Skip to content
Skills Library
Other · Analysis

tolerance-stackup

/tolerance-stackup

Runs 1-D tolerance stack-ups (worst-case, RSS, Monte Carlo) on a dimension chain, ranks contributors, and estimates reject rate against a gap spec. Use when the user asks about tolerance stack-up, gap/interference analysis, clearance between parts, or how to allocate tolerances.

Licence
MIT
Last repository change
03.11.2026

Assessment and security

100/ 100Class: good
Format25 / 25
Frontmatter with name and description, valid name, description up to 1,024 characters, name matching the folder.
Discoverability25 / 25
Description explains when to use the skill, has a reasonable length and uses third person.
Content35 / 35
At least 150 words and at most 500 lines, headings, step lists, examples or code.
Hygiene15 / 15
No placeholders such as TODO, no Windows paths, with a licence.
Riskno signals detected in the scan
Files in this package
3
Scripts
1
HTML comments
0
URLs in SKILL.md
0
Deprecation

No signals detected. Repository changed on 03.11.2026, without references to retired models or APIs.

Licence

MIT, open: use and modify while retaining author attribution.

What to check before installing
  • 1 scripts in this package. Review them before installing, as Claude may execute them.

Scripts: scripts/stackup.py

What it does and when to use it

Runs 1-D tolerance stack-ups (worst-case, RSS, Monte Carlo) on a dimension chain, ranks contributors, and estimates reject rate against a gap spec. Use when the user asks about tolerance stack-up, gap/interference analysis, clearance between parts, or how to allocate tolerances.

Original author description

Runs 1-D tolerance stack-ups (worst-case, RSS, Monte Carlo) on a dimension chain, ranks contributors, and estimates reject rate against a gap spec. Use when the user asks about tolerance stack-up, gap/interference analysis, clearance between parts, or how to allocate tolerances.

How it works

  1. Workflow
  2. Output format
  3. Limits
Original SKILL.md headings · 31 lines, 281 words
SKILL.md preview
---
name: tolerance-stackup
description: Runs 1-D tolerance stack-ups (worst-case, RSS, Monte Carlo) on a dimension chain, ranks contributors, and estimates reject rate against a gap spec. Use when the user asks about tolerance stack-up, gap/interference analysis, clearance between parts, or how to allocate tolerances.
---

# Tolerance Stack-up

## Workflow

1. **Define the gap.** Name the gap being studied and its spec (LSL / USL). Draw the loop in text:
   `Housing face → bore bottom (+) → bearing (−) → spacer (−) → gear hub (−) → gap`.
2. **Build the chain CSV** (`scripts/example_chain.csv` shows the format). Rules:
   - Go around the loop in one direction; dimensions pointing the "positive" way are `+1`, the rest `-1`.
   - Enter unequal tolerances as `plus`/`minus` (both positive numbers). The script handles mean shift.
   - `dist`: `normal` for controlled processes (set `cpk`), `uniform` for unknown processes or purchased parts with no data.
   - Convert GD&T to ± equivalents first: position Ø0.2 → ±0.1 radial; flatness/parallelism add as their own rows.
3. **Run:**
   ```bash
   python scripts/stackup.py chain.csv --lsl 0.10 --usl 0.60 --out stack
   ```
4. **Interpret**
   - Worst-case OK → done; tolerances can be loosened.
   - Worst-case fails but RSS / MC passes → acceptable for high volume if the processes really are in control; state the predicted ppm.
   - MC reject > 2700 ppm (beyond ±3σ) → redesign: tighten the top 1–2 contributors only, or add an adjustment (shim, slotted hole).
5. **Recommend tolerance reallocation**: tighten the contributors with the largest `pct_rss` first; loosen the ones under 5%.

## Output format
- Loop diagram (text) and the chain table
- Results table: Nominal | Worst-case min/max | RSS min/max | MC ±3σ | Reject ppm
- Contributor chart (`stack_contrib.png`) and histogram (`stack_hist.png`)
- 2–3 concrete recommendations

## Limits
1-D linear stacks only. For 2-D/3-D stacks (angular errors, chains with rotation), linearize with sensitivity coefficients: enter `direction` as the partial derivative ∂gap/∂xᵢ instead of ±1, and say so in the report.
Files in this package (3)
  • SKILL.md 2 KB
  • scripts/example_chain.csv 1 KB
  • scripts/stackup.py 5 KB

Versions

The database has no other skills named tolerance-stackup.

Database snapshot: 13.11.2026 · package version ac90cf909a31 (SHA-256 digest of the entire package)

Downloads in the last 30 days: 0 · ranking

Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.

Similar skills

  • 95check_tolerance
    Check a part's toleranced dimensions against what the chosen manufacturing process can actually hold, with a capability index per dimension, DFM flags for too-tight bands and sub-minimum features, and an optional RSS stack-up, then record the verdict in the twin. Use when the…
  • 100monte-carlo-asset-health
    Curated upstream guidance for Monte Carlo Asset Health; use when the workflow matches the user goal.
  • 100monte-carlo-asset-health
    Curated upstream guidance for Monte Carlo Asset Health; use when the workflow matches the user goal.
  • 100cad-design-review
    Review manufacturing-ready mechanical part models, engineering drawings, and assemblies. Covers ISO fits and tolerances, general tolerances (ISO 2768), ISO 20457 plastic molding tolerances, GD&T (ISO 1101 / ASME Y14.5), tolerance stack-ups, plastic snap-fit joints, and…
  • 100monte-carlo-analyze-root-cause
    Curated upstream guidance for Monte Carlo Analyze Root Cause; use when the workflow matches the user goal.
  • 100monte-carlo-analyze-root-cause
    Curated upstream guidance for Monte Carlo Analyze Root Cause; use when the workflow matches the user goal.

Feedback and reports

Your message goes to Bartosz Sokoliński. An email address is needed only for a reply. See the privacy policy.