Przejdź do treści
Biblioteka skilli
Programowanie · Testowanie

lus-simulate

/lus-simulate

Uruchamia i porównuje symulacje systemu LASER UAV w Gazebo Classic i SITL, z powtarzalnymi scenariuszami eksperymentów algorytmicznych.

Licencja
BSD-3-Clause
Ostatnia zmiana repozytorium
03.11.2026

Ocena i bezpieczeństwo

85/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść20 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
Pliki w paczce
3
Skrypty
0
Komentarze HTML
0
Adresy URL w SKILL.md
0
Przestarzałość

Brak sygnałów. Repozytorium zmienione 03.11.2026, bez odwołań do wycofanych modeli i API.

Licencja

BSD-3-Clause, otwarta.

Co robi i kiedy

Uruchamia i porównuje symulacje systemu LASER UAV w Gazebo Classic i SITL, z powtarzalnymi scenariuszami eksperymentów algorytmicznych.

Oryginalny opis (EN)

Explain, prepare, run or compare LASER UAV System (LUS) simulations in the supplied Gazebo Classic and SITL setup. Use for simulation startup, scenarios, sensor models and repeatable algorithm experiments; use diagnosis for an unexplained failure.

Jak działa

  1. Prepare the experiment
  2. Execute and observe
  3. Compare and report
Sekcje z nagłówków SKILL.md, w oryginale · 31 linii, 420 słów
Podgląd SKILL.md
---
name: lus-simulate
description: Explain, prepare, run or compare LASER UAV System (LUS) simulations in the supplied Gazebo Classic and SITL setup. Use for simulation startup, scenarios, sensor models and repeatable algorithm experiments; use diagnosis for an unexplained failure.
---

# Simulate with LUS

Answer in the user's language and write experiment files and reports in English. Distinguish a request for instructions, a request to start components and a request to perform a simulated flight.

Read [the Gazebo Classic procedure](references/gazebo-classic.md). Inspect the selected scripts and session in the current checkout before executing them.

## Prepare the experiment

Identify the workspace, firmware, vehicle, world, sensors and algorithm configuration. Inspect running processes and ROS graph state before starting duplicates. Confirm simulation-clock settings and that command topics belong to the intended simulated vehicle; `REAL_UAV=false` alone does not isolate a ROS network from physical devices.

The supplied PX4 session starts an autostart node that requests arming and takeoff. If the user only requested component startup, choose the manual path or an experiment-specific session without autostart. If the user requested a simulated flight, that existing authorization covers the corresponding simulated actions; do not ask for it again. Physical actuation requires a request covering the actual hardware.

Use a known baseline before evaluating a new algorithm when the environment has not yet been established. Do not silently change calibration or controller gains to make an experiment appear successful.

## Execute and observe

Start only the components required by the scenario. Check process readiness, `/clock`, lifecycle states, fresh odometry, command compatibility and reference availability as appropriate. A tmux pane or Gazebo window is not evidence of a working pipeline.

Set a finite observation period or mission-completion condition. Collect relevant logs, diagnostics or rosbag data without unbounded recording. If the environment cannot run the GUI, firmware or required packages, identify the blocker and provide a precise next step instead of claiming simulation success.

Record processes and sessions started for the task. Stop or clean up only those resources, following the user's request; do not kill unrelated ROS, DDS or simulator processes.

## Compare and report

Keep world, vehicle calibration, sensor configuration, initial conditions, mission and relevant seeds consistent across comparisons. Record resolved repository revisions, dirty changes, parameter files, exact commands and output locations. Changes to timestep or control rates are part of the experimental treatment and must be stated.

Use metrics appropriate to the question: tracking error, completion rate, collisions, computation time, estimation error or map quality. Confirm success criteria with the researcher if they are not supplied and cannot be inferred. Ground-truth comparisons need aligned frames and timestamps.

Report observed behavior and limitations separately from build and unit-test results. Provide enough information to repeat the run. A successful scenario does not establish general stability or hardware readiness.
Pliki w paczce (3)
  • SKILL.md 3 KB
  • agents/openai.yaml 1 KB
  • references/gazebo-classic.md 4 KB

Wersje

W bazie nie ma innych skilli o nazwie lus-simulate.

Migawka bazy z 13.11.2026 · wersja paczki d49f9d1a1654 (skrót SHA-256 całej paczki)

Pobrania w ostatnich 30 dniach: 0 · ranking

Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.

Podobne skille

  • 85lus-configure
    Sprawdza i konfiguruje instalację systemu LASER UAV, przestrzeń roboczą ROS, firmware, płatowiec, łańcuch czujników i profil algorytmów.
  • 85lus-diagnose
    Bada błędy budowania, brakujące dane, awarie cyklu życia, puste mapy i problemy estymatora w systemie LASER UAV na podstawie logów.
  • 100matlab-create-uav-scenario
    Tworzy i symuluje scenariusze UAV w MATLAB-ie przez uavScenario: teren, budynki, platformy i czujniki GPS oraz IMU, z pętlą ustawiania i przesuwania symulacji.

Uwagi i zgłoszenia

Wiadomość trafi do Bartosza Sokolińskiego. Adres e-mail jest potrzebny tylko do odpowiedzi. Szczegóły w polityce prywatności.