Przejdź do treści
Biblioteka skilli
Programowanie · Testowanie

bounce-a-plugin

/bounce-a-plugin

Renderuje dźwięk z wtyczki VST3 bez DAW, porównuje silnik z inną wtyczką lub emulatorem i dopasowuje prawo do wtyczki.

Repozytorium
claude-packs ↗
Licencja
MIT
Ostatnia zmiana repozytorium
11.11.2026

Ocena i bezpieczeństwo

96/ 100Klasa: dobry
Format25 / 25
Frontmatter z nazwą i opisem, poprawna nazwa, opis do 1024 znaków, nazwa zgodna z folderem.
Odkrywalność25 / 25
Opis mówi, kiedy użyć skilla, ma sensowną długość i jest w 3. osobie.
Treść31 / 35
Co najmniej 150 słów i do 500 linii, nagłówki, listy kroków, przykłady albo kod.
Higiena15 / 15
Bez zaślepek typu TODO, bez ścieżek Windows, z licencją.
Ryzykobrak sygnałów w skanie
Pliki w paczce
1
Skrypty
0
Komentarze HTML
0
Adresy URL w SKILL.md
0
Przestarzałość

Brak sygnałów. Repozytorium zmienione 11.11.2026, bez odwołań do wycofanych modeli i API.

Licencja

MIT, otwarta: można używać i zmieniać, z zachowaniem informacji o autorze.

Co robi i kiedy

Renderuje dźwięk z wtyczki VST3 bez DAW, porównuje silnik z inną wtyczką lub emulatorem i dopasowuje prawo do wtyczki.

Oryginalny opis (EN)

Use when audio has to be rendered from a VST3 with no DAW, when comparing an engine with another plugin or an emulator, when fitting a law against a plugin, or when a plugin will not load in a JUCE host or plays silence.

Jak działa

SKILL.md bez nagłówków drugiego poziomu · 37 linii, 626 słów

Podgląd SKILL.md
---
name: bounce-a-plugin
description: Use when audio has to be rendered from a VST3 with no DAW, when comparing an engine with another plugin or an emulator, when fitting a law against a plugin, or when a plugin will not load in a JUCE host or plays silence.
---

# Bounce a plugin (one job: a known input through a plugin, and the audio out, repeatable)

`.claude/tools/vst3host/` is an offline VST3 renderer: no DAW, no audio device, no window, faster than real time. It does not link JUCE, on purpose: a JUCE host cannot load every JUCE plugin.

```
bash .claude/tools/vst3host/build.sh            # once, after the project's first configure; macOS and Linux
R=out/vst3host/render
$R --vst3 <plugin> --list                       # every parameter, with its id
$R --vst3 <plugin> --out a.wav --note 60 --vel 100 --hold 1.5 --tail 0.6
$R --vst3 <plugin> --param 12=0.75 --sweep 38:9 --dir out/   # one note per value of 38, 12 frozen
$R --vst3 <plugin> --program 5 --bank 0:1 --out a.wav        # the same factory patch a machine was recorded on
$R --vst3 <plugin> --sysex patch.syx --dump-params           # send a patch, and read whether it was taken
```

The WAV is 32-bit float, so a plugin that peaks over 1.0 is measured, never clipped. For a Roland machine, `--dt1-head "41 10 00 06" --dt1-base 1004000` sends DT1: `--dt1 OFF=VAL` pins a value, `--sweep-dt1 OFF:STEPS[:MAX]` and a repeated `--axis` sweep, `--probe LO-HI[:V1,V2]` finds which offset is a control, and `--map LO-HI[:VAL]` asks the plugin which parameter an offset is.

<constraints>
Always do:
1. Run `--list` first. `--param` and `--sweep` take the id, never the row number. A wrong id is ignored, and the sweep renders the same sound with no complaint.
2. Prove the bounce before you trust it. Render twice: same bytes means the plugin is repeatable, and you can compare exactly. If it is not (a free-running oscillator, modelled drift), compare averages of several bounces, and say so.
3. Prove a control reaches the audio: sweep it, and measure that the audio moves. Two renders that match byte for byte mean the control did nothing.
4. Render one note per value. Move a control between notes, never under one.
5. Give a firmware emulator its boot: `--boot 12`. The emulated processor needs real samples before it answers a note, and a short boot reads as a silent plugin.
6. When parameters do nothing, try sysex. A firmware emulator may ignore host automation and answer only the machine's own messages. The renderer sets both the controller and the processor's queue, and if the audio is still byte-identical, sysex is the way in.
7. Ask whether a dump was taken: `--dump-params` before and after. A rejected dump and an accepted one that sounds alike cannot be told apart in a WAV. Identical output means the patches never arrived, whatever the spectra look like.
8. Fix everything else: patch, note, velocity, sample rate, effects off. To fit one control, move only that control. A factory-patch recording cannot fit a law, since a performance has its chorus on.
9. To compare two engines, render both with the same patch and the same notes, and name in the report what the other engine is. An emulation is a reference, not the machine: tag it as what it is, and record where it disagrees with the schematic rather than choosing quietly.

Never do:
- Open an audio device, or route through a loopback, to capture a plugin. On macOS a permission denial returns silence, not an error.
- Load a plugin in a JUCE host to measure it and trust a crash as the plugin's fault: an allocator clash across the boundary aborts inside the plugin's own loader.
- Read one output bus as all of them. The renderer gives every bus a buffer and keeps bus 0: a plugin with several may send a part elsewhere.
- Commit a render: it is a build output, and a plugin's sound may be someone else's. Keep the numbers.
- Run a cracked or unlicensed plugin. Use the maker's trial.
</constraints>

Wersje

W bazie nie ma innych skilli o nazwie bounce-a-plugin.

Migawka bazy z 13.11.2026 · wersja paczki c4734f73388f (skrót SHA-256 całej paczki)

Pobrania w ostatnich 30 dniach: 0 · ranking

Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.

Podobne skille

  • 100daw-init
    Ustawia projekt w DAW: pyta, z jakiego formatu specyfikacji korzysta, i zapisuje plik .daw/config.yml zgodny ze schematem.
  • 100audio-headless-debug
    Odtwarza i debuguje błędy wtyczki audio widoczne tylko w DAW (przerwania, glitche, błędy parametrów) offline przez bezgłowe sceny i próbnik hosta AudioUnit.
  • 100daw-help
    Wprowadza w działanie narzędzia DAW: wyjaśnia, czym jest, jak go zainstalować i jakie ma polecenia.
  • 100plugin-development
    Tworzy, uruchamia i testuje wtyczki NetAlertX oraz pomaga rozwijać ich funkcjonalność.
  • 100plugin-creator
    Prowadzi przez tworzenie i instalację wtyczki w Pythonie, która dodaje nowe narzędzie do agenta 星瑶.
  • 90juce-realtime-audit
    Audytuje bezpieczeństwo czasu rzeczywistego w kodzie audio JUCE po trzaskach, zanikach lub skokach CPU, przed scaleniem zmian.

Uwagi i zgłoszenia

Wiadomość trafi do Bartosza Sokolińskiego. Adres e-mail jest potrzebny tylko do odpowiedzi. Szczegóły w polityce prywatności.