
rex-micro doctor # Rex, pad, permission and config checks
```
If the config file does not exist, create it with `rex-micro config init`
before editing. Never overwrite an existing config wholesale; edit the keys
the user asked about.
## Change a binding
Key names: `AG00`-`AG05` (Agent Keys), `ACT06`-`ACT09`, `MIC` (the wide key,
both of its switches), `ACT12`, `ENC_CLK` (dial press), `ENC_CW`/`ENC_CC`
(dial turns), `STICK_UP`/`STICK_DOWN`/`STICK_LEFT`/`STICK_RIGHT`. The caps are
swappable, so ask which position the user means when a cap name is ambiguous;
factory caps are FAST, APPROVE, REJECT, SPLIT on `ACT06`-`ACT09`, MIC, and
CODEX on `ACT12`.
`rex-micro config default` prints the default config: every option, binding
type, gesture, layer `match` and Agent Key mode, with examples. Read it before
writing a binding you have not used. `rex-micro actions` lists the Rex actions;
actions without a dot are the user's own `rex.action` definitions in
`~/.config/rex/init.lua`, where a complex behaviour belongs, bound with
`{ action = "name" }`. For a layer `match`, `rex-micro status --json` shows the
exact `front_app` and `program` names.
People can also edit bindings with `rex-micro edit`, a full-screen editor;
suggest it when they want to try things by pressing keys.
## Agent Keys and layers
- The Agent Keys follow agents on this Mac and on every host in `rex hosts`,
as the Rex sidebar does. `[agents] order` picks how they are ordered:
`stable` (a key keeps its agent), `priority` (the sidebar's Activity by
Priority) or `session`. `rex-micro status` shows each key's host.
- `[pad] layers = "sync"` stores the config's layers (at most six) on the pad:
the touch sensor switches them and the pad's LEDs show the active one.
Setting `"off"` writes the pad's previous keymap back. It replaces what Work
Louder Input put on the pad, so confirm with the user before turning it on,
and have them quit Input.
- Keep Agent Keys on agents in every layer (`[agents] always = true`) unless the
user wants otherwise; layers that turn on by `match = { program = ... }`
need no switching at all.
- Give each binding you write a short `label` ("Focus mode", "Tab search"):
`{ builtin = "keys.show" }`, on the dial's hold by default, shows the active
layer's keys on screen by those labels, so people need not memorize them.
## After every edit
Run `rex-micro config check`. It names the bad setting (for example
`layer "tools".keys.ACT10: unknown key (the wide key is MIC)`); fix it before
finishing. Then confirm with `rex-micro keys`, and exercise the key yourself:
`rex-micro press KEY` (add `--double` or `--hold` for those gestures) makes
the running daemon handle it exactly as a pad press on the active layer, waits
for its actions, and prints the binding, an Agent Key's target pane and any
error. Check the outcome in Rex (for an Agent Key, `rex session inspect` shows
the focused pane) rather than asking the user to press it. Keys that send
Enter, Escape or close a pane act on real panes; press them only when that is
what you mean to do.
## When the pad does nothing
1. `rex-micro doctor`. Every `FAIL` line says what to do.
2. Input Monitoring is granted per executable path and signature. The service
must run from `~/Library/Application Support/rex-micro/bin/rex-micro`
(`rex-micro service install` sets that up); ad-hoc signed builds lose the
grant whenever the binary changes.
3. Another app driving the pad repaints the lights and acts on presses. Quit
Work Louder Input. For ChatGPT, switch it off under System Settings >
Privacy & Security > Input Monitoring and restart it; it then leaves the
pad alone. The daemon
notices such writes, and `doctor` then reports `other app`.
4. A key that types a keystroke instead of reaching rex-micro has been
remapped in the pad's own keymap (Work Louder Input edits it). `rex-micro
test` marks such keys `device`. rex-micro only sees keys whose Layer 1
keycode is still the factory one.
5. A `shortcut` binding does nothing: Accessibility is missing for the
daemon's executable. `doctor` reports `daemon shortcuts`; allow
rex-micro under System Settings > Privacy & Security > Accessibility.
6. A layer does not turn on: compare `front_app`/`program` in
`rex-micro status --json` with the layer's `match`. With pad layers on,
`pad_layers` in the same output says `sync` or the error that stopped it.
7. `rex-micro monitor` prints raw pad events while the daemon is paused.
8. Logs: `~/Library/Logs/rex-micro.log`.
Wersje
W bazie nie ma innych skilli o nazwie rex-micro.
Migawka bazy z 13.11.2026 · wersja paczki dcf236d51aa1 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100rex-canvas
Pokazuje diagram rysowany przez MCP Markasso na żywo w panelu Rex obok terminala agenta. - 100rexp
Zarządza zapisanymi przestrzeniami projektu w Rex: konfiguruje, uruchamia, przełącza, zapisuje i zatrzymuje workspace'y. - 100open-in-rex
Otwiera sesję aplikacji Claude desktop w terminalowym Rex przez polecenie claude --resume i może skopiować samo polecenie wznowienia. - 100rex-task-board
Pokazuje na żywo tablicę zadań w ASCII w panelu obok terminala agenta: fazy, postęp, decyzje do podjęcia przez użytkownika. - 100rex-agent
Zarządza flotą agentów AI w terminalu Rex: uruchamia root i pracowników w jednej karcie, wysyła polecenia i czyta ich wyniki. - 90pad
Zarządza zadaniami, błędami, pomysłami i planami w przestrzeniach Pad: wyszukuje, tworzy, komentuje i wskazuje, co robić dalej.