Skip to content
Skills Library
Programming · Planning

openspec-propose

/openspec-propose

Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.

Repository
foreman ↗
Licence
Apache-2.0
Last repository change
15.09.2026

Assessment and security

92/ 100Class: good
Format25 / 25
Frontmatter with name and description, valid name, description up to 1,024 characters, name matching the folder.
Discoverability25 / 25
Description explains when to use the skill, has a reasonable length and uses third person.
Content27 / 35
At least 150 words and at most 500 lines, headings, step lists, examples or code.
Hygiene15 / 15
No placeholders such as TODO, no Windows paths, with a licence.
Riskno signals detected in the scan
Files in this package
1
Scripts
0
HTML comments
0
URLs in SKILL.md
0
Deprecation

No signals detected. Repository changed on 15.09.2026, without references to retired models or APIs.

Licence

Apache-2.0, otwarta: można używać i zmieniać, z zachowaniem licencji i informacji o zmianach.

What it does and when to use it

Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.

Original author description

Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.

How it works

SKILL.md has no level-two headings · 113 lines, 1,145 words

SKILL.md preview
---
name: openspec-propose
description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.
allowed-tools: Bash(openspec:*)
license: MIT
compatibility: Requires openspec CLI.
metadata:
  author: openspec
  version: "1.0"
  generatedBy: "1.7.0"
---

Propose a new change - create the change and generate all artifacts in one step.

I'll create a change with the artifacts your schema defines. With the default spec-driven schema that is:
- proposal.md (what & why)
- `specs/<capability>/spec.md` (what the system must do - a delta, not the main spec)
- design.md (how)
- tasks.md (implementation steps)

When ready to implement, run $openspec-apply-change

---

**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.

**Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.

**Steps**

1. **If no clear input provided, ask what they want to build**

   Ask the user (open-ended, no preset options):
   > "What change do you want to work on? Describe what you want to build or fix."

   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).

   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.

2. **Create the change directory**
   ```bash
   openspec new change "<name>"
   ```
   This creates a scaffolded change in the planning home resolved by the CLI with `.openspec.yaml`.

3. **Get the artifact build order**
   ```bash
   openspec status --change "<name>" --json
   ```
   Parse the JSON to get:
   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
   - `artifacts`: list of all artifacts, each with its `status` and its `requires` edges (the artifact IDs it directly depends on)
   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context. Use these instead of assuming repo-local paths.

4. **Create every artifact in the required set**

   Use a todo list to track progress through the artifacts.

   Loop through artifacts in dependency order (artifacts with no pending dependencies first):

   a. **For each artifact that is `ready` (dependencies satisfied)**:
      - Get instructions:
        ```bash
        openspec instructions <artifact-id> --change "<name>" --json
        ```
      - The instructions JSON includes:
        - `context`: Project background (constraints for you - do NOT include in output)
        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
        - `template`: The structure to use for your output file
        - `instruction`: Schema-specific guidance for this artifact type
        - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - stop and pick another artifact
        - `resolvedOutputPath`: Resolved path or pattern to write the artifact
        - `dependencies`: Completed artifacts to read for context
      - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
      - If the `instruction` field delegates creation to a specific skill or command, invoke it to produce the artifact instead of writing the file yourself, then verify the artifact file exists at `resolvedOutputPath`
      - Otherwise create the artifact file using `template` as the structure and write it to `resolvedOutputPath`. If `resolvedOutputPath` is a glob, follow `instruction` to choose the concrete file path
      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
      - Show brief progress: "Created <artifact-id>"

