match-grade
/match-grade
Dopasowuje kolory montażu do filmu referencyjnego, mierząc cienie, światła, jasność i nasycenie oraz poprawiając szumy w nocnych ujęciach.
- Autor
- kanishk-gangwar ↗
- Repozytorium
- filmcraft-mcp ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 07.11.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 2
- Skrypty
- 1
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 07.11.2026, bez odwołań do wycofanych modeli i API.
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
- 1 skrypt w paczce. Przejrzyj je przed instalacją, bo Claude może je uruchomić.
Skrypty: scripts/color_stats.py
Co robi i kiedy
Dopasowuje kolory montażu do filmu referencyjnego, mierząc cienie, światła, jasność i nasycenie oraz poprawiając szumy w nocnych ujęciach.
Wyzwalacze z opisu
Oryginalny opis (EN)
Colour-grade an edit to match a reference video's look by measuring it — shadow neutrality, highlight warmth, brightness, saturation — and tuning Lumetri until the numbers line up, plus per-shot corrections by kind of light and gentle handling of noisy night shots. Use it whenever the user says the reference "has a warmth/vibe/filter ours doesn't", asks for a cinematic or film look, a specific colour feel, or complains about grain, washed-out or grey footage in an edit.
Jak działa
- 1. Measure the reference
- 2. Per-shot correction (by light)
- 3. Overall look on an adjustment layer
- 4. Compare and iterate
Podgląd SKILL.md
---
name: match-grade
description: Colour-grade an edit to match a reference video's look by measuring it — shadow neutrality, highlight warmth, brightness, saturation — and tuning Lumetri until the numbers line up, plus per-shot corrections by kind of light and gentle handling of noisy night shots. Use it whenever the user says the reference "has a warmth/vibe/filter ours doesn't", asks for a cinematic or film look, a specific colour feel, or complains about grain, washed-out or grey footage in an edit.
---
# Matching a grade
Eyeballing a look ("warm", "teal-orange") usually lands in the wrong place — e.g. a teal preset
when the reference is actually neutral shadows with creamy yellow highlights. Measure both, compare,
adjust, measure again. Two layers: a per-shot correction (balances each clip's light) and one overall
look on an adjustment layer above everything.
`color_stats.py` reports mean RGB in shadows / midtones / highlights, overall brightness and
saturation; with `--ref` and `--ours` it prints which way to move.
## 1. Measure the reference
Use frames of the body (not the intro, not black bars or captions):
```bash
python3 ${CLAUDE_SKILL_DIR}/scripts/color_stats.py work/ref --crop 0,112,180,208 --every 6
```
Read it as: shadows R≈G≈B → neutral shadows; highlights with B well below R → warm/creamy; overall
mean → exposure; saturation → how punchy.
## 2. Per-shot correction (by light)
Give each shot a look that fixes its own light before the overall grade (plan `look` field;
presets in recap-edit's build script):
- **haze** (grey sea/sky, overcast): +contrast, lower blacks, -highlights, +vibrance, slightly warm
- **golden** (sunset, sun in frame): -highlights to hold the sun, lift shadows a little
- **green** (forests, tea, waterfalls): +contrast, +vibrance
- **stage / indoor**: moderate contrast; indoor sports +exposure
- **night**: no contrast boost and no shadow lift — they amplify sensor noise; pull blacks down instead,
add `vr_denoise` 40–50 on the worst shots only. Heavy denoise or a median filter softens the image;
users notice blur more than grain.
Denoise goes before Lumetri in the effect order.
## 3. Overall look on an adjustment layer
Start from the measurements, e.g. for "neutral shadows, warm creamy highlights, slightly darker":
```json
{"temperature": 2, "contrast": 18, "exposure": -0.2, "blacks": -16, "whites": 18,
"curve_red": [[0,0],[0.15,0.13],[0.8,0.83],[1,1]],
"curve_blue": [[0,0.01],[0.15,0.17],[0.45,0.45],[1,0.84]], "vignette_amount": -0.7}
```
Curves let you warm highlights while keeping shadows neutral — temperature alone warms everything.
Skip film grain on footage that is already noisy.
## 4. Compare and iterate
Render frames of the edit (`export_frames(every: 0.2)` or check-render `--keep`), then:
```bash
python3 ${CLAUDE_SKILL_DIR}/scripts/color_stats.py --ref work/ref --ref-crop 0,112,180,208 --ours work/edit_frames
```
Apply the advice, re-render frames, compare again. Two or three rounds usually get every zone within a
few levels. Then look at the night shots, faces and skies by eye — numbers can match while skin goes
orange.
Pliki w paczce (2)
- SKILL.md 3 KB
- scripts/color_stats.py 4 KB
Wersje
W bazie nie ma innych skilli o nazwie match-grade.
Migawka bazy z 13.11.2026 · wersja paczki 8c8f1cf4309c (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 90video-look-match
Dopasowuje gradację kolorów do wzorcowego kadru, chroniąc odcienie skóry i szczegóły światła. - 100fullgrade
Koryguje automatycznie jasność, kolor i balans bieli w wideo, dekoduje nagrania LOG i HDR z iPhone'a oraz dopasowuje ujęcia. - 100realistic-color-grade
Poprawia kolory nagrania tak, by wyglądały naturalniej: łagodna korekcja, korekta połysku skóry i delikatne ziarno, dobrane do każdego filmu. - 100altocue-grade
Koryguje kolory wideo z kodu: zamienia HDR na SDR, ustawia balans bieli i ekspozycję oraz nakłada look lub LUT .cube. - 100realistic-color-grade
Nadaje wideo naturalne barwy: delikatną korekcję, poprawę skóry i ziarno, żeby materiał wygenerowany przez AI nie wyglądał plastikowo. - 100reel-grammar
Mierzy gramatykę montażu materiału referencyjnego: długości ujęć, rytm, łączenia, jasność i kolor, i sprawdza każdy szkic względem niej.