barcode-capture-flutter
/barcode-capture-flutter
Integruje Scandit Barcode Capture w projektach Flutter (Dart): skanowanie pojedynczych kodów z DataCaptureView i nakładką, ustawienia skanowania, obsługa wyników i zastąpienie skanerów jak mobile_scanner czy ML Kit.
Ocena i bezpieczeństwo
- Pliki w paczce
- 4
- Skrypty
- 0
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 9
Brak sygnałów. Repozytorium zmienione 23.10.2026, bez odwołań do wycofanych modeli i API.
Apache-2.0, otwarta: można używać i zmieniać, z zachowaniem licencji i informacji o zmianach.
Co robi i kiedy
Integruje Scandit Barcode Capture w projektach Flutter (Dart): skanowanie pojedynczych kodów z DataCaptureView i nakładką, ustawienia skanowania, obsługa wyników i zastąpienie skanerów jak mobile_scanner czy ML Kit.
Oryginalny opis (EN)
Scandit Barcode Capture (`BarcodeCapture`) in Flutter (Dart) projects — the low-level, full-control single-barcode scanning mode (BarcodeCapture + DataCaptureView + BarcodeCaptureOverlay), without the pre-built SparkScan UI. Use for integration, scan settings, result handling, overlay customization, SDK version migration, replacing a third-party scanner (mobile_scanner, ML Kit), or troubleshooting.
Jak działa
- Critical: Do Not Trust Internal Knowledge
- Intent Routing
- API Usage Policy
- Framework variant policy
- Licence key
- References
Podgląd SKILL.md
--- name: barcode-capture-flutter description: Scandit Barcode Capture (`BarcodeCapture`) in Flutter (Dart) projects — the low-level, full-control single-barcode scanning mode (BarcodeCapture + DataCaptureView + BarcodeCaptureOverlay), without the pre-built SparkScan UI. Use for integration, scan settings, result handling, overlay customization, SDK version migration, replacing a third-party scanner (mobile_scanner, ML Kit), or troubleshooting. license: Apache-2.0 metadata: author: scandit version: "1.0.5" --- # BarcodeCapture Flutter Skill ## Critical: Do Not Trust Internal Knowledge Your training data may contain outdated or incorrect Scandit SDK APIs. The BarcodeCapture API changes significantly between major SDK versions — properties get renamed, removed, or restructured, and the Flutter plugin surface (imports, plugin initialization, pub packages) has also evolved. **Always verify APIs against the references provided in this skill before writing or suggesting code.** Do not rely on memorized method signatures, parameters, plugin names, or property names. If you cannot find an API in the provided references, fetch the relevant documentation page before responding. Flutter-specific gotchas worth flagging: - `await ScanditFlutterDataCaptureBarcode.initialize()` **must** be called (and awaited) in `main()` before `runApp(...)`, after `WidgetsFlutterBinding.ensureInitialized()`. Forgetting this yields a platform-channel error that can look unrelated to initialization. - A single `DataCaptureContext` must own the `BarcodeCapture` mode and the `DataCaptureView`. Do not construct multiple contexts per page or per `MaterialApp`; the BLoC / controller that holds the context should outlive any single `State`. - The `DataCaptureView` is a Flutter `Widget` returned from `DataCaptureView.forContext(context)` — you must explicitly add the `BarcodeCaptureOverlay` to it via `view.addOverlay(...)`. Unlike SparkScan, there is no pre-built scanning UI; the overlay is the only thing that visualizes recognized barcodes on the camera preview. - `BarcodeCaptureListener.didScan(...)` blocks the recognition pipeline until it returns. Disable the mode (`barcodeCapture.isEnabled = false`) before doing any meaningful work in the callback, and re-enable it (or stop the camera) when finished — otherwise duplicate / unwanted scan events will fire. - The `getFrameData` parameter on the Flutter listener is a `Future<FrameData?> Function()` — frame data is fetched lazily. Only invoke it if you actually need the frame data, since it crosses the platform channel. - `flutter pub get` must be run after every package version change. On iOS, the Podfile resolves transitively — no manual pod install needed unless the user has a custom setup. - Camera permission is required on both iOS (`NSCameraUsageDescription` in `ios/Runner/Info.plist`) and Android (runtime request via `permission_handler` — the plugin declares the manifest permission automatically). - Hot-reload does not re-run `main()`, so the camera lifecycle (and the `ScanditFlutterDataCaptureBarcode.initialize()` call) survive a hot reload. A full restart is needed to re-trigger plugin init. Drive `camera.switchToDesiredState(...)` from `WidgetsBindingObserver.didChangeAppLifecycleState` so the camera turns off in `paused` and back on in `resumed`. ## Intent Routing Based on the user's request, load the appropriate reference file before responding: - **Integrating BarcodeCapture from scratch** (e.g. "add BarcodeCapture to my app", "set up barcode scanning", "how do I use BarcodeCapture in Flutter", "how do I handle the camera in BarcodeCapture") → read [references/integration.md](references/integration.md) and follow the instructions there. - **Migrating or upgrading an existing BarcodeCapture integration** (e.g. "upgrade from v6 to v7", "migrate my BarcodeCapture", "bump the Scandit packages to v8", "what changed between SDK versions") → read [references/migration.md](references/migration.md) and follow the instructions there. - **Replacing a