Przejdź do treści
Biblioteka skilli
Finanse i księgowość · Automatyzacja

idt-entry

/idt-entry

Obserwuje ustawienie na wykresach NSE i BSE świeca po świecy i wskazuje moment wejścia po zamknięciu pięciominutowej świecy poza zakresem otwarcia.

Licencja
MIT
Ostatnia zmiana repozytorium
04.11.2026

Ocena i bezpieczeństwo

100/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść35 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
Pliki w paczce
1
Skrypty
0
Komentarze HTML
0
Adresy URL w SKILL.md
0
Przestarzałość

Brak sygnałów. Repozytorium zmienione 04.11.2026, bez odwołań do wycofanych modeli i API.

Licencja

MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.

Co robi i kiedy

Obserwuje ustawienie na wykresach NSE i BSE świeca po świecy i wskazuje moment wejścia po zamknięciu pięciominutowej świecy poza zakresem otwarcia.

Wyzwalacze z opisu

tell me when to get inwatch NIFTYhas it broken outdid it break the opening range

Argumenty

/idt-entry SYMBOL [--setup orb|pdh|level] [--above X] [--below Y]
Oryginalny opis (EN)

Entry Timer for NSE/BSE intraday setups. Watches a setup bar by bar and says the moment to get in: builds the 09:15 IST opening range (15 minutes by default) and calls the entry on the first COMPLETED 5-minute bar that CLOSES beyond it, beyond the previous day's high/low, or beyond a level you give, with an optional volume check. Says waiting (and how far), triggered (time, price, how stale), expired, or closed, and writes idt/setup.json for /idt-exit. It never places an order. Use when the user says "tell me when to get in", "watch NIFTY", "has it broken out", "did it break the opening range"

Jak działa

  1. What it reads and writes
  2. The rule
  3. Output
  4. Steps
  5. Example (fixtures, 2026-10-29)
  6. Rules
  7. What it never does
  8. Safety
Sekcje z nagłówków SKILL.md, w oryginale · 99 linii, 937 słów
Podgląd SKILL.md
---
name: idt-entry
description: >-
  Entry Timer for NSE/BSE intraday setups. Watches a setup bar by bar and says the moment to get in:
  builds the 09:15 IST opening range (15 minutes by default) and calls the entry on the first
  COMPLETED 5-minute bar that CLOSES beyond it, beyond the previous day's high/low, or beyond a level
  you give, with an optional volume check. Says waiting (and how far), triggered (time, price, how
  stale), expired, or closed, and writes idt/setup.json for /idt-exit. It never places an order. Use
  when the user says "tell me when to get in", "watch NIFTY", "has it broken out", "did it break the
  opening range", "entry signal", "time my entry", or after /idt-scanner and /idt-news.
argument-hint: "SYMBOL [--setup orb|pdh|level] [--above X] [--below Y]"
---

# Entry Timer (`/idt-entry`)

The Entry Timer turns a setup into one moment: the bar that confirms it. It waits for each 5-minute
bar to finish. A price that pokes beyond the level in the middle of a bar is not an entry. A bar that
CLOSES beyond it is. Then it says the time and the price, writes them down for the Exit Planner, and
stops. It never buys anything. A clean signal does not make a trade win.

```bash
idt entry check NIFTY                               # opening-range breakout (default)
idt entry check NIFTY --write                       # on trigger, save idt/setup.json for /idt-exit
idt entry check RELIANCE --setup pdh                # close beyond the previous day's high / low
idt entry check BANKNIFTY --setup level --above 58500 --below 57900
idt entry check RELIANCE --min-volume-x 1.5         # trigger bar needs 1.5x the range bars' average volume
idt entry watch NIFTY --write --poll 60             # loop until triggered or expired (run in background)
idt --now "2026-10-29 09:45" entry check NIFTY      # replay a past moment
```

## What it reads and writes

| file | what |
| --- | --- |
| Dhan intraday bars | today's 5-minute bars (and recent sessions for ATR) |
| `idt/config.json` | `or_minutes` (15), `entry_expiry` (11:30, ORB only), `entry_cutoff` (15:00, pdh/level), `no_entries_before` (09:30), `min_volume_x` (off), `holidays` |
| `idt/setup.json` | with `--write` on a trigger: symbol, setup, side, entry, `trigger_time`, `trigger_close`, range, `atr` |

