REPLACE-with-skill-name
/REPLACE-with-skill-name
Prawdopodobnie szablon skilla do programowania firmware'u na konkretną płytkę mikrokontrolera wraz z konfiguracją SDK.
- Autor
- alexex1993 ↗
- Repozytorium
- mcu-skills ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 15.10.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 5
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 15.10.2026, bez odwołań do wycofanych modeli i API.
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
Co robi i kiedy
Prawdopodobnie szablon skilla do programowania firmware'u na konkretną płytkę mikrokontrolera wraz z konfiguracją SDK.
Oryginalny opis (EN)
Firmware development for the <VENDOR> <BOARD NAME> (<MCU PART NUMBER>) — its <peripheral>, <peripheral>, <peripheral>, and the <SDK/HAL> + <build system> setup around them. Use when working on this board or any <compatible siblings>: project setup, <config file>, clock configuration, pin mapping, peripheral bring-up, <the board's headline concern>, flashing, or debugging why something on the board does not work.
Jak działa
- Orientation
- Rules that prevent the expensive mistakes
- When the task is <the thing this board is used for>
- Starting a new project
- Flashing
- Reporting
Podgląd SKILL.md
--- name: REPLACE-with-skill-name description: >- Firmware development for the <VENDOR> <BOARD NAME> (<MCU PART NUMBER>) — its <peripheral>, <peripheral>, <peripheral>, and the <SDK/HAL> + <build system> setup around them. Use when working on this board or any <compatible siblings>: project setup, <config file>, clock configuration, pin mapping, peripheral bring-up, <the board's headline concern>, flashing, or debugging why something on the board does not work. --- # <Vendor> <Board> (<MCU>) <One paragraph: what this board is, and what the reference files hold. Say explicitly that the detail lives in the reference files and should be read rather than guessed at.> - `reference/board-hardware.md` — <what it answers> - `reference/recipes.md` — <what it answers> - `template/` — a complete working project that builds and flashes, plus a scaffolding script. ## Orientation | | | |---|---| | MCU | <part number, core, flash, RAM, package> | | Clocks | <crystals populated, and the clock tree that is known to work> | | Display | <controller, resolution, bus, pins> | | LED / button | <pin and **polarity** for each> | | Storage | <internal / external flash, SD, PSRAM, with addresses> | | USB | <peripheral, pins, bootloader behaviour> | | Debug | <SWD/JTAG/UART header and pins> | <Delete rows that don't apply; add rows the board needs.> ## Rules that prevent the expensive mistakes <10–15 numbered rules from your bring-up log. Each is imperative and carries its consequence. Template for one entry:> 1. **`<the setting, in code form>`** — <why the board needs it>. Without it, <the symptom, which should not obviously point back at this setting>. ## When the task is <the thing this board is used for> <The one or two areas where the naive approach is badly wrong. Give the mechanism and the numbers, so the model can generalise past the case you wrote down. Delete if the board has none.> ## Starting a new project Do not hand-assemble one. `template/` is a verified-working project — scaffold from it: ```sh ~/.claude/skills/<skill-name>/template/variants/new-project.sh <target-dir> [--full|--minimal] cd <target-dir> && <build command> ``` - `--full` (default) — <what it contains>. <flash cost>. - `--minimal` — <what it contains>. <flash cost>. Use it to prove the toolchain and the flashing route before adding anything. When the user already has a project, prefer bringing it in line with the template's `<config file>` over rewriting their code. ## Flashing <The full keystroke-level sequence. What enumerates as what. What the board will not do for itself. How to recover a bricked board. The alternative route (probe/SWD) and when it's needed.> ## Reporting State honestly what was verified on hardware versus derived from the datasheet. <Name the specific settings here that are outside published specs and merely work on this board.>
Pliki w paczce (5)
- SKILL.md 3 KB
- assets/IMAGE.md 1 KB
- reference/board-hardware.md 1 KB
- reference/recipes.md 1 KB
- template/README.md 1 KB
Wersje
| Repozytorium | Wynik | Licencja |
|---|---|---|
| Ta strona · alexex1993/mcu-skills | 90 | MIT |
| nvidia-tao/tao-skill-bank | 90 | Apache-2.0 |
| nvidia-tao/tao-skill-bank | 90 | Apache-2.0 |
Migawka bazy z 13.11.2026 · wersja paczki eb25fcc11823 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100embedded-firmware-from-hardware
Buduje i przegląda firmware mikrokontrolera na podstawie schematu, PCB, netlisty, mapy pinów i BOM, w tym architekturę BSP, HAL i diagnostykę płyty. - 100stm32h750-weact
Prowadzi firmware dla płytki WeAct MiniSTM32H7 z STM32H750: wyświetlacz TFT, kamerę DVP, pamięć QSPI, microSD, USB i konfigurację HAL. - 95generate_hal
Pisze cienką warstwę abstrakcji sprzętu dla firmware MCU: GPIO, SPI, I2C, UART i timery, z pinami ze schematu KiCad. - 100embedded-debug-entry
Przeprowadza triaż próśb o debugowanie urządzeń wbudowanych: MCU, firmware, uruchamianie płytek, flashowanie, logi szeregowe, RTOS, bootloader, niski pobór mocy i peryferia. - 100board-design
Projektuje nową płytkę drukowaną lub zmienia architekturę płytki w atopile: okablowanie złączy, trasowanie szyn zasilania, przypisanie peryferiów MCU i składanie pakietów. - 90esp32-peripheral-instance-budget
Ustala budżet instancji peryferiów na ESP32, czyli ile magistral, timerów i kanałów można zająć jednocześnie.