third-party scanner with BarcodeCapture** (e.g. "migrate from mobile_scanner", "replace google_mlkit_barcode_scanning with Scandit", "swap our existing barcode plugin for Scandit") → read [references/third-party-migration.md](references/third-party-migration.md) and follow the instructions there. ## API Usage Policy Only use APIs that are explicitly documented in the Scandit references below. Do not invent or guess method signatures, parameters, property names, or imports. If unsure whether an API exists or how it is called — or if an analyzer / runtime error occurs — fetch the relevant reference page before responding. Do not tell the user to check the docs themselves. After answering, always include the relevant link so the user can explore further. After writing or migrating code, run `dart analyze` (or `flutter analyze`) and fix every error and warning before answering. **Never construct or guess documentation URLs.** When you need a specific class or property's API page: 1. First check whether the page you already fetched (e.g. the Advanced Configurations page) contains a direct hyperlink to it — topic pages link directly to relevant API symbols. Always request links alongside content in your fetch prompt. 2. If no direct link was found, fetch the API index (see **Full API reference** in the table below), extract the actual link from it, and follow that. URL structures vary across SDK versions and package paths (e.g. `api/ui/` subdirectory) and guessing will lead to 404s. ## Framework variant policy Flutter apps use many state-management patterns (StatefulWidget, BLoC, Provider, Riverpod). Examples in this skill use the **BLoC pattern** because it matches the official Scandit Flutter samples, keeps the scan pipeline cleanly separated from the widget tree, and composes well with the camera lifecycle. If the target project already uses a different pattern (Provider, Riverpod, GetX, plain StatefulWidget), keep the BarcodeCapture wiring conceptually the same (one owner holds `DataCaptureContext`, `BarcodeCapture`, the `Camera`, and exposes scan events to the UI) and port the code snippets into the project's existing convention — do not rewrite the project's state management. ## Licence key Scanning needs a Scandit licence key. For this skill the licence product is `native` and the licence platforms are `ios` and `android`. Work through these in order — never block the user on MCP: 1. **The Scandit MCP server is connected** — call `ensure_scanner_setup` with product `native` and platforms `ios` and `android`, `app_identifier` (the app's bundle or application id; for web, its production domain, never `localhost`) and `env_var` `SCANDIT_LICENSE_KEY`. Do not run the command it returns. Then call `get_license_key` with the key's id, from that result or from `list_license_keys`; if `list_license_keys` shows the key is not a trial, ask the user before fetching it. Show at most a masked preview in chat; never print a full key. 2. **It is not connected** — tell the user once that they can connect the remote Scandit MCP server, `https://ssl.scandit.com/mcp`, in their MCP client, then continue from step 1. Do not edit MCP client configuration yourself. Authentication is browser-based, so it is **not supported headless or in CI**. The server provisions **trial** keys only; it never creates, revokes, or modifies production licences. 3. **The user declines, or has no MCP client** — they generate a key themselves at <https://ssl.scandit.com> (no account yet: <https://ssl.scandit.com/dashboard/sign-up?p=test>) and paste it in. **Then put the key into the code**: write it into the licence-key call in place of the placeholder — the key `get_license_key` returned, or the one the user pastes or gives you — still showing only a masked preview in chat. Do not search the project, its files or the environment for a key. ## References Direct users to the right resource based on their question: | Topic | Resource | |---|---| | Flutter integration | [Get Started](https://docs.scandit.com/sdks/flutter/barcode-capture/get-started/) · [Samples](https://github.com/Scandit/datacapture-flutter-samples) | | Advanced topics (custom feedback, viewfinders, location selection, scan intention, composite codes) | [Advanced Configurations](https://docs.scandit.com/sdks/flutter/barcode-capture/advanced/) | | Migration between major SDK versions | [6 → 7](https://docs.scandit.com/sdks/flutter/migrate-6-to-7/) · [7 → 8](https://docs.scandit.com/sdks/flutter/migrate-7-to-8/) | | Full API reference | [BarcodeCapture API](https://docs.scandit.com/data-capture-sdk/flutter/barcode-capture/api.html) |
Pliki w paczce (4)
- SKILL.md 9 KB
- references/integration.md 21 KB
- references/migration.md 9 KB
- references/third-party-migration.md 17 KB
Wersje
W bazie nie ma innych skilli o nazwie barcode-capture-flutter.
Migawka bazy z 13.11.2026 · wersja paczki d4833c949f2f (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100barcode-capture-ios
Integruje Scandit Barcode Capture w natywnych projektach iOS (Swift): skanowanie pojedynczych kodów z DataCaptureView i nakładką, ustawienia skanowania, obsługa wyników i migracja SDK v6 do v8. - 100barcode-capture-android
Integruje Scandit Barcode Capture w natywnych projektach Android (Kotlin, Java): niskopoziomowe skanowanie pojedynczych kodów z DataCaptureView i nakładką, ustawienia symbologii, obsługa wyników i migracja SDK v6 do v8.