qa-explore-quick
/qa-explore-quick
Szybko sprawdza jedną stronę lub funkcję w około 15 minut, stosuje heurystyki i raportuje ustalenia bez mapowania całego serwisu.
- Autor
- willcoliveira ↗
- Repozytorium
- qualiow-exploratory-testing-skills ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 06.10.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 1
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 06.10.2026, bez odwołań do wycofanych modeli i API.
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
Co robi i kiedy
Szybko sprawdza jedną stronę lub funkcję w około 15 minut, stosuje heurystyki i raportuje ustalenia bez mapowania całego serwisu.
Wyzwalacze z opisu
Argumenty
/qa-explore-quick <url> [--focus <area>]
Oryginalny opis (EN)
Quick focused exploratory testing session on a single page or feature (~15 min). No full site mapping — goes directly to the target, applies heuristics, reports findings. Use when user says: "quick check", "test this page", "quick explore", or wants a fast review.
Jak działa
- Input
- Rules that apply as-is
- Flow
- Rules
Podgląd SKILL.md
---
name: qa-explore-quick
description: >
Quick focused exploratory testing session on a single page or feature (~15 min).
No full site mapping — goes directly to the target, applies heuristics, reports findings.
Use when user says: "quick check", "test this page", "quick explore", or wants a fast review.
argument-hint: "<url> [--focus <area>]"
allowed-tools: Bash(playwright-cli:*), Bash(npx playwright-cli:*), Bash(qualiow:*), Bash(npx -y -p qualiow-exploratory-testing qualiow:*), Read, Write, Glob, Grep
---
# Quick Exploratory Testing Session
You are a **Principal QA Engineer** doing a focused 15-minute exploratory session on a specific page or feature.
## Input
- **URL**: the specific page to test (required)
- **focus**: what to look for (optional; e.g. "forms", "accessibility", "navigation")
## Rules that apply as-is
- `${CLAUDE_SKILL_DIR}/../qa-explore/references/security-rules.md` — production rule, redaction before disk, session isolation, confidentiality header
- `${CLAUDE_SKILL_DIR}/../qa-explore/references/paths.md` — target/credential resolution, session-directory scheme, index rows
- `${CLAUDE_SKILL_DIR}/../qa-explore/references/output-contract.md` — bug-report and session-report format
- `${CLAUDE_SKILL_DIR}/../qa-explore/references/severity-guide.md` — severity; when in doubt go lower
## Flow
### 1. Setup (1 min)
Before opening the browser:
1. Resolve config per `paths.md`: `qa/target.yml` in the project if present (base URL, auth strategy, scope hints), else `data/targets/_default.yml`.
2. Credentials from `qa/.env`, else `.env`; never log the values.
3. Apply the production rule to the hostname; if it fires, log `[SAFETY] Production detected -- running in read-only mode` and never submit.
4. Create `output/sessions/<YYYY-MM-DD-HHmm>-quick-<slug>/` with `screenshots/`, `bugs/`, `evidence/`, and a short `charter.md` (header, URL, focus, time box 15 min, read-only flag). Start `session-log.md`.
5. Choose the session id `-s=quick-<HHmm>-<slug>`. **Every `playwright-cli` call below carries `-s=<sid>`; the examples omit it.**
```bash
playwright-cli open <url>
playwright-cli snapshot
playwright-cli console error
playwright-cli requests
```
If the target requires auth (`storage_state` or `token`), apply it as in `${CLAUDE_SKILL_DIR}/../qa-explore/phases/01-auth.md` before continuing.
### 2. Quick Analysis (2 min)
From the snapshot, identify:
- Forms and interactive elements
- Navigation and links
- Images and media
- Error states visible
`playwright-cli find "<text>"` locates a label without re-reading the whole tree.
Then add the areas you will test to `charter.md` — 1 to 3 rows, IDs `A1`, `A2`, `A3`, never
renumbered or removed:
```markdown
## Feature Risk Ranking
| ID | Feature | Risk |
|----|---------|------|
| A1 | [the page or feature under test] | P1 |
```
### 3. Focused Testing (10 min)
Based on what's on the page, apply relevant heuristics:
**If forms present:**
- Happy path → boundary values → negative inputs → XSS/injection (in read-only mode: fill, never submit)
- Check validation messages, required fields, error states
**If navigation/links:**
- Click all links, check for dead links, verify back/forward
- Check active states, breadcrumbs, consistency
**If content heavy:**
- Check headings hierarchy, alt text, contrast
- Test responsive: `playwright-cli resize 375 667` then `playwright-cli resize 1280 720`
**Always check:**
- `playwright-cli console error` — JS errors
- `playwright-cli requests` — failed requests (`request <n>` for details)
- `playwright-cli press Tab` (x5) — focus order and visibility
- Responsive mobile: `playwright-cli resize 375 667`
- Ambiguous element in a repro step: `playwright-cli generate-locator <ref>` for a stable locator
**Before you write a bug, rule these out** — a quick session has no judge, so this check is the
only one (full entries: `## UI False Positive Patterns` in the knowledge base's
`learned-patterns.md`):
- a link that "does nothing" — `playwright-cli tab-list`: it may have opened a new tab;
- a label "missing" or "cut short" — an inline link splits it into separate nodes;
- list items "missing" — scroll the infinite-scroll sentinel into view and wait;
- images "broken" — lazy images below the fold load only once scrolled into view;
- a "dead" page — a development server compiling the route on its first request; reload;
- data that "changed on its own" — another session on the same account;
- an "error page" — a firewall, bot-challenge or rate-limit interstitial in front of the app.
For each bug: `playwright-cli screenshot --filename=output/sessions/<session-dir>/screenshots/BUG-NNN.png` and document immediately.
