fluent-cfd
/fluent-cfd
Prowadzi symulacje CFD w Ansys Fluent i PyFluent: konfigurację siatki, warunków brzegowych i turbulencji, zbieżność oraz walidację wyników.
- Autor
- cavoiie ↗
- Repozytorium
- fluent-cfd-skill ↗
- Licencja
- MIT
- Ostatnia zmiana repozytorium
- 30.09.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 7
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 30.09.2026, bez odwołań do wycofanych modeli i API.
MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.
Co robi i kiedy
Prowadzi symulacje CFD w Ansys Fluent i PyFluent: konfigurację siatki, warunków brzegowych i turbulencji, zbieżność oraz walidację wyników.
Oryginalny opis (EN)
Guide Ansys Fluent and PyFluent CFD simulation workflows with MCP tool-use discipline. Use when Codex works on Fluent, PyFluent, Fluent TUI, CFD or fluid simulation setup, case/data files, mesh quality, boundary conditions, turbulence models, residual convergence, UDFs, post-processing, solver diagnostics, or validation of Ansys Fluent results.
Jak działa
- Operating Rules
- Workflow
- Reference Loading
- MCP Tool Discipline
Podgląd SKILL.md
--- name: fluent-cfd description: Guide Ansys Fluent and PyFluent CFD simulation workflows with MCP tool-use discipline. Use when Codex works on Fluent, PyFluent, Fluent TUI, CFD or fluid simulation setup, case/data files, mesh quality, boundary conditions, turbulence models, residual convergence, UDFs, post-processing, solver diagnostics, or validation of Ansys Fluent results. --- # Fluent CFD Use this skill as the workflow and judgment layer for Ansys Fluent work. Keep Fluent documentation as the fact source, use the local `pyfluent` MCP server as the execution layer, and use this skill to decide the order of operations, checks, and validation criteria. ## Operating Rules - Define the physics before touching the solver: objective quantity, geometry, units, fluid, regime, steady/transient behavior, compressibility, heat transfer, multiphase, rotating zones, and expected validation evidence. - Do not treat residual decrease alone as convergence. Require monitor stabilization and conservation checks for the quantities that matter. - Do not skip mesh quality, units, boundary-zone naming, boundary-condition consistency, and wall-resolution checks. - Do not change turbulence models without a physical reason or a stated validation purpose. - Prefer safe MCP tools and explicit Fluent TUI commands. Use `execute_python` only when `PYFLUENT_MCP_ENABLE_PYTHON=1` and the workflow is trusted. - Before starting Fluent or consuming a license, state that the action will launch Fluent and may occupy a license/session. - End live Fluent sessions with `exit_fluent` when the task is complete unless the user asks to keep the session open. ## Workflow 1. Frame the case: identify objective metrics, physics, known inputs, missing data, expected outputs, and acceptance criteria. 2. Choose solver and models: decide pressure-based vs density-based, steady vs transient, energy, multiphase, turbulence, wall treatment, and reference values. 3. Check the mesh and setup basis: units, cell/face zones, boundary names, quality metrics, non-orthogonality/skewness, and y+ target. 4. Set or review materials, boundary conditions, operating/reference conditions, numerics, initialization, and monitors. 5. Run a smoke test first: a short iteration/time-step run to catch setup errors before a full solve. 6. Iterate or advance time while monitoring residuals, integral balances, and objective quantities. 7. Save case/data and report validation status, remaining risks, and next checks. ## Reference Loading Load only the reference files needed for the current task: - `references/workflow.md`: complete Fluent workflow and task routing. - `references/solver-selection.md`: model and solver selection rules. - `references/boundary-conditions.md`: inlet, outlet, wall, symmetry, periodic, and rotating-zone boundary checks. - `references/turbulence-and-wall-treatment.md`: turbulence model, wall treatment, y+, and mesh implications. - `references/numerics-and-convergence.md`: discretization, initialization, monitors, residuals, and convergence. - `references/pyfluent-mcp.md`: local `pyfluent` MCP tools, call order, safety limits, and failure handling. - `references/validation-checklist.md`: conservation, mesh independence, physical plausibility, and post-processing checks. - `references/error-recovery.md`: divergence, reversed flow, negative volume, CFL, residual stalls, and launch/license failures. ## MCP Tool Discipline When a task requires real Fluent execution through the local MCP server: 1. Call `server_info` first to confirm PyFluent, Ansys roots, and whether Python execution is enabled. 2. Call `launch_fluent` only after stating that Fluent will start and may consume a license. 3. Use `read_case` for existing `.cas`, `.cas.h5`, or equivalent case files. 4. Use `run_tui` for explicit, auditable Fluent TUI commands. 5. Use `iterate` for a defined iteration count; prefer a short smoke run before long runs. 6. Use `session_status` after suspicious behavior or long operations. 7. Use `write_case_data` before closing if the state should be preserved. 8. Use `exit_fluent` at the end of the workflow unless the user explicitly wants the session left open. If a tool returns an error, stop the automation sequence, summarize the failure, read `references/error-recovery.md` if relevant, and propose the smallest safe recovery.
Pliki w paczce (7)
- .gitignore 1 KB
- LICENSE 1 KB
- PROMPTS.md 4 KB
- PROMPTS.zh-CN.md 3 KB
- README.md 3 KB
- README.zh-CN.md 3 KB
- SKILL.md 4 KB
Wersje
W bazie nie ma innych skilli o nazwie fluent-cfd.
Migawka bazy z 13.11.2026 · wersja paczki e27500203da9 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 90CFD Fluent Pipeline
Prowadzi audytowalną symulację CFD w Ansys Fluent i PyFluent: siatkę, warunki brzegowe, model turbulencji, zbieżność i walidację wyników. - 90run-fluent-autoclave
Prowadzi, diagnozuje i waliduje symulacje CFD w ANSYS Fluent dla autoklawów z konwekcją wymuszoną, geometrią STEP i kontrolą bilansu masy. - 95ansys-fluent-mcp
Steruje sesją solvera ANSYS Fluent przez serwer MCP: wczytuje przypadek i siatkę, zmienia ustawienia, uruchamia iteracje i odczytuje wyniki. - 100fluent-tui-knowledge
Sprawdza polecenia i gotowe zestawy interfejsu tekstowego Ansys Fluent, podając źródło każdej informacji. - 90fluent-case-builder
Kieruje zadania Ansys Fluent do właściwego wyspecjalizowanego skilla i zapisuje na dysku, na jakim etapie jest przypadek, także po wznowieniu rozmowy. - 100openfoam
Wspiera symulacje CFD w OpenFOAM: dobór solvera, ustawienia słowników, siatki, modele turbulencji i weryfikację przepływów oraz wymiany ciepła.