input-handling
/input-handling
Pomaga implementować obsługę wejścia w Godot: system InputEvent, akcje Input Map, kontrolery i gamepady, mysz i dotyk, zmianę przypisań klawiszy oraz architekturę wejścia.
- Autor
- jame581 ↗
- Repozytorium
- godotprompter ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 24.10.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 7
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 1
Brak sygnałów. Repozytorium zmienione 24.10.2026, bez odwołań do wycofanych modeli i API.
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
Co robi i kiedy
Pomaga implementować obsługę wejścia w Godot: system InputEvent, akcje Input Map, kontrolery i gamepady, mysz i dotyk, zmianę przypisań klawiszy oraz architekturę wejścia.
Oryginalny opis (EN)
Use when implementing input — InputEvent system, Input Map actions, controllers/gamepads, mouse/touch, action rebinding, and input architecture
Jak działa
- 1. Core Concepts
- 2. Input Map Setup
- 3. Reading Input — Events vs Polling
- 4. Mouse Input
- 5. Controller / Gamepad Support
- 6. Touch Input
- 7. Action Rebinding at Runtime
- 8. Consuming and Propagating Input
- 9. Common Pitfalls
- 10. Implementation Checklist
Podgląd SKILL.md
---
name: input-handling
description: Use when implementing input — InputEvent system, Input Map actions, controllers/gamepads, mouse/touch, action rebinding, and input architecture
---
# Input Handling in Godot 4.3+
All examples target Godot 4.3+ with no deprecated APIs. GDScript is shown first, then C#.
> **Related skills:** **player-controller** for movement driven by input, **godot-ui** for UI input focus and navigation, **save-load** for persisting custom key bindings, **responsive-ui** for touch vs desktop input adaptation, **xr-development** for XR controller and hand tracking input, **mobile-development** for mobile sensors and app lifecycle.
---
## 1. Core Concepts
### Input Flow
```
Hardware Event (key, mouse, gamepad)
↓
Engine converts to InputEvent
↓
_input() ← raw input, runs first
↓
UI Control nodes ← _gui_input: buttons, sliders consume events
↓
_shortcut_input() ← for global shortcuts
↓
_unhandled_key_input() ← unhandled key-only events
↓
_unhandled_input() ← game input (movement, actions)
```
### Where to Handle Input
| Method | Use For | When It Runs |
|---------------------------|--------------------------------------------|------------------|
| `_input()` | Camera look, global hotkeys | First — before everything |
| `_shortcut_input()` | Global shortcuts (pause, screenshot) | After UI, before unhandled |
| `_unhandled_key_input()` | Key-only events that UI didn't consume | After UI, keys only |
| `_unhandled_input()` | Gameplay actions (jump, attack, interact) | Last — after UI consumes |
| `Input.is_action_pressed()` in `_physics_process()` | Continuous movement | N/A — polling, not event-driven |
**Rule of thumb:** Use `_unhandled_input()` for discrete game actions (jump, attack). Use `Input` polling in `_physics_process()` for continuous movement. Use `_input()` only when you need input before UI consumes it (e.g., mouse look).
### InputEvent Hierarchy
```
InputEvent
├── InputEventFromWindow
│ ├── InputEventWithModifiers
│ │ ├── InputEventKey ← keyboard
│ │ ├── InputEventMouse
│ │ │ ├── InputEventMouseButton ← mouse clicks
│ │ │ └── InputEventMouseMotion ← mouse movement
│ │ └── InputEventGesture ← Magnify / Pan gestures
│ ├── InputEventScreenTouch ← touchscreen tap
│ └── InputEventScreenDrag ← touchscreen drag
├── InputEventJoypadButton ← gamepad buttons
├── InputEventJoypadMotion ← gamepad sticks/triggers
├── InputEventAction ← synthetic action events
├── InputEventMIDI ← MIDI devices
└── InputEventShortcut
```
---
## 2. Input Map Setup
Define actions in **Project > Project Settings > Input Map** instead of checking raw keycodes. This decouples game logic from specific keys and enables rebinding.
### Default Project Actions
Godot ships with `ui_*` actions: `ui_accept`, `ui_cancel`, `ui_left`, `ui_right`, `ui_up`, `ui_down`, etc. These are used by UI controls for keyboard navigation. You can use them for gameplay but creating custom actions is preferred to avoid conflicts.
