bambu-printer
/bambu-printer
Monitoruje na żywo, tylko do odczytu, stan drukarki Bambu Lab w domowej sieci: postęp, temperatury, błędy i filamenty w AMS.
- Autor
- superalex051 ↗
- Repozytorium
- bambu-studio-claude-skills ↗
- Licencja
- AGPL-3.0
- Ostatnia zmiana repozytorium
- 12.11.2026
Ocena i bezpieczeństwo
- Pliki w paczce
- 12
- Skrypty
- 7
- Komentarze HTML
- 0
- Adresy URL w SKILL.md
- 1
Brak sygnałów. Repozytorium zmienione 12.11.2026, bez odwołań do wycofanych modeli i API.
AGPL-3.0, copyleft: przeróbki udostępniane innym muszą mieć tę samą licencję.
- 7 skryptów w paczce. Przejrzyj je przed instalacją, bo Claude może je uruchomić.
Skrypty: scripts/discover_printer.py, scripts/printer_extras.py, scripts/status.sh, tests/conftest.py, tests/test_discover.py, tests/test_extras.py, tests/test_skill_rules.py
Co robi i kiedy
Monitoruje na żywo, tylko do odczytu, stan drukarki Bambu Lab w domowej sieci: postęp, temperatury, błędy i filamenty w AMS.
Wyzwalacze z opisu
Oryginalny opis (EN)
Read-only live status of the user's Bambu Lab printer on their home network (built and tested on an H2S with an AMS 2 Pro): whether it's printing, idle, paused or done, progress and time left, current layer, the last job's name once it's finished, nozzle/bed/chamber temperatures, errors, which filaments are in the AMS slots (and which are empty), and the AMS humidity, temperature and drying state. It can also watch a print in the background and report when it finishes or fails. Use this whenever the user asks "is my print done", "how long is left", "what's in the AMS", "how humid is the AMS /
Jak działa
- Commands
- Watching a print
- What this skill never does, and why
- When it doesn't work
Podgląd SKILL.md
---
name: bambu-printer
description: Read-only live status of the user's Bambu Lab printer on their home network (built and tested on an H2S with an AMS 2 Pro): whether it's printing, idle, paused or done, progress and time left, current layer, the last job's name once it's finished, nozzle/bed/chamber temperatures, errors, which filaments are in the AMS slots (and which are empty), and the AMS humidity, temperature and drying state. It can also watch a print in the background and report when it finishes or fails. Use this whenever the user asks "is my print done", "how long is left", "what's in the AMS", "how humid is the AMS / do I need to dry", "watch my print" or "did it fail", or before slicing a multicolor job (to read which colors are actually loaded), even if they don't say "printer status".
---
# Bambu printer status (read-only)
Status comes over the printer's local MQTT connection, through the
[bambu-studio-ai](https://github.com/heyixuan2/bambu-studio-ai) tool. The printer stays in its normal (cloud) mode, so
Bambu Handy and cloud printing keep working. First-time setup is in [references/setup.md](references/setup.md).
`$BSAI` below is the bambu-studio-ai folder (e.g. `~/.local/src/bambu-studio-ai`), and its Python environment must
have its requirements installed.
## Commands
```bash
<skill folder>/scripts/status.sh # status + AMS slots + humidity/temperature/drying/empty slots + last job when idle
"$BSAI/.venv/bin/python" "$BSAI/scripts/bambu.py" ams --json # slots as JSON
```
Answer what the user asked first (e.g. "about 1 h 40 min left, layer 212 of 480"), then anything that needs attention:
an error code, AMS humidity high enough to dry, a slot running low.
## Watching a print
Run the monitor in the background and relay each line that starts with `📢 NOTIFY` to the user as it arrives:
```bash
"$BSAI/.venv/bin/python" "$BSAI/scripts/monitor.py" --wait-start 30 --interval 300
```
- `--wait-start 30` waits up to 30 minutes for a print to begin.
- `--interval 300` checks every 5 minutes.
