gearboy-debugging
/gearboy-debugging
Debuguje i śledzi gry Game Boy, Game Boy Color i Super Game Boy w emulatorze Gearboy przez serwer MCP: debugowanie CPU SM83, breakpointy, inspekcja sprzętu, deasemblacja i śledzenie wykonania.
- Autor
- drhelius ↗
- Repozytorium
- gearboy ↗
- Licencja
- GPL-3.0
- Ostatnia zmiana repozytorium
- 25.10.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 2
- Skrypty
- 1
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 1
Brak sygnałów. Repozytorium zmienione 25.10.2026, bez odwołań do wycofanych modeli i API.
GPL-3.0, otwarta.
- 1 skrypt w paczce. Przejrzyj je przed instalacją, bo Claude może je uruchomić.
Skrypty: scripts/install.sh
Co robi i kiedy
Debuguje i śledzi gry Game Boy, Game Boy Color i Super Game Boy w emulatorze Gearboy przez serwer MCP: debugowanie CPU SM83, breakpointy, inspekcja sprzętu, deasemblacja i śledzenie wykonania.
Oryginalny opis (EN)
Debug and trace Game Boy / Game Boy Color / Super Game Boy games using the Gearboy emulator MCP server. Provides workflows for SM83 CPU debugging, breakpoint management, hardware inspection, disassembly analysis, and execution tracing. Use when the user wants to debug a Game Boy game, trace code execution, inspect CPU registers or hardware state, set breakpoints, analyze interrupts, step through SM83 instructions, reverse engineer game code, examine LCD, APU, or SGB registers, view the call stack, or diagnose rendering, audio, or timing issues. Also use when the user mentions Game Boy developm
Jak działa
- Overview
- MCP Server Prerequisite
- Debugging Workflow
- Rewind (Time Travel Debugging)
- Hardware Inspection
- Memory Areas
- Common Debugging Scenarios
- Organizing Your Debug Session
Podgląd SKILL.md
---
name: gearboy-debugging
description: >-
Debug and trace Game Boy / Game Boy Color / Super Game Boy games using the Gearboy emulator MCP
server. Provides workflows for SM83 CPU debugging, breakpoint management,
hardware inspection, disassembly analysis, and execution tracing. Use when the
user wants to debug a Game Boy game, trace code execution, inspect CPU
registers or hardware state, set breakpoints, analyze interrupts, step through
SM83 instructions, reverse engineer game code, examine LCD, APU, or SGB registers,
view the call stack, or diagnose rendering, audio, or timing issues. Also use
when the user mentions Game Boy development, GB/GBC/SGB homebrew testing, or SM83
debugging with Gearboy.
compatibility: >-
Requires the Gearboy MCP server. Direct tool mode is the default. Before
installing or configuring, call debug_get_status to check if the server is
already connected. If --mcp-router is enabled, use get_tool_info and
execute_tool for routed tools.
metadata:
author: drhelius
version: "1.0"
---
# Game Boy / Game Boy Color Debugging with Gearboy
## Overview
Debug Game Boy, Game Boy Color, and Super Game Boy games using the Gearboy emulator as an MCP server. Control execution (pause, step, breakpoints), inspect the SM83 CPU and hardware (LCD, APU, SGB, sprites), read/write memory, disassemble code, trace instructions, and capture screenshots — all through MCP tool calls.
## MCP Server Prerequisite
**IMPORTANT — Check before installing:** Before attempting any installation or configuration, you MUST first verify if the Gearboy MCP server is already connected in your current session. In the default mode, call `debug_get_status` directly. If Gearboy was intentionally started with `--mcp-router`, call `get_tool_info` with `{"name":"debug_get_status"}`, then call `execute_tool` with `{"name":"debug_get_status","arguments":{}}`. A valid response from either workflow means the server is active and ready.
Only if neither workflow is available or the call fails, you need to help install and configure the Gearboy MCP server:
### Installing Gearboy
Run the bundled install script (macOS/Linux):
```bash
bash scripts/install.sh
```
This installs Gearboy via Homebrew on macOS or downloads the latest release on Linux. It prints the binary path on completion. You can also set `INSTALL_DIR` to control where the binary goes (default: `~/.local/bin`).
Alternatively, download from [GitHub Releases](https://github.com/drhelius/Gearboy/releases/latest) or install with `brew install --cask drhelius/geardome/gearboy` on macOS.
