multisimforge
/multisimforge
Control a local NI Multisim 14 install from the command line - build editable .ms14 circuits from a netlist plus coordinates (auto-routing, part rotation/mirroring, explicit wire polylines, instrument panel presets), export a schematic preview and self-check the wiring, get DC operating point / AC sweep / transient numbers from Multisim's own simulation engine, open Multisim and capture real oscilloscope and bode plotter panels, pull any part (555, 74-series, op-amps, transistors) from the Multisim database, and read the parts and nets of an existing .ms14. Use this skill whenever a task invol
- Author
- AmaneSuzuha000 ↗
- Repository
- MultisimForge ↗
- Licence
- MIT
- Last repository change
- 12.11.2026
Assessment and security
- Files in this package
- 12
- Scripts
- 0
- HTML comments
- 0
- URLs in SKILL.md
- 0
No signals detected. Repository changed on 12.11.2026, without references to retired models or APIs.
MIT, open: use and modify while retaining author attribution.
What it does and when to use it
Control a local NI Multisim 14 install from the command line - build editable .ms14 circuits from a netlist plus coordinates (auto-routing, part rotation/mirroring, explicit wire polylines, instrument panel presets), export a schematic preview and self-check the wiring, get DC operating point / AC sweep / transient numbers from Multisim's own simulation engine, open Multisim and capture real oscilloscope and bode plotter panels, pull any part (555, 74-series, op-amps, transistors) from the Multisim database, and read the parts and nets of an existing .ms14. Use this skill whenever a task invol
Original author description
Control a local NI Multisim 14 install from the command line - build editable .ms14 circuits from a netlist plus coordinates (auto-routing, part rotation/mirroring, explicit wire polylines, instrument panel presets), export a schematic preview and self-check the wiring, get DC operating point / AC sweep / transient numbers from Multisim's own simulation engine, open Multisim and capture real oscilloscope and bode plotter panels, pull any part (555, 74-series, op-amps, transistors) from the Multisim database, and read the parts and nets of an existing .ms14. Use this skill whenever a task invol
How it works
- Hard rules
- Commands
- Workflow
- Known limitations
SKILL.md preview
--- name: multisimforge description: Control a local NI Multisim 14 install from the command line - build editable .ms14 circuits from a netlist plus coordinates (auto-routing, part rotation/mirroring, explicit wire polylines, instrument panel presets), export a schematic preview and self-check the wiring, get DC operating point / AC sweep / transient numbers from Multisim's own simulation engine, open Multisim and capture real oscilloscope and bode plotter panels, pull any part (555, 74-series, op-amps, transistors) from the Multisim database, and read the parts and nets of an existing .ms14. Use this skill whenever a task involves Multisim, .ms14 files, circuit simulation screenshots, simulation data, scope or bode panel images, drawing a circuit in Multisim, or verifying one - even if the user never names the tool. --- # MultisimForge Control a local Multisim 14.3 install from the command line. The Python package and this document live in the same directory. From any directory, call it as below; every command prints JSON: ``` python -m multisimforge <command> ... ``` (If the Python Scripts directory is on PATH you can also write `multisimforge <command>`.) ## Hard rules - **Screenshots must come from a real Multisim window** (`capture`, or the user's own screenshot). If capturing fails, explain why and ask the user to capture manually - never fake an instrument panel or a schematic with drawing code. - **Numbers must come from a real simulation**: `sim` uses Multisim's own netlist and device models, so its output can be quoted directly. Never pass an estimate off as a simulated value. - By default `capture` produces raw `PrintWindow` bitmaps plus a labelled `*_montage.png` composite without taking desktop focus; pass `--desktop-screen` only when an unmodified desktop screenshot is needed (that option borrows the foreground for about a minute). `capture` refuses if another Multisim window with the same file stem is already open, and closes only