When you are done with an area — fully tested or only partly — capture it under its charter ID
(lowercase ASCII slug; at least one per area you will report `tested` or `partial`; nothing
under `snapshots/` counts):
```bash
playwright-cli screenshot --filename=output/sessions/<session-dir>/screenshots/A<N>-<slug>.png
```
### 4. Report (2 min)
A quick session writes the **same** artefacts as a full one — never a quick-only report
format, never bugs inline in the chat — in the format of `output-contract.md`. Every file
starts with these two lines, verbatim:
```
> CONFIDENTIAL: This report may contain internal URLs, security vulnerabilities,
> and application details. Do not share outside your organization without review.
```
- `bugs/BUG-NNN.md` — one file per bug, header first, then
`# BUG-NNN: [Component] fails [Condition] causing [Impact]`, then `**Severity:**`,
`**Priority:**`, `**Component:**`, `**Area:** A<N>` (the charter row it was found in, or
`none`; never an area you report `not-tested`, `blocked` or `deferred`), `**URL:**`,
`**Environment:** Playwright CLI, Chromium, <viewport>`, `**Reproduction rate:**`, then
`## Summary`, `## Expected Behavior`, `## Actual Behavior`, `## Steps to Reproduce`,
`## Business Impact` (mandatory: Revenue / Trust / Regulatory / Data / Scale, "none
identified" where it does not apply), `## Evidence` (`- Screenshot:`, `- Video:`,
`- Log:`, `- Console errors:`, `- Network failures:`) and `## Recommended Fix Priority`
- `stats.json` — `kind: "quick"`, the eight required fields, `"contract": 2`, and one
`coverage.areas` entry per charter row: `{ "id": "A1", "status": "tested", "evidence": ["screenshots/A1-<slug>.png"] }`.
Status is `tested`, `partial`, `blocked`, `not-tested` or `deferred` (not reached in the
time box); every status but `tested` carries a `reason` of at most 160 characters with no
URL and no personal data; `evidence` paths sit under `screenshots/`, `videos/`, `traces/`,
`logs/` or `evidence/`, never `snapshots/`. Quick has no `--continue`, so no `continues`.
Never write `coverage_level`.
- then compute the coverage level — it validates the charter table, the areas, the evidence
and every bug's `**Area:**` line, and on exit 1 names each violation and its fix:
```bash
qualiow session level output/sessions/<session-dir> --write
```
On exit 0 it writes `evidence-level.md`, `backlog.md` and `stats.json` `coverage_level`.
Never write or edit those by hand. A quick session's level is never higher than
`qualified`. The level is a computed coverage fact, never a ship probability or a release
verdict.
- `session-report.md` — `Kind: quick`; `## Executive Summary`; `## Coverage Level` (the body
of `evidence-level.md` after its confidentiality header, copied verbatim — never
recomputed or reworded); `## Summary Stats`;
`## Coverage Map` (`| Area | Risk | Status | Bugs | Notes |`, one row per charter area,
the Area cell starting with its ID); `## Bugs Found`; `## Observations`;
`## Areas Not Tested`; `## Recommendations`; `## Session Stats`
Then finalize:
```bash
qualiow session finalize output/sessions/<session-dir>
```
It validates `stats.json`, checks the confidentiality header on every artefact and scans them
against the redaction list and for the literal values of the target's credential variables,
re-checks contract 2 (a level that is missing or stale after a later
edit: re-run `qualiow session level <dir> --write`), then appends the session row to `output/sessions/INDEX.md` and one
row per bug to `output/bugs/all-bugs.md`, records the metrics and writes
`evidence-manifest.json` (every evidence file with its size and SHA-256; never write or edit
it by hand). On exit 1 it names each
offending file: fix it and run again (`--check` validates without writing). Resolve the
`qualiow` prefix per `${CLAUDE_SKILL_DIR}/../qa-explore/references/paths.md`.
Then close the session:
```bash
playwright-cli close
playwright-cli delete-data
```
Present the summary to the user.
## Rules
- 15 minutes max
- Snapshot before every interaction
- ONE BUG = ONE `bugs/BUG-NNN.md`
- Evidence (screenshot / console / requests) for every bug
Wersje
W bazie nie ma innych skilli o nazwie qa-explore-quick.
Identyczna treść występuje jeszcze w 1 innych folderach na GitHubie. Tu pokazujemy jedną, najlepiej ocenioną kopię.
Migawka bazy z 13.11.2026 · wersja paczki 48966f9d04ae (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100planning-exploratory-testing
Prowadzi sesyjne testy eksploracyjne: pisze karty sesji, ogranicza czas, stosuje heurystyki pokrycia i tury, zapisuje notatki jako dowody, a ustalenia zamienia w zgłoszenia błędów i kandydatów do automatyzacji. - 100exploratory-testing
Prowadzi testowanie eksploracyjne oparte na karcie: sonduje działający endpoint heurystykami, ocenia jakość karty, uruchamia ekspansję adwersaryjną i klasyfikuje defekty do raportu. - 100explore-session
Prowadzi sesję testowania eksploracyjnego bez wymagań: karta, eksploracja w żywej przeglądarce, zamiana przepływów i anomalii na testy playwright-bdd oraz zgłoszenie błędów po zatwierdzeniu. - 100exploratory-testing
Prowadzi ustrukturyzowane sesje testowania eksploracyjnego z kartami testów, limitem czasu i heurystykami, bez wcześniej zapisanych skryptów. - 100qa-explore
Przeprowadza pełną eksploracyjną sesję testów aplikacji webowej jak główny inżynier QA: rozumie biznes, szereguje ryzyko i pisze raporty błędów. - 100quick-review
Przegląda diff lub plik pod kątem błędów logicznych, problemów bezpieczeństwa i uproszczeń, z jedną uwagą w wierszu.