### Connecting as MCP Server
Configure your AI client to run Gearboy as an MCP server via STDIO transport. For Claude Code:
```bash
claude mcp add --transport stdio --scope user gearboy -- /path/to/gearboy --mcp-stdio
```
For Codex:
```bash
codex mcp add gearboy -- /path/to/gearboy --mcp-stdio
```
Replace `/path/to/gearboy` with the actual binary path from the install script. Add `--headless` before `--mcp-stdio` on headless machines.
---
## Debugging Workflow
### 1. Load and Orient
```
load_media → get_media_info → get_cpu_status → get_screenshot
```
Start every session by loading the ROM, confirming it loaded correctly (MBC type, ROM/RAM size, CGB/SGB flags), then checking CPU state and taking a screenshot to understand the current game state. If a `.sym` or `.noi` file exists alongside the ROM, symbols are loaded automatically.
Load additional symbols with `load_symbols` or add individual labels with `add_symbol`. Gearboy supports RGBDS, GBDK-2020, WLA-DX, no$gmb, SDCC/NoICE (.noi), EQU, and generic symbol formats.
### 2. Pause and Inspect
Always call `debug_pause` before inspecting state. While paused:
- **CPU state**: `get_cpu_status` — registers A, F, B, C, D, E, H, L, SP, PC, flags Z/N/H/C, IME, halt state, CGB double speed
- **Disassembly**: `get_disassembly` with a start/end address range
- **Call stack**: `get_call_stack` — current subroutine hierarchy
- **Memory**: `read_memory` with area name (ROM0, ROM1, VRAM, RAM, WRAM0, WRAM1, WRAM, OAM, IO, HIRAM) and address/length
### 3. Set Breakpoints
Use breakpoints to stop execution at points of interest:
| Breakpoint Type | Tool | Use Case |
|---|---|---|
| Execution | `set_breakpoint` (type: exec) | Stop when PC reaches address |
| Read | `set_breakpoint` (type: read) | Stop when memory address is read |
| Write | `set_breakpoint` (type: write) | Stop when memory address is written |
| Range | `set_breakpoint_range` | Cover an address range (exec/read/write) |
| IRQ | `toggle_irq_breakpoints` | Break on VBlank, LCD STAT, Timer, Serial, or Joypad interrupts |
Breakpoints support 3 memory area types: `rom_ram`, `vram`, and `io`.
**Important**: Read/write breakpoints stop with PC at the instruction *after* the memory access.
Manage breakpoints with `list_breakpoints` and `remove_breakpoint`.
### 4. Step Through Code
After hitting a breakpoint or pausing:
| Action | Tool | Behavior |
|---|---|---|
| Step Into | `debug_step_into` | Execute one SM83 instruction, enter subroutines |
| Step Over | `debug_step_over` | Execute one instruction, skip CALL instructions |
| Step Out | `debug_step_out` | Run until RET/RETI returns from current subroutine |
| Step Frame | `debug_step_frame` | Execute until next VBlank; use `mode: "sync"` before dependent calls |
| Run To | `debug_run_to_cursor` | Continue until PC reaches target address |
| Continue | `debug_continue` | Resume normal execution |
After each step, call `get_cpu_status` and `get_disassembly` to see where you are.
### 5. Trace Execution
The trace logger records CPU instructions interleaved with hardware events (LCD, APU, I/O, bank switching). Start the trace logger from the emulator's debugger window, then:
1. `set_trace_log` with `enabled: true` to start recording (optionally filter event types)
2. Let the game run or step through code
3. `set_trace_log` with `enabled: false` to stop (entries are preserved)
4. `get_trace_log` to read recorded entries
Tracing is essential for understanding timing-sensitive code, interrupt handlers, and hardware interaction sequences.
---
## Rewind (Time Travel Debugging)
- `get_rewind_status` reports whether rewind is enabled, how many snapshots are available, total capacity, and how many seconds are currently buffered.
- `rewind_seek` jumps to a specific buffered snapshot. The emulator must be paused first.
- Use rewind when you need to compare two nearby execution points without managing manual save states.
