inventor-assemblies
/inventor-assemblies
Buduje i naprawia zestawy Autodesk Inventor przez narzędzia MCP: umieszcza części, ustala więzy i sprawdza elementy pływające.
- Autor
- Antniom ↗
- Repozytorium
- Inventor-PluginV2 ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 12.11.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 1
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 12.11.2026, bez odwołań do wycofanych modeli i API.
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
Co robi i kiedy
Buduje i naprawia zestawy Autodesk Inventor przez narzędzia MCP: umieszcza części, ustala więzy i sprawdza elementy pływające.
Oryginalny opis (EN)
Build and fix Autodesk Inventor assemblies (.iam) through the inventor MCP tools — placing parts and subassemblies, grounding the base part, mate/flush/angle/insert constraints, making subassemblies rigid, and checking for parts that float. Use when the user wants to create an assembly, put parts together, constrain or align components, or asks why an assembly moves or falls apart. For moving mechanisms (doors, drawers, hinges, travel limits) also use inventor-kinematics.
Jak działa
- Workflow
- Constraints
- Subassemblies
- When something is wrong
Podgląd SKILL.md
---
name: inventor-assemblies
description: Build and fix Autodesk Inventor assemblies (.iam) through the inventor MCP tools — placing parts and subassemblies, grounding the base part, mate/flush/angle/insert constraints, making subassemblies rigid, and checking for parts that float. Use when the user wants to create an assembly, put parts together, constrain or align components, or asks why an assembly moves or falls apart. For moving mechanisms (doors, drawers, hinges, travel limits) also use inventor-kinematics.
---
# Assemblies
If the `inventor-company-profile` skill is loaded, follow its rules first (assembly templates,
folder structure, naming, Content Center use).
## Workflow
1. `create_assembly(name=…, template="metric" | "<company .iam template>")` or `open_document(path)`.
2. Place the **base part first** with `add_component(component_path, x_mm, y_mm, z_mm)`.
The result gives the occurrence name (e.g. `Frame:1`) — use it in every later call.
3. Ground the base part: `manage_subassembly_kinematics(action="set_grounded", occurrence_name="Frame:1")`.
4. Place the other components near where they belong, then constrain each one.
5. `inspect_assembly_kinematics` — fix every warning (floating parts, unhealthy constraints,
no grounded part).
6. `save_document` when the user wants it saved.
## Constraints
`add_assembly_constraint(occ1_name, entity1_type, entity1_idx, occ2_name, entity2_type, entity2_idx,
constraint_type, offset, name, min_limit, max_limit)`
- **Entities** are addressed per part:
- `plane` 1 = YZ, 2 = XZ, 3 = XY; `axis` 1 = X, 2 = Y, 3 = Z; `point` 1 = center point.
- `face` / `edge` = index in body 1 of that part. To find one, `open_document(<part file>)`, use
`list_faces` / `find_face`, then switch back to the assembly.
- **Prefer origin planes and axes** over faces and edges — they never renumber when the part changes.
- `offset` is in **mm** for mate/flush/insert and in **degrees** for angle.
- Types:
- `mate`: faces/planes against each other (normals opposed), axis-to-axis.
- `flush`: same direction, coplanar.
- `angle`: rotation between planes.
- `insert`: circular edges (a bolt into a hole).
- Name every constraint (`name="Hinge_Angle"`). The kinematics tools refer to constraints by name.
- A part is fully placed when its translations and rotations are all removed. Typically that
takes three plane constraints, or an insert plus one angle/flush.
## Subassemblies
- A subassembly's internal parts must not fall apart in the parent. Before inserting it:
`manage_subassembly_kinematics(action="enforce_rigidity", occurrence_name="<subassembly>:1",
exclude_keywords=["Door", "Slide"])`.
- This grounds only parts that have no constraints or joints.
- Parts whose names match `exclude_keywords` (the moving ones) are never grounded.
- Nothing is saved.
- If a subassembly must move inside its parent (e.g. a rotating drum), set
`manage_subassembly_kinematics(action="set_flexible", occurrence_name=…, value=True)`.
## When something is wrong
- **Part flies away when dragged:** it has no constraints and is not grounded. See the
`inspect_assembly_kinematics` warnings.
- **Constraint "InError" / "Inconsistent":** two constraints disagree. Delete the newest one
(`delete_assembly_constraint(name)`) and re-check.
- **"Occurrence not found":** the error lists the existing top-level occurrence names. Use one exactly.
- **Inventor seems stuck:** `check_health_and_popups`. A dialog may be open.
Wersje
W bazie nie ma innych skilli o nazwie inventor-assemblies.
Migawka bazy z 13.11.2026 · wersja paczki 940d1989dad6 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 90inventor-kinematics
Ustawia ruch mechanizmów w Autodesk Inventor: zawiasy, suwaki, ograniczenia skoku i pozycje otwarcia lub zamknięcia. - 90inventor-diagnostics
Rozwiązuje problemy z automatyzacją Autodesk Inventor: zawieszone wywołania, okna blokujące i elementy, które się nie przebudowały. - 91kernelcad-assemblies
Buduje złożenia wieloczęściowe w KernelCAD: części, łączniki, siedem typów połączeń i metadane przegubów. - 100fusion-print-design
Tworzy i poprawia części mechaniczne do druku, sprawdza zespoły i eksportuje zweryfikowane modele przez Autodesk Fusion MCP. - 95vcad-assembly
Składa wieloczęściowe zestawy z przegubami i uruchamia symulacje fizyczne mechanizmów, np. ramion robotów. - 98inventor-addin-scaffold
Tworzy szkielet wtyczki do Autodesk Inventor 2025 w .NET 8 z architekturą warstwową, logowaniem i obsługą wyjątków.