sidechain-setup
/sidechain-setup
Use when the user wants to set up sidechain compression - typically kick → bass, kick → pads, vocals → music bed. Examples - "sidechain my bass to the kick", "make the synths duck under the vocal", "add pumping to the chords".
- Author
- glincker ↗
- Repository
- ableton-skills ↗
- Licence
- MIT
- Last repository change
- 22.09.2026
Assessment and security
- Files in this package
- 1
- Scripts
- 0
- HTML comments
- 0
- URLs in SKILL.md
- 0
No signals detected. Repository changed on 22.09.2026, without references to retired models or APIs.
MIT, open: use and modify while retaining author attribution.
What it does and when to use it
Use when the user wants to set up sidechain compression - typically kick → bass, kick → pads, vocals → music bed. Examples - "sidechain my bass to the kick", "make the synths duck under the vocal", "add pumping to the chords".
Triggers from the description
Original author description
Use when the user wants to set up sidechain compression - typically kick → bass, kick → pads, vocals → music bed. Examples - "sidechain my bass to the kick", "make the synths duck under the vocal", "add pumping to the chords".
How it works
- Workflow
- Don'ts
- Quick reference table
SKILL.md preview
--- name: sidechain-setup description: Use when the user wants to set up sidechain compression - typically kick → bass, kick → pads, vocals → music bed. Examples - "sidechain my bass to the kick", "make the synths duck under the vocal", "add pumping to the chords". --- # Sidechain Setup Set up sidechain compression routing. Different DAWs/MCP servers expose this differently — read the available tools and use the simplest path. ## Workflow ### 1. Identify the source and target - **Source** = trigger (the track that *causes* the duck) — usually kick or vocal - **Target** = the track that *gets ducked* — usually bass, pads, or music bed Confirm with user: "Sidechain target = bass on track 2, source = kick on track 1?" ### 2. Choose the technique #### A. Compressor sidechain (standard for kick→bass) - Add Compressor to the target track - Enable sidechain input on the compressor - Route source: select the kick track as the input - Settings: - Ratio: 4:1 - Attack: 5 ms - Release: 80-120 ms (release should match the tempo — at 120 BPM, 1 beat = 500ms, so 100ms ≈ 1/8 note) - Threshold: set so that GR shows -4 to -6 dB on each kick hit - Output gain: +1 to +2 dB to compensate #### B. Glue Compressor sidechain (more musical for buses) Same as above but using Glue Compressor — gives a more "analog" pumping sound, typical for house/EDM masters where you want musical pumping. #### C. LFO Tool / volume automation (creative) If the user wants extreme rhythmic pumping (EDM-style 4/4 pump): - Use Auto Filter or a volume LFO modulator if no LFO Tool plugin - LFO shape: sawtooth (fast attack, slow release looks like ⏐╲⏐╲) - Sync to 1/4 notes - Depth: -6 to -12 dB - This is used when there's no actual kick (e.g., during a breakdown) but you want the pump feel. #### D. Volume envelope automation (per-clip) For surgical control on a specific section: - Show automation on the target track - Draw a manual ducking envelope tied to the source's hits - Useful for vocal-driven ducking on a music bed ### 3. Apply Use `add_device` and `set_device_parameter` to route. If the MCP server doesn't expose sidechain routing directly, write the parameters that *can* be set and tell the user the manual step: > *"Compressor added to bass track with 4:1 ratio, 5ms attack, 100ms release. The MCP can't set the sidechain source — please click the sidechain section and select 'Kick' from the input dropdown manually. Then I'll dial in the threshold."* ### 4. Verify After applying, ask user to play the kick + bass together. Adjust if needed: - Pumping too obvious? → reduce ratio to 3:1 or release to 60ms - Pumping not enough? → ratio 6:1 or threshold lower - Bass dipping too long? → shorten release - Bass missing the next beat? → release too long, shorten ## Don'ts - Don't sidechain everything by default — kick→bass is universal, but pad/synth ducking is genre-specific (huge in EDM, rare in jazz). - Don't use ratios above 8:1 unless going for a deliberate pump effect. - Don't sidechain the master bus — that's a special-case mastering technique, not a mix move. - Don't apply without listening — sidechain is a feel adjustment, settings depend on what the user hears. ## Quick reference table | Use case | Ratio | Attack | Release | GR target | | --- | --- | --- | --- | --- | | Kick → bass (rock/pop) | 4:1 | 5 ms | 100 ms | -4 dB | | Kick → bass (EDM pump) | 8:1 | 1 ms | 200 ms | -10 dB | | Kick → pad/chord | 3:1 | 10 ms | 150 ms | -3 dB | | Vocal → music bed | 2:1 | 15 ms | 300 ms | -2 dB | | Snare → reverb tail | 3:1 | 5 ms | 80 ms | -4 dB |
Versions
The database has no other skills named sidechain-setup.
Database snapshot: 13.11.2026 · package version 7b0d65c63979 (SHA-256 digest of the entire package)
Downloads in the last 30 days: 0 · ranking
Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.
Similar skills
- 90vocal-chain
Use when the user has recorded vocals and wants a processing chain set up. Examples - "set up my vocal chain", "process this vocal", "make the vocal sit in the mix", "give me a pop vocal chain", "make this rap vocal aggressive". - 100session-architect
Session setup methodology for Reaper DAW. Guides track hierarchy, bus routing, send/receive configuration, sidechain setup, and genre-specific session templates. Use this skill whenever the user wants to set up a new mixing session, organize tracks into folders and buses, create… - 90emerick-harmony-arrangement
Write the chord progressions, form and accompanying band parts (drums, bass, comping, pads) of a song in Emerick, and pick and screen the instruments that play them, either as MIDI parts or with the built-in style arranger. Use this skill whenever a song in Emerick needs chords,… - 90sound-designer
Use when the user wants to design a synth patch from scratch or modify an existing one - lead, bass, pad, pluck, lush keys, FX. Targets stock Ableton synths (Operator, Wavetable, Analog, Drift). Examples - "make me a wide supersaw lead", "design a sub bass", "give me a lush pad like Olafur Arnalds".