Typical flow:
1. `debug_pause`
2. `get_rewind_status`
3. `rewind_seek` to an earlier snapshot
4. `get_cpu_status` and `get_disassembly` to inspect the restored point
5. `debug_continue` or keep stepping from there
---
## Hardware Inspection
### LCD Controller
- `get_lcd_registers` — all LCD registers: LCDC, STAT, SCY, SCX, LY, LYC, DMA, BGP, OBP0, OBP1, WY, WX with decoded bit fields. CGB registers: KEY1, VBK, HDMA, BCPS, BCPD, OCPS, OCPD, SVBK
- `get_lcd_status` — current LCD mode (0-3), screen enabled, LY, LYC match, CGB info
### APU (Audio)
- `get_apu_status` — all 4 audio channels: Square 1 (with sweep), Square 2, Wave, Noise: volume, frequency, envelope, duty cycle, wave RAM, panning, master volume
### SGB (Super Game Boy)
- `get_sgb_status` — SGB active flag, mask mode, multiplayer state (player count/current), last command code/data, transfer countdown/destination, border animation state, effective palettes (4×4 colors as hex), and attribute map (20×18 palette assignments)
- SGB memory areas available via `read_memory`: SGB_TILES (border tile patterns), SGB_MAP (border tilemap), SGB_BPAL (border palettes), SGB_SPAL (system palettes), SGB_ATF (attribute files), SGB_AMAP (attribute map), SGB_EPAL (effective palettes)
### Sprites (OAM)
- `list_sprites` — all 40 OAM sprites: position, tile index, attributes (priority, X/Y flip, palette, CGB bank)
- `get_sprite_image` — individual sprite rendered as PNG
### Screen Capture
- `get_screenshot` — current rendered frame as PNG
Use screenshots after stepping or continuing to see the visual impact of changes.
---
## Memory Areas
Use `list_memory_areas` to get the full list:
| Area | Description |
|---|---|
| ROM0 | ROM bank 0 (fixed, $0000-$3FFF) |
| ROM1 | Switchable ROM bank ($4000-$7FFF) |
| VRAM | Video RAM — tiles and tile maps ($8000-$9FFF) |
| RAM | Cartridge external RAM ($A000-$BFFF) |
| WRAM0 | Work RAM bank 0 ($C000-$CFFF) |
| WRAM1 | Switchable Work RAM bank 1-7 on CGB ($D000-$DFFF) |
| WRAM | Full Work RAM ($C000-$DFFF) |
| OAM | Object Attribute Memory — sprite table ($FE00-$FE9F) |
| IO | I/O registers ($FF00-$FF7F) |
| HIRAM | High RAM ($FF80-$FFFE) |
When SGB mode is active, additional areas are available:
| Area | Description |
|---|---|
| SGB_TILES | Border tile patterns — 256 tiles × 32 bytes (8192 bytes) |
| SGB_MAP | Border tilemap — 32×32 entries × 2 bytes (2048 bytes) |
| SGB_BPAL | Border palettes — 4 sub-palettes × 16 colors × 2 bytes (128 bytes) |
| SGB_SPAL | System palettes — 512 palettes × 4 colors × 2 bytes (4096 bytes, from PAL_TRN) |
| SGB_ATF | Attribute files — 45 files × 90 bytes (4050 bytes, from ATTR_TRN) |
| SGB_AMAP | Attribute map — 20×18 palette assignments (360 bytes) |
| SGB_EPAL | Effective palettes — 4 palettes × 4 colors × 2 bytes (32 bytes) |
WRAM and HIRAM are the most common locations for game variables (lives, health, score, position).
---
## Common Debugging Scenarios
### Finding an Interrupt Handler
1. `toggle_irq_breakpoints` to enable breaking on the target IRQ (VBlank, LCD STAT, Timer, Serial, Joypad)
2. `debug_continue` to run until the IRQ fires
3. `get_cpu_status` + `get_disassembly` to see the handler code
4. `get_call_stack` to see how deep you are
5. `add_symbol` to label the handler address and any subroutines it calls
The Game Boy interrupt vectors are at fixed addresses: VBlank=$0040, LCD STAT=$0048, Timer=$0050, Serial=$0058, Joypad=$0060.
