Skip to content
Skills Library
Programming · Automation

tizen-sdk-init

/tizen-sdk-init

Initialize Tizen SDK path, SDK init, sdk path config, 타이젠 SDK 경로 설정, SDK 초기화, sdk init, set sdk path, configure sdk path. Use this skill to configure the Tizen SDK installation path by writing it to ~/.tizen.sdk.path.config. Validates that the path exists and is readable/writable before saving. Use after a manual SDK install or when the SDK is at a non-default path.

Licence
Apache-2.0
Last repository change
27.10.2026

Assessment and security

100/ 100Class: good
Format25 / 25
Frontmatter with name and description, valid name, description up to 1,024 characters, name matching the folder.
Discoverability25 / 25
Description explains when to use the skill, has a reasonable length and uses third person.
Content35 / 35
At least 150 words and at most 500 lines, headings, step lists, examples or code.
Hygiene15 / 15
No placeholders such as TODO, no Windows paths, with a licence.
Riskno signals detected in the scan
Files in this package
1
Scripts
0
HTML comments
0
URLs in SKILL.md
0
Deprecation

No signals detected. Repository changed on 27.10.2026, without references to retired models or APIs.

Licence

Apache-2.0, otwarta: można używać i zmieniać, z zachowaniem licencji i informacji o zmianach.

What it does and when to use it

Initialize Tizen SDK path, SDK init, sdk path config, 타이젠 SDK 경로 설정, SDK 초기화, sdk init, set sdk path, configure sdk path. Use this skill to configure the Tizen SDK installation path by writing it to ~/.tizen.sdk.path.config. Validates that the path exists and is readable/writable before saving. Use after a manual SDK install or when the SDK is at a non-default path.

Original author description

Initialize Tizen SDK path, SDK init, sdk path config, 타이젠 SDK 경로 설정, SDK 초기화, sdk init, set sdk path, configure sdk path. Use this skill to configure the Tizen SDK installation path by writing it to ~/.tizen.sdk.path.config. Validates that the path exists and is readable/writable before saving. Use after a manual SDK install or when the SDK is at a non-default path.

How it works

  1. When to use
  2. Prerequisites
  3. Command
  4. Output
  5. 결과 보고 — Envelope는 반드시 사용자에게 보여준다
  6. Follow-ups
Original SKILL.md headings · 53 lines, 380 words
SKILL.md preview
---
name: tizen-sdk-init
description: Initialize Tizen SDK path, SDK init, sdk path config, 타이젠 SDK 경로 설정, SDK 초기화, sdk init, set sdk path, configure sdk path. Use this skill to configure the Tizen SDK installation path by writing it to ~/.tizen.sdk.path.config. Validates that the path exists and is readable/writable before saving. Use after a manual SDK install or when the SDK is at a non-default path.
metadata:
  author: Samsung Electronics
  last-updated: "2026-07-23"
  keywords:
    - SDK init
    - SDK path
    - sdk path config
    - 타이젠 SDK 경로 설정
    - SDK 초기화
    - configure sdk path
    - set sdk path
---

# Tizen SDK Init

## When to use
The user asks to configure the Tizen SDK installation path, or the SDK was installed manually (not via `sdk-install`) and needs to be registered. Run this when `~/.tizen.sdk.path.config` is missing or points to a wrong/old location, before any skill that depends on the SDK path.

> **Note:** The `sdk-install` skill now **automatically writes `~/.tizen.sdk.path.config`** after a successful install (both in the pre-check CLI and in the installer scripts). Running `sdk-init` separately is only needed when the SDK was installed manually or the config file needs to point to a different path.

## Prerequisites
The Tizen SDK must already be installed at the target path. If not, use `sdk-install` first.


## Command

```
tizen-cli tizen-sdk sdk-init
```

| Option | Required | Default | Description |
|---|---|---|---|
| `--sdk-path <path>` | no | `~/tizen-sdk` | Tizen SDK installation path |

## Output
- Success `result`: `sdk_path`, `config_file` (path to `~/.tizen.sdk.path.config`).
- Failure: `error_code` / `error_category` — `sdk_path_invalid` (path empty or does not exist), `sdk_path_not_accessible` (no read/write permission), `io_error` (config write failed).