the window it launched. - Generated `.ms14` file names may only contain letters, digits, underscore and hyphen (instrument presets and probes match on the file name). Directories may contain any characters. ## Commands | Command | Purpose | |---|---| | `parts list [keyword]` | search the part library (name, family, pin order) | | `parts show <model>` | pin order, hidden power pins, pin offsets and directions at 0° (for planning layout) | | `parts fetch <model>` | pull a model from the Multisim database when the library lacks it (a few seconds), e.g. `LM555CN`, `74LS00N`, `UA741CD` | | `parts harvest <.ms14 or dir>` | harvest parts from the user's own designs | | `build spec.json [--preview x.png]` | generate the .ms14 and self-check it; `--preview` also exports a preview image | | `preview x.ms14 x.png` | export the schematic through Multisim (a few seconds) | | `check x.ms14` | self-check: wiring vs nets, overlapping parts, wires through parts, crossing count | | `inspect x.ms14` | report parts, nets and instrument settings (works on the user's own designs) | | `sections x.ms14 <ref>` | read-only native `EnumSections` query for a package refdes (e.g. `U1`) | | `sim x.ms14 --nets a,b --op / --ac 10,100k[,points] --out b --in a --at 1k / --tran 10m[,rate] [--csv dir]` | simulation data from Multisim | | `cursors file.csv --column col --x1 a --x2 b` | interpolate numerical cursors from simulator CSV (never modifies GUI cursors) | | `spice x.cir --cmd "tran 1u 10m"` | hand arbitrary SPICE text to Multisim's command-line engine | | `capture x.ms14 outdir [--cur1 v --cur2 v] [--desktop-screen]` | real screenshots: `<stem>_circuit.png`, `<stem>_XSC1.png` panels, `<stem>_montage.png` (and optional background `--cur1`/`--cur2` cursor placement) | | `set-sim-time x.ms14 20ms` | change the interactive simulation stop time | | `com status / stop` | inspect or release the background COM worker | | `decode / encode` | .ms14 ↔ XML (debugging) | ## Workflow 1. **Confirm the parts**: look up every model in the netlist with `parts list` / `parts show`; `parts fetch` anything missing. Read the pin order and `pin_xy` to decide the netlist form and the orientation. 2. **Write spec.json** (syntax in `docs/spec.md`): netlist + coordinates/angle per part + ground symbol positions + instrument presets + sim_time. 3. **Generate and look**: `build spec.json --preview x.png`, then open the preview. Non-empty `problems` means the wiring is wrong and must be fixed; `warnings` about overlaps, wires through parts or many crossings mean moving coordinates and rebuilding - usually one or two rounds. 4. **Get numbers**: `sim` gives operating point, gain/phase/−3 dB frequency/resonance peak, transient peak and period. Compare against theory before quoting them. 5. **Capture**: by default `capture` runs via `PrintWindow` in the background without taking desktop focus; if you pass `--desktop-screen`, remind the user not to touch the mouse or keyboard during the run. Check each image: does the trace fill the screen (`scope_coverage` near 1), are the scale settings sensible (trace at least a third of the screen height, no clipping)? If not, change `instruments` or `sim_time`, rebuild and capture again. 6. **Deliver**: state which images are Multisim screenshots and which numbers came from `sim`; surface any `warnings` you did not resolve. ## Known limitations - Multisim 14.3 still resets saved cursor positions on file reopen; pass `capture ... --cur1 <t1|freq> [--cur2 <t2>]` to position live GUI cursors in background and read their UI-verified readouts, or use `sim --csv` + `cursors` for CSV interpolation. - Multi-section parts (`U1.A`/`U1.B` for LM324, 7404N, MMBD7000LT1) share one physical package and auto-inherit shared `COM` pins; digital parts still keep VCC/GND on hidden pins unless wired explicitly. - Routing is automatic A*, so dense circuits can still detour - move coordinates or pass explicit `wires` (endpoints must land on a pin or a wire intersection). - `parts fetch` reads the master DB directly via pure-Python Jet3/4 decryption + 32-bit ADODB (no Node.js required; Node decoder kept as fallback). Unsupported 3D/virtual categories (`Basic/3D_VIRTUAL`) still fault inside NI's COM process; use `parts harvest` if a category fails. Part library mechanics and local paths are in `docs/parts.md`.
