echo-flow
/echo-flow
Prowadzi cały cykl SDLC od jednego celu, sam przechodzi czyste etapy i zatrzymuje się tylko przy bramkach wymagających decyzji.
- Autor
- ybshankar010 ↗
- Repozytorium
- echo ↗
- Licencja
- Apache-2.0
- Ostatnia zmiana repozytorium
- 01.11.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 1
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 0
Brak sygnałów. Repozytorium zmienione 01.11.2026, bez odwołań do wycofanych modeli i API.
Apache-2.0, otwarta: można używać i zmieniać, z zachowaniem licencji i informacji o zmianach.
Co robi i kiedy
Prowadzi cały cykl SDLC od jednego celu, sam przechodzi czyste etapy i zatrzymuje się tylko przy bramkach wymagających decyzji.
Oryginalny opis (EN)
Drive the whole echo SDLC loop from a single goal, auto-advancing clean stages and stopping only at the gates that matter. Use when the user wants to run or resume the full loop for a ticket.
Jak działa
- Arguments
- Steps
- Under Codex
Podgląd SKILL.md
---
name: echo-flow
description: Drive the whole echo SDLC loop from a single goal, auto-advancing clean stages and stopping only at the gates that matter. Use when the user wants to run or resume the full loop for a ticket.
---
# echo flow (Codex)
Codex port of echo's `/echo:flow` command. It drives the same loop through the stdlib
`bin/echo-*` CLIs (unchanged).
## Arguments
Skills have no structured arguments. Read the ticket id (`[A-Z]+-[0-9]+`) and any goal text
from what the user typed; never fabricate a ticket.
## Steps
This reduces the loop to a few touchpoints: run the mechanical work, auto-approve any stage
whose automated check comes back clean, and stop only where a human decision matters. It is
re-runnable: read `echo-stage status` and continue from wherever the item is.
### Setup
1. Extract a Jira ticket id (`[A-Z]+-[0-9]+`) from what the user typed. If none is present,
STOP and ask for it. Never fabricate one (organization policy).
2. Read `.echo/config.json`. The `autonomy` level decides which gates to stop at
(`gated` -> every stage; `checkpoint` (default) -> `plan` and `ship`; `auto` -> `ship`
and any failure). Do not decide this yourself; ask the bin
(`python3 bin/echo-stage gate-mode --stage <stage>`) per stage.
3. If research was requested, run the echo-research flow first so the intent can cite it.
4. If there is no active item yet (or it is a different ticket), run the echo-intent flow to
initialize and write `.echo/artifacts/<TICKET>/intent.md`.
### Drive loop
Repeat until the item reaches `done` or you hit a stop:
1. Run `python3 bin/echo-stage status` to see the current stage and gate.
2. If the current stage's artifact/action is not done yet, produce it with the matching
flow: spec -> echo-spec; plan -> echo-plan (with its critic maker-checker loop);
build -> echo-build (the builder + reviewer maker-checker loop); test -> echo-verify;
ship -> handled at the stop below.
3. Run the stage's automated check and read its result (intent/spec/plan use the critic,
build uses the reviewer, test uses the echo-verify exit code).
4. If the check FAILED (important/blocking findings, or verify non-zero): STOP. Summarize
what failed, do NOT approve, and say how to fix or override. A failed check always stops,
whatever the autonomy level.
5. Otherwise ask the bin whether to pause: `python3 bin/echo-stage gate-mode --stage <current-stage>`.
- `stop` -> summarize the artifact and the clean check result and STOP. Tell the user to
review and approve, and that re-running the flow resumes from here. At `ship`, once
approved, run the echo-ship flow, then run the mandatory post-ship watch if
`.echo/verify/<TICKET>-ci.md` does not exist yet
(`python3 bin/echo-watch run --ticket <TICKET>`).
- `auto` -> approve and advance without the user:
`python3 bin/echo-stage approve` then `python3 bin/echo-stage next`, then continue.
Under Claude Code this command also posts per-stage Jira progress comments through the
Atlassian MCP tools. That is Claude-only; skip it under Codex.
### On every stop
State plainly: the ticket, the stage you stopped at, why (a gate or a failure), what to
review, and how to resume. Do not auto-approve a stop gate, and do not weaken any check to
keep moving.
## Under Codex
Gates are advisory and orchestration is prose-driven. Where the Claude command spawns the
`critic`, `builder`, or `reviewer` via the Task tool, delegate in prose to the matching role
under `.codex/agents/`. See `.agents/skills/README.md` for the Known limitations before
relying on this.
Wersje
W bazie nie ma innych skilli o nazwie echo-flow.
Migawka bazy z 13.11.2026 · wersja paczki b02f8b2f5ce5 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100echo-next
Przechodzi do następnego etapu SDLC i generuje jego artefakt, o ile bieżąca bramka jest zatwierdzona. - 100echo
Wprowadza zasady i wzorce pracy z frameworkiem Echo w Go: middleware, routing, obsługę kontekstu i wytyczne dla REST API. - 100agentic-sdlc-loop
Prowadzi zgłoszenie od pomysłu przez PRD, plan i kod aż do pull requestu, z zatrzymaniem na każdej bramce dla człowieka. - 100ticket-flow
Przeprowadza cały ticket od zrozumienia po testy i dokumentację, zatrzymując się tylko na bramkach dla człowieka. - 100sdlc
Uruchamia autonomiczny pipeline SDLC od specyfikacji po dostawę, przechodząc przez bramki jakości: review, build, testy i bezpieczeństwo. - 100sdlc
Uruchamia autonomiczny pipeline SDLC od specyfikacji po dostawę, przechodząc przez bramki jakości: review, build, testy i bezpieczeństwo.