### Adding Actions in Code
Actions can be created at runtime with `InputMap.add_action()` + `InputMap.action_add_event()` — typically in an autoload `_ready()`, guarded by `InputMap.has_action()`. Define actions in the editor Input Map; only add them in code for dynamically generated bindings or mod support.
> See [references/action-rebinding.md](references/action-rebinding.md) for the GDScript and C# snippet.
### Recommended Action Names
Use descriptive, game-specific names instead of key names:
| Good | Bad | Why |
|---------------------|------------------|--------------------------------------|
| `move_left` | `press_a` | Decoupled from physical key |
| `attack` | `left_click` | Works for mouse and gamepad |
| `interact` | `press_e` | Rebindable without changing logic |
| `sprint` | `hold_shift` | Input-agnostic |
| `pause` | `press_escape` | Can map to gamepad Start button too |
---
## 3. Reading Input — Events vs Polling
### Event-Driven (Discrete Actions)
Use `_unhandled_input()` for one-shot actions: jump, attack, interact, pause.
#### GDScript
```gdscript
func _unhandled_input(event: InputEvent) -> void:
if event.is_action_pressed("jump"):
_jump()
get_viewport().set_input_as_handled() # prevent further propagation
if event.is_action_pressed("interact"):
_interact()
if event.is_action_pressed("pause"):
get_tree().paused = not get_tree().paused
get_viewport().set_input_as_handled()
```
#### C#
```csharp
public override void _UnhandledInput(InputEvent @event)
{
if (@event.IsActionPressed("jump"))
{
Jump();
GetViewport().SetInputAsHandled();
}
if (@event.IsActionPressed("interact"))
Interact();
if (@event.IsActionPressed("pause"))
{
GetTree().Paused = !GetTree().Paused;
GetViewport().SetInputAsHandled();
}
}
```
### Polling (Continuous Input)
Use `Input` singleton in `_physics_process()` for held buttons and analog axes.
#### GDScript
```gdscript
func _physics_process(delta: float) -> void:
# Movement vector from 4 directional actions
var direction := Input.get_vector("move_left", "move_right", "move_up", "move_down")
velocity = direction * speed
# Check if a button is held
if Input.is_action_pressed("sprint"):
velocity *= 1.5
move_and_slide()
```
#### C#
```csharp
public override void _PhysicsProcess(double delta)
{
Vector2 direction = Input.GetVector("move_left", "move_right", "move_up", "move_down");
Velocity = direction * Speed;
if (Input.IsActionPressed("sprint"))
Velocity *= 1.5f;
MoveAndSlide();
}
```
### Key Input Methods
| Method | Returns | Use For |
|-----------------------------------|---------|--------------------------------------|
| `Input.is_action_pressed()` | `bool` | Held buttons (sprint, crouch, fire) |
| `Input.is_action_just_pressed()` | `bool` | One-shot triggers (jump, interact) |
| `Input.is_action_just_released()` | `bool` | Release triggers (variable jump cut) |
| `Input.get_action_strength()` | `float` | Analog pressure (0.0–1.0) |
| `Input.get_axis()` | `float` | Single axis (-1.0 to 1.0) |
| `Input.get_vector()` | `Vector2` | 2D direction, length capped at 1 |
| `event.is_action_pressed()` | `bool` | Check in `_unhandled_input` callback |
| `event.is_action_released()` | `bool` | Check in `_unhandled_input` callback |
> **`Input.is_action_just_pressed()` in `_physics_process()` reports a press on the next physics tick**, even if the key was already released — a low tick rate does not drop taps, but several presses inside one tick count once. When each press matters, catch it in `_unhandled_input()` and set a flag.
### Input Buffering
Buffer discrete actions so a press made shortly before it can take effect (jump just before landing) still counts: catch the action in `_unhandled_input()`, set a flag with a short timer (0.1 s is typical), and consume the flag in `_physics_process()`.
> See [references/input-buffering.md](references/input-buffering.md) for the full GDScript and C# jump-buffer implementation.