Files in this package (12)
- .gitattributes 1 KB
- .gitignore 1 KB
- CHANGELOG.md 17 KB
- CONTRIBUTING.md 2 KB
- LICENSE 1 KB
- README.md 18 KB
- SECURITY.md 1 KB
- SKILL.md 6 KB
- THIRD_PARTY_NOTICES.md 2 KB
- mcp.json.example 1 KB
- pyproject.toml 1 KB
- server.json 1 KB
Versions
The database has no other skills named multisimforge.
Database snapshot: 13.11.2026 · package version da8482247581 (SHA-256 digest of the entire package)
Downloads in the last 30 days: 0 · ranking
Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.
Similar skills
- 100multisim-cli
用文字控制本机 NI Multisim 14 的命令行工具:按网表和坐标生成可编辑的 .ms14 电路(自动布线、元件旋转、仪器面板预设),导出预览图并自检连线,用 Multisim 自己的仿真引擎取直流工作点/交流扫描/瞬态数值,打开 Multisim 截取真实的示波器、波特图仪面板和电路截图,从 Multisim 数据库取任意元件(555、74 系列、各型号运放三极管),读出已有 .ms14 的元件和网络。只要任务涉及 Multisim、.ms14 文件、电路仿真截图、仿真数据、示波器/波特图仪画面、在 Multisim… - 98multisim-file-tools
Read NI Multisim design files (.ms14/.msm/.ewb/.ms11/.ms12/.ms13) offline without starting Multisim, and run SPICE decks through a locally installed Multisim engine. Use when a task involves inspecting a Multisim project's components, values, instrument settings or schema; when… - 100multisim-scheme
Builds NI Multisim 14 schematics (.ms14) that open without dialogs and simulate at once — from a picture, a screenshot or a description, laid out as in the picture, with real parts from the Multisim database (missing ones are fetched from the user's own Multisim with one .bat… - 100multisim-toolkit
通过 DSH 插件驱动本机 NI Multisim 14.3:开关 `.ms14` 设计、读写元件值与电路参数、跑 DC/AC/瞬态/SPICE 分析、导出原理图与 BOM/网表、截取实机电路图与实机波形图、离线解析 `.ms14`。当任务涉及 Multisim、电路仿真、原理图截图、实机波形截图、真值表/伯德图/波形数据,或要在本机跑 SPICE 而手边没有 LTspice/ngspice 时使用。 - 98multisim-spice
把自然语言电路描述变成经过验证、可在 Multisim 打开的 SPICE 网表。流程为「生成 SPICE 网表 → 用内置 ngspice 批处理自检 → 校验通过后导入 NI Multisim」。当用户要设计电路、画电路、做电路仿真、写 SPICE 网表、做 prelab 电路、用 Multisim 仿真时触发。Also triggers on: SPICE netlist generation, circuit design, Multisim simulation, ngspice check, electronics prelab. - 95ee-lab-report
南京邮电大学《电工电子实验技术》课程的预习报告和实验报告助手:读课本扫描页、做理论计算和预期波形、用 multisim-cli 搭电路、取仿真数值并截取真实的 Multisim 仪器面板截图、插入用户手绘的电路图/波形照片,按官方模板生成 docx 和 pdf。只要用户提到电工电子实验、预习报告、实验报告、实验课、Multisim 仿真截图、示波器/波特图仪截图、课本第几页的实验、手绘电路图拍照、电子报告官方格式,或者在“实验”目录下要做某次实验的材料,都应使用本 skill,即使没明说“报告”二字。