### Diagnosing Graphics Corruption
1. `debug_pause` → `get_lcd_registers` — check LCDC (enable bits), SCX/SCY (scroll), WX/WY (window)
2. `get_lcd_status` — verify LCD mode, LY position
3. `read_memory` on VRAM to inspect tile data and tile maps
4. `list_sprites` — check OAM for incorrect positions, tiles, or attributes
5. Set read/write breakpoints on VRAM addresses to catch corruption source
6. `get_screenshot` to see the current visual state
### Analyzing a Subroutine
1. `set_breakpoint` at the subroutine entry point
2. `debug_continue` → when hit, `get_cpu_status`
3. Step through with `debug_step_into` / `debug_step_over`
4. After each step: check registers, read relevant memory
5. `add_symbol` for the routine and any called subroutines
6. `add_disassembler_bookmark` to mark interesting locations
### Tracking a Variable
1. `add_memory_watch` on the variable's address — watches are visible in the emulator GUI
2. Set a write breakpoint with `set_breakpoint` (type: write) on that address
3. When hit, `get_disassembly` reveals what code is modifying it
4. `get_call_stack` shows the call chain leading to the write
### Timing Analysis
1. `toggle_irq_breakpoints` to break on Timer or VBlank
2. Start the trace logger from the debugger window
3. `get_trace_log` to see the interleaved CPU + hardware events
4. `get_lcd_registers` to check timer and LCD timing configuration
5. Correlate interrupt fires with code execution in the trace
### Investigating CGB Features
For Game Boy Color games:
1. `get_cpu_status` — check if CGB double speed mode is active
2. `get_lcd_registers` — inspect CGB-specific registers (KEY1, VBK, HDMA, BCPS/BCPD, OCPS/OCPD, SVBK)
3. `read_memory` on VRAM with bank selection to inspect both VRAM banks
4. `list_sprites` — check CGB-specific attributes (VRAM bank, CGB palette)
### Debugging SGB Features
For Super Game Boy games:
1. `get_sgb_status` — check if SGB is active, inspect mask mode, command state, transfer status
2. `get_media_info` — verify `is_sgb` flag in ROM header
3. `read_memory` on SGB_TILES / SGB_MAP / SGB_BPAL to inspect border tile data, tilemap, and palettes
4. `read_memory` on SGB_SPAL to inspect system palettes loaded via PAL_TRN
5. `read_memory` on SGB_ATF to inspect attribute files loaded via ATTR_TRN
6. `get_sgb_status` → check `effective_palettes` and `attribute_map` for game colorization
7. `get_screenshot` to see the rendered SGB output (256×224 with border)
---
## Organizing Your Debug Session
- **Symbols**: Use `add_symbol` liberally to label addresses you've identified — makes disassembly readable
- **Bookmarks**: Use `add_disassembler_bookmark` for code locations and `add_memory_bookmark` for data regions
- **Watches**: Use `add_memory_watch` for variables you're tracking across steps
- **Save states**: Use `save_state` / `load_state` to snapshot and restore emulator state at interesting points
- **Screenshots**: Capture visual state with `get_screenshot` after significant changes
Pliki w paczce (2)
- SKILL.md 13 KB
- scripts/install.sh 7 KB
Wersje
W bazie nie ma innych skilli o nazwie gearboy-debugging.
Migawka bazy z 13.11.2026 · wersja paczki feae3de900fc (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100geargrafx-debugging
Debuguje i śledzi gry TurboGrafx-16, PC Engine i SuperGrafx w emulatorze Geargrafx przez serwer MCP: debugowanie CPU HuC6280, breakpointy, inspekcja sprzętu, deasemblacja i śledzenie wykonania. - 100gearsystem-debugging
Debuguje i śledzi gry Sega Master System, Game Gear i SG-1000 w emulatorze Gearsystem przez serwer MCP: debugowanie CPU Z80, breakpointy, inspekcja VDP, PSG i YM2413, deasemblacja i debugowanie z cofaniem czasu. - 100boy-scout-rule
Stosuje zasadę skauta przy zmianach istniejących plików i refaktoryzacji, aby zostawić kod w lepszym stanie niż go zastano. - 90boy-scout-rule
Pomaga zostawiać każdy edytowany plik odrobinę czystszy, bez rozszerzania zmiany poza jej cel, gdy przy okazji zadania widać drobne zaniedbania. - 100game-architecture
Pomaga projektować architekturę gry w przeglądarce: wzorce systemów, strukturę projektu i decyzje architektoniczne. - 90boy-scout
Zostawia każdy ruszany plik trochę czystszym: jedna mała, bezpieczna poprawka obok zleconej zmiany, z raportem.