## The rule

- **Opening range (`orb`).** High and low of the bars from 09:15 to 09:15 + `or_minutes`: the 09:15,
  09:20 and 09:25 bars for 15 minutes. Long above the high, short below the low.
- **Previous day (`pdh`).** Above the previous session's high, or below its low.
- **Level (`level`).** `--above` and/or `--below` a price you give (a scanner `trigger`, a CPR level).
- **The trigger** is the first completed bar after the range that CLOSES beyond the level. A wick is
  not a trigger. A close exactly at the level is not beyond it.
- **The time** is the bar's close (`trigger_close`): the 09:35 bar closes at 09:40. The price is its close.
- **Only closed bars count.** A bar counts once the clock passes its start + 5 minutes. The bar still
  forming is shown under `forming` with "it does not count until it closes".
- **Time limits.** No entry on a bar that closes before `no_entries_before`. ORB setups expire at
  `entry_expiry`; pdh/level setups at `entry_cutoff`. Weekends and holidays: `closed`.
- **Volume, if you want it.** `--min-volume-x 1.5` also needs the trigger bar's volume at 1.5x the
  opening-range bars' average; thinner closes are listed under `skipped_thin`. The 09:15 bar holds the
  pre-open auction, so 1.0 is already strict. Spot indices have no volume: the check is skipped and
  `volume_note` says so (use the future for volume).
- **One trigger per setup per day:** the first qualifying close. Later closes do not reset it.

## Output

`state`: waiting / triggered / expired / closed. Waiting gives `last` and the distance to each level
in points and %. Triggered gives `side`, `entry`, `trigger_close`, `pct_beyond`, `volume_x`,
`minutes_since`, `last`, and `late` when the trigger is more than one bar old.

## Steps

1. Get the symbol from the user, or the one they picked from `/idt-scanner`. Check `/idt-news` first.
2. Run `idt entry check SYMBOL`. Tell the user the state in one line: waiting and how far, triggered
   at what time and price, or expired.
3. To wait for it, run `idt entry watch SYMBOL --write` in the background, or `idt entry check SYMBOL
   --write` on a `/loop` every 5 minutes. Report when the state changes.
4. When it triggers, say the time and the price, and that nothing was placed. If `late` is present,
   say it plainly: a late entry is a different trade.
5. Hand off to `/idt-exit` to set the stop and the target BEFORE anything is bought.

## Example (fixtures, 2026-10-29)

NIFTY's range is 25,905 to 25,985. At 09:38 the 09:35 bar is still forming, so it waits:

```
waiting  last close 25,975.00 (09:30 bar): +10.00 to the range high 25,985 (+0.04%), -70.00 to the low 25,905.
The 09:35 bar is still forming (25,995 so far, closes 09:40); it does not count until it closes.
```

At 09:45:

```
triggered long: the 09:35 bar closed 25,995.00 above 25,985.00 at 09:40 (+0.04%), 5 minutes ago.
Nothing was placed. Next: /idt-exit to set the stop and target first.
```

## Rules

- Bar by bar on Dhan 5-minute bars, which can lag. Say so when a minute matters.
- A signal is information, not an order, and not a promise.
- Never call an entry early because a bar looks like it will close beyond the level.

## What it never does

It never places an order, never sizes a position, never sets the stop (that is `/idt-exit`), never
moves the level after the fact, never counts a bar that has not closed, and never runs `/idt-broker`
from a background watch: nobody is there to say yes.

## Safety

- Education and tooling, not investment advice. A PASS from `/idt-risk` is a rules check, not a recommendation.
- Paper mode by default (`"mode": "paper"`). Live mode only changes where funds come from.
- Nothing in this pack places an order. `/idt-broker` builds a ticket only after `/idt-risk` passed that
  exact order hash in the last 10 minutes and the user typed yes for that hash; the user places it themselves.
- No shorting or naked options unless the config allows it and the user confirms.
- Dhan credentials live in environment variables. Never store or repeat the user's TOTP.

Wersje

W bazie nie ma innych skilli o nazwie idt-entry.

Migawka bazy z 13.11.2026 · wersja paczki 37e7acfb4d0c (skrót SHA-256 całej paczki)

Pobrania w ostatnich 30 dniach: 0 · ranking

Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.

Podobne skille

  • 100nse-entry
    Pilnuje wejścia w akcje NSE i BSE i sygnalizuje przebicie zakresu otwarcia po zamknięciu świecy, z opcjonalnym potwierdzeniem wolumenem.
  • 100nse-entry
    Śledzi ustawienie transakcji na świecach minutowych lub 5-minutowych i podaje moment wejścia po zamknięciu nad zakresem otwarcia.
  • 100nse-entry
    Obserwuje akcje NSE świeca po świecy i wskazuje moment wejścia, gdy świeca zamknie się powyżej zakresu otwarcia.
  • 100trader-in-entry
    Pokazuje moment wejścia na indyjskim rynku, świeca po świecy, gdy zamknięcie przebija zakres otwarcia lub wskazany poziom.
  • 100trader-entry
    Śledzi wykres świeca po świecy i wskazuje moment wejścia, gdy świeca zamyka się powyżej zakresu otwarcia lub wskazanego poziomu.
  • 100bharat-entry
    Obserwuje świecę po świecy setup na NSE i podaje moment wejścia po przebiciu zakresu otwarcia lub wskazanego poziomu.

Uwagi i zgłoszenia

Wiadomość trafi do Bartosza Sokolińskiego. Adres e-mail jest potrzebny tylko do odpowiedzi. Szczegóły w polityce prywatności.