---
## 4. Mouse Input
`InputEventMouseMotion.relative` for camera look (with `Input.MOUSE_MODE_CAPTURED`), `InputEventMouseButton` for clicks. Mouse modes: `VISIBLE`, `HIDDEN`, `CAPTURED`, `CONFINED`. Custom cursor via `Input.set_custom_mouse_cursor(texture, shape, hotspot)`.
> See [references/mouse.md](references/mouse.md) for the full GDScript and C# recipes (camera-look with sensitivity + invert toggle, mouse-mode switching, button events, custom cursor with shape variants).
---
## 5. Controller / Gamepad Support
`Input.get_connected_joypads()` for runtime detection, `Input.joy_connection_changed` signal for hot-plug. Use Input Map actions with joypad button events for portability. Analog sticks: `Input.get_vector("left", "right", "up", "down", deadzone)` returns a length-clamped Vector2 with built-in deadzone.
> See [references/gamepad.md](references/gamepad.md) for the GDScript and C# recipes (controller detection, deadzone analog reading, vibration via `start_joy_vibration`, motion sensors, detecting last-input-device for UI prompt swapping).
> **Godot 4.7+:** Joypad motion sensors — `Input.get_joy_accelerometer(device)` / `get_joy_gyroscope(device)` (both `Vector3`), guarded by `has_joy_motion_sensors()` and enabled with `set_joy_motion_sensors_enabled()`; recipe in [references/gamepad.md](references/gamepad.md). Vibration is now queryable — `Input.has_joy_vibration(device)` plus `get_joy_vibration_strength/duration/remaining_duration()`. `JoyButton` gains `JOY_BUTTON_MISC2` (`21`) through `JOY_BUTTON_MISC6` (`25`) (C#: `JoyButton.Misc2`…). New project setting `input_devices/joypads/ignore_joypad_on_unfocused_application` (default `false`) ignores joypad input (including motion sensors) and LED changes and stops vibration while the app is unfocused.
---
## 6. Touch Input
`InputEventScreenTouch` for tap/release, `InputEventScreenDrag` for finger drag; multi-touch is tracked by `event.index`. To test on desktop, enable **Project Settings → Input Devices → Pointing → Emulate Touch From Mouse**; **Emulate Mouse From Touch** is on by default so UI works on touchscreens.
> See [references/touch.md](references/touch.md) for the touch event recipes (GDScript and C#) and the `VirtualJoystick` on-screen stick (Godot 4.7+).
---
## 7. Action Rebinding at Runtime
Three steps: (1) capture the user's chosen key via `_input` while in "rebinding" mode, (2) call `InputMap.action_erase_events(action)` then `InputMap.action_add_event(action, new_event)`, (3) persist via `ConfigFile` and reload on launch.
> See [references/action-rebinding.md](references/action-rebinding.md) for the full GDScript and C# rebinding flow including ConfigFile save/load and the typical "press a key" capture UI.
---
## 8. Consuming and Propagating Input
Input propagates in **reverse scene tree order** (the node lowest in the Scene dock first, root last); call `get_viewport().set_input_as_handled()` after consuming an event to stop it reaching other nodes. During pause, only nodes with `process_mode` `PROCESS_MODE_ALWAYS` or `PROCESS_MODE_WHEN_PAUSED` receive input.
> See [references/event-propagation.md](references/event-propagation.md) for the GDScript and C# recipes (stopping propagation, node processing order, receiving input while paused).