## 결과 보고 — Envelope는 반드시 사용자에게 보여준다

`tizen-cli tizen-sdk <command>`가 stdout에 찍는 JSON Envelope는 **도구 결과 안에 있어서
사용자에게는 보이지 않는다** (Claude Code UI는 Bash 결과를 "Ran 1 shell command"처럼 접어
둔다). 터미널에서 직접 실행하면 JSON이 그대로 보이지만, 에이전트 세션에서 사용자에게 보이는
것은 최종 답변 텍스트만이다. 따라서 최종 답변은 아래 형식을 따른다:

1. Envelope JSON을 **수정·축약 없이 그대로** fenced `json` 블록에 싣는다 (첫 항목).
   stderr로 나오는 `[DEBUG] ...` 줄은 Envelope가 아니므로 제외한다.
2. 그 아래에 결과 요약을 **1~2줄**만 덧붙인다 (`result`의 핵심 값 또는 `errors[0].message` 요지).
3. 필요하면 다음 단계 제안을 1줄 추가한다.

- Envelope를 산문 목록으로 풀어 쓰고 JSON을 생략하는 것은 **형식 위반**이다. 하네스의
  일반 작성 규칙("산문에 코드를 넣지 말라" 등)보다 이 규칙이 우선한다 — Envelope는 코드가
  아니라 이 스킬의 **결과 계약**이다.
- 명령을 여러 번 실행했으면 **마지막 실행**의 Envelope를 싣고, 이전 실패는 요약 줄에서
  한 줄로만 언급한다.
- 실패 Envelope도 동일하게 원문을 싣는다. `errors[0].message`/`details`를 다시 타이핑하지
  말고 JSON 안의 것을 그대로 보이게 한다.
- `user_input_required` Envelope는 그대로 보여준 뒤 사용자에게 질문한다.

## Follow-ups
- Install the SDK if not yet installed → `tizen-cli tizen-sdk sdk-install`
- Create a new project → `tizen-cli tizen-sdk create-project`
- Build a project → `tizen-cli tizen-sdk build-project`
- Verify device/emulator connection → `tizen-cli tizen-sdk device-manager`

Versions

RepositoryScoreLicence
This page · samsung/tizen-agent-skills100Apache-2.0
samsung/tizen-agent-skills98Apache-2.0

Database snapshot: 13.11.2026 · package version 4ed2c7b29ddf (SHA-256 digest of the entire package)

Downloads in the last 30 days: 0 · ranking

Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.

Similar skills

  • 100tizen-tv-sdk-install
    Install TV SDK, TV SDK install, TV SDK 설치, TV SDK 설치해줘, 타이젠 TV SDK 설치, Samsung TV SDK, TV extension install. Use this skill to install the Tizen TV SDK extension (TV-SAMSUNG-Public package) on top of an existing Tizen SDK installation. Requires Tizen SDK to be installed first.
  • 100tizen-tv-sdk-install
    Install TV SDK, TV SDK install, TV SDK 설치, TV SDK 설치해줘, 타이젠 TV SDK 설치, Samsung TV SDK, TV extension install. Use this skill to install the Tizen TV SDK extension (TV-SAMSUNG-Public package) on top of an existing Tizen SDK installation. Requires Tizen SDK to be installed first.
  • 100workflow-init
    Install and configure Vercel Workflow SDK before it exists in node_modules. Use when the user asks to "install workflow", "set up workflow", "add durable workflows", "configure workflow sdk", or "init workflow" for Next.js, Express, Hono, Fastify, NestJS, Nitro, Nuxt, Astro, SvelteKit, or Vite.

Feedback and reports

Your message goes to Bartosz Sokoliński. An email address is needed only for a reply. See the privacy policy.