Don't ask the printer more often than every few minutes: each check requests a full report.
## What this skill never does, and why
- **No printer control.** It can't start, pause, stop or change a print, and you shouldn't offer to. Bambu's firmware
only accepts control from third-party software in LAN Only + Developer Mode, which turns off Bambu Handy, remote
printing and print history. Prints start in Bambu Studio, and pausing or stopping happens on the touchscreen or in
Bambu Handy. Don't suggest switching modes unless the user brings it up.
- **No access code in chat.** The LAN access code is a password. The user enters it on their own machine
([references/setup.md](references/setup.md)). Never ask them to type it into the conversation, and never print it.
- **Never touch the stored code.**
- Don't run `configure.py show`. Its "mask" prints the last 4 characters, which is half of an 8-character code, even
though bambu.py's own error message suggests running it.
- Don't read `~/.bambu-studio-ai/.secrets.json`.
- Don't read Bambu Studio's `BambuStudio.conf`, which stores LAN access codes in plain text.
- To check whether setup is complete, run `scripts/printer_extras.py`. It prints only the *names* of any missing
fields.
## When it doesn't work
| Symptom | Likely cause and fix |
|---|---|
| "Can't reach the printer" or a timeout | The router gave the printer a new IP. Run `scripts/discover_printer.py` to find it, then `configure.py set printer_ip <ip>`. |
| "Not authorized" | The access code changed (it resets if refreshed on the touchscreen). The user re-enters it: see [references/setup.md](references/setup.md). |
| Connects, but no report arrives | Wrong serial. `discover_printer.py` prints the right one. |
| Missing access code | First-time setup isn't finished: see [references/setup.md](references/setup.md). |
Pliki w paczce (12)
- .gitignore 1 KB
- SKILL.md 4 KB
- references/setup.md 2 KB
- scripts/discover_printer.py 3 KB
- scripts/printer_extras.py 5 KB
- scripts/status.sh 1 KB
- tests/conftest.py 1 KB
- tests/test_discover.py 1 KB
- tests/test_extras.py 3 KB
- tests/test_skill_rules.py 1 KB
- tests/fixtures/h2s_report.json 1 KB
- tests/fixtures/ssdp_notify.txt 1 KB
Wersje
| Repozytorium | Wynik | Licencja |
|---|---|---|
| Ta strona · superalex051/bambu-studio-claude-skills | 100 | AGPL-3.0 |
| tyty-the-eyety/bambu-printer-skill | 85 | MIT |
Migawka bazy z 13.11.2026 · wersja paczki 668046cd5276 (skrót SHA-256 całej paczki)
Pobrania w ostatnich 30 dniach: 0 · ranking
Zgłoś problem z tym skillem: szkodliwa treść, błędny opis albo prośba autora o usunięcie.
Podobne skille
- 100bambu-studio-ai
Prowadzi druk 3D na drukarkach Bambu Lab: znajduje modele online, generuje je przez AI lub jako parametryczny CAD, naprawia pod kątem drukowalności, konwertuje tekstury do AMS i otwiera w Bambu Studio. - 95x2d-print
Przygotowuje gotowy do druku projekt Bambu Studio dla drukarki X2D z częściami STL i kolorami AMS, z instrukcją krok po kroku. - 95bambu-labs
Wysyła wydruki na drukarki Bambu Lab przez Bambu Connect lub Bambu Studio, otwierając plik .gcode.3mf w aplikacji, w której użytkownik wybiera drukarkę. - 100bambu-studio-settings
Podaje dokładne informacje o ustawieniach slicera Bambu Studio: gdzie są, co robią, zakresy, wartości domyślne i typowe problemy. - 1003d-print-doctor
Diagnozuje wydruki 3D i dostraja ustawienia drukarki Bambu Lab z OrcaSlicerem na macOS. - 100bambu-studio-model-builder
Buduje parametryczne modele do druku 3D jako pliki .3mf dla Bambu Studio i wczytuje je ponownie, zachowując ustawienia wydruku.