---
## 9. Common Pitfalls
| Symptom | Cause | Fix |
|--------------------------------------|--------------------------------------------------|--------------------------------------------------------------------|
| Action not recognized | Action name not defined in Input Map | Add the action in Project > Project Settings > Input Map |
| Fast repeated presses count once | `is_action_just_pressed()` polled in `_physics_process`; presses share one tick | Catch discrete actions in `_unhandled_input()` instead |
| Input still fires when UI is open | Using `_input()` instead of `_unhandled_input()` | Switch to `_unhandled_input()` so UI consumes events first |
| Mouse look works through menus | Mouse motion in `_input()` without mode check | Guard with `if Input.mouse_mode == Input.MOUSE_MODE_CAPTURED` |
| Gamepad stick drifts | Deadzone too low or not set | Set deadzone per-action in Input Map (0.2 is a good default) |
| Controller not detected | Not connected before game start | Connect `joy_connection_changed` signal, handle hot-plug |
| Key rebinding captures modifier keys | No filter for Shift/Ctrl/Alt alone | Skip events where keycode is a modifier key |
| Touch input doesn't work on desktop | "Emulate Touch From Mouse" is disabled | Enable in Project Settings > Input Devices > Pointing |
| Pause menu ignores input while paused | Node `process_mode` is `INHERIT` (pauses with parent) | Set pause menu to `PROCESS_MODE_ALWAYS` |
| Action triggers twice per press | Same action checked in both `_input` and `_unhandled_input` | Pick one callback per action |
> ⚠️ **Changed in Godot 4.7:** Mouse and keyboard device IDs changed from `0` to `InputEvent.DEVICE_ID_MOUSE` (`32`) and `InputEvent.DEVICE_ID_KEYBOARD` (`16`), because some joypads use `0` as their device ID. Code checking `event.device == 0` to detect keyboard/mouse input silently breaks — compare against the constants or check the event type (`event is InputEventKey`) instead. See the [4.7 migration guide](https://docs.godotengine.org/en/latest/tutorials/migrating/upgrading_to_godot_4.7.html).
---
## 10. Implementation Checklist
- [ ] All gameplay actions are defined in the Input Map — no raw keycodes in game logic
- [ ] Discrete actions (jump, attack) use `_unhandled_input()`, not polling in `_physics_process()`
- [ ] Continuous input (movement, sprint) uses `Input.get_vector()` / `Input.is_action_pressed()` in `_physics_process()`
- [ ] Mouse look guards on `Input.mouse_mode == MOUSE_MODE_CAPTURED` to avoid rotating through menus
- [ ] Each Input Map action has both keyboard and gamepad bindings for controller support
- [ ] Gamepad deadzone is set per-action in Input Map (new actions: 0.5 on 4.3, 0.2 from 4.4)
- [ ] Pause menu node has `process_mode = PROCESS_MODE_ALWAYS` to receive input while paused
- [ ] `get_viewport().set_input_as_handled()` is called after consuming events that shouldn't propagate
- [ ] Input device detection exists if showing keyboard vs gamepad UI prompts
- [ ] Key rebinding saves to and loads from `user://` on game launch
Pliki w paczce (7)
- SKILL.md 13 KB
- references/action-rebinding.md 6 KB
- references/event-propagation.md 1 KB
- references/gamepad.md 6 KB
- references/input-buffering.md 2 KB
- references/mouse.md 4 KB
- references/touch.md 3 KB
Wersje
| Repozytorium | Wynik | Licencja |
|---|---|---|
| Ta strona · jame581/godotprompter | 100 | MIT |
| zenobi-us/dotfiles | 100 | MIT |
| JosiahSiegel/claude-plugin-marketplace | 90 | MIT |
Migawka bazy z 13.11.2026 · wersja paczki 1a7888c9a29a (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100godot-input-handling
Dostarcza wzorce obsługi wejścia w Godot: akcje InputMap, przetwarzanie InputEvent, obsługa kontrolerów, zmiana przypisań, martwe strefy i bufor wejścia. - 100godot-input-handling
Dostarcza wzorce obsługi wejścia w Godot: akcje InputMap, przetwarzanie InputEvent, obsługa kontrolerów, zmiana przypisań, martwe strefy i bufor wejścia. - 100godot-modernize-input
Modernizuje obsługę wejścia w Godot 4.x: generuje konfiguracje Input Map z twardych sprawdzeń klawiszy, dodaje wibracje pada, żyroskop, akcelerometr i bufor wejścia. - 100unity-input
Opisuje obsługę sterowania w Unity 6 przez nowy Input System: Input Actions, Action Maps, Control Schemes, komponent PlayerInput, gamepady, klawiaturę, dotyk, kontrolery XR i debugowanie. - 100browser-input-action-system
Mapuje klawiaturę, mysz, pady i dotyk w grze w przeglądarce, z przypisywaniem klawiszy i cyklem życia urządzeń. - 100input-system
Obsługuje wejście gracza w Godot na klawiaturze, myszy, gamepadzie i dotyku: akcje wejścia, wirtualne joysticki, tryby myszy i system zmiany przypisań.