   b. **Continue until every artifact in the required set exists (not just `apply.requires`)**
      - After creating each artifact, re-run `openspec status --change "<name>" --json`
      - The required set is `applyRequires` plus every artifact reachable from those by following the `requires` edges in `status --json` - walk them transitively (spec-driven closes over proposal, specs, design, tasks). Leave artifacts outside that set alone
      - `status` is file-existence only, so an `applyRequires` artifact reading `done` does NOT mean its dependencies exist - writing `tasks.md` early marks `tasks` done while `specs` was never written. Use each artifact's `requires` edges, not its `status`, to build the required set: a `done` artifact still lists what it depends on
      - An artifact already reading `status: "skipped"` is satisfied: the change declares `skip_specs` in `.openspec.yaml`, so its files must NOT exist. Never try to create one
      - Create every artifact in the required set that is missing, then re-check - creating one can unblock others
      - Skip one only when `status` already reports it `skipped`, or when its own `instruction` says it is conditional: run `openspec instructions <artifact-id> --change "<name>" --json` and skip only if its `instruction` field marks it optional (e.g. "create only if..."). Spec-driven's `design.md` qualifies; `specs` qualifies only via the `skipped` status above, never by your own judgment. Tell the user, and do not reconsider it
      - Dependencies are enablers, not gates: if a required artifact is still `blocked` only because you skipped a conditional dependency, write it anyway
      - Stop when every artifact in the required set is `done`, `skipped`, or was deliberately skipped

   c. **If an artifact requires user input** (unclear context):
      - Ask the user to clarify
      - Then continue with creation

5. **Show final status**
   ```bash
   openspec status --change "<name>"
   ```

**Output**

After completing all artifacts, summarize:
- Change name and location
- List of artifacts created with brief descriptions, plus any conditional artifact you skipped and why
- What's ready: "All artifacts needed for implementation are ready."
- Prompt: "Run `$openspec-apply-change` or ask me to implement to start working on the tasks."

**Artifact Creation Guidelines**

- Follow the `instruction` field from `openspec instructions` for each artifact type - it is the authoritative guidance, even for familiar artifact names
- If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly
- The schema defines what each artifact should contain - follow it
- Read dependency artifacts for context before creating new ones
- Use `template` as the structure for your output file - fill in its sections
- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
  - These guide what you write, but should never appear in the output

**Guardrails**
- Create every artifact the apply phase transitively depends on, not just the ids listed in `apply.requires`
- Always read dependency artifacts before creating a new one - re-read from disk, not from conversation memory (files may have changed since you last saw them)
- If context is critically unclear, ask the user - but prefer making reasonable decisions to keep momentum
- If a change with that name already exists, ask if user wants to continue it or create a new one
- Verify each artifact file exists after writing before proceeding to next

Versions

RepositoryScoreLicence
This page · charleshoskinson/foreman92Apache-2.0
yangl326-Dylan/agentkeeper92MIT
elalfner/relevo92MIT
tsedio/tsed92MIT
lorelum/lorelum92Apache-2.0
shunwuyu/ai_lesson92MIT
bellows-ai/factory92MIT
jabrena/cursor-rules-java92Apache-2.0
getsentry/sentry-mcp92Apache-2.0

Database snapshot: 13.11.2026 · package version e7df206c5e9b (SHA-256 digest of the entire package)

Downloads in the last 30 days: 0 · ranking

Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.

Similar skills

  • 100coograph-propose
    Propose a new change with all artifacts generated in one step. Use when the user wants to describe what they want to build and get a complete proposal with specs and tasks ready for implementation.
  • 100spec-propose
    Draft the OpenSpec change artifacts - `proposal.md`, the `specs/` delta, `design.md`, `tasks.md` - on a fresh branch, install the wave rules that make `tasks.md` parallel-safe, validate, and commit. Use when the user says "propose this", "write the proposal", "spec this out",…
  • 100openspec-continue-change
    Creates exactly the next ready OpenSpec artifact for a change, one at a time — proposal, then specs or design (siblings), then tasks. Use for "what's the next artifact", "create the next artifact", "draft the next OpenSpec file", or when the user wants to progress artifacts step…
  • 100openspec-apply-change
    Implements the pending tasks of an OpenSpec change against its proposal, specs, and design, looping until done or blocked. Use for "implement this change", "start/continue implementing", "work through the tasks", or "keep going on <change>". Can be invoked any time tasks exist,…
  • 100sdd-propose
    Use when creating a new change with all SDD artifacts — proposal, delta specs, design, and tasks. Triggers: "propose a change", "create a change for X", "I want to implement feature Y", "start a new change", "let's build X".
  • 100openspec-apply-change
    Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks. Also use when the user says "openspec apply", "opsx apply", or "openspec implement".

Feedback and reports

Your message goes to Bartosz Sokoliński. An email address is needed only for a reply. See the privacy policy.