Skip to content
Skills Library
AI & agents · Automation

init

/init

Write the project notes the code graph cannot know (what the project is for, conventions a newcomer would get wrong, external services) to .claude/uccif/summary.md and a short UCCIF block in AGENTS.md, with test commands verified. Use this when the user runs /init, asks to set up, initialise or refresh UCCIF for a project ("init uccif", "ghi summary", "cập nhật ghi chú dự án"), or a hook says the project notes are stale. Not for code changes.

Repository
uccif ↗
Licence
MIT
Last repository change
07.11.2026

Assessment and security

96/ 100Class: good
Format25 / 25
Frontmatter with name and description, valid name, description up to 1,024 characters, name matching the folder.
Discoverability25 / 25
Description explains when to use the skill, has a reasonable length and uses third person.
Content31 / 35
At least 150 words and at most 500 lines, headings, step lists, examples or code.
Hygiene15 / 15
No placeholders such as TODO, no Windows paths, with a licence.
Riskno signals detected in the scan
Files in this package
1
Scripts
0
HTML comments
1
URLs in SKILL.md
0
Deprecation

No signals detected. Repository changed on 07.11.2026, without references to retired models or APIs.

Licence

MIT, open: use and modify while retaining author attribution.

What to check before installing
  • SKILL.md zawiera komentarze HTML (1). Nie widać ich w podglądzie Markdown, a model je czyta.

What it does and when to use it

Write the project notes the code graph cannot know (what the project is for, conventions a newcomer would get wrong, external services) to .claude/uccif/summary.md and a short UCCIF block in AGENTS.md, with test commands verified. Use this when the user runs /init, asks to set up, initialise or refresh UCCIF for a project ("init uccif", "ghi summary", "cập nhật ghi chú dự án"), or a hook says the project notes are stale. Not for code changes.

Triggers from the description

init uccifghi summarycập nhật ghi chú dự án
Original author description

Write the project notes the code graph cannot know (what the project is for, conventions a newcomer would get wrong, external services) to .claude/uccif/summary.md and a short UCCIF block in AGENTS.md, with test commands verified. Use this when the user runs /init, asks to set up, initialise or refresh UCCIF for a project ("init uccif", "ghi summary", "cập nhật ghi chú dự án"), or a hook says the project notes are stale. Not for code changes.

How it works

SKILL.md has no level-two headings · 40 lines, 474 words

SKILL.md preview
---
name: init
description: Write the project notes the code graph cannot know (what the project is for, conventions a newcomer would get wrong, external services) to .claude/uccif/summary.md and a short UCCIF block in AGENTS.md, with test commands verified. Use this when the user runs /init, asks to set up, initialise or refresh UCCIF for a project ("init uccif", "ghi summary", "cập nhật ghi chú dự án"), or a hook says the project notes are stale. Not for code changes.
---
<!-- generated from plugins/uccif/skills by plugins/uccif/scripts/build_gemini.py; edit the source -->

# UCCIF init: the notes the graph does not have

The `<project>-map` and `-mod-*` skills already hold modules, entry points, routes and commands,
generated from CodeGraph and refreshed by hooks. Init exists only for the facts no index can
derive, so re-deriving the layout here would just duplicate the map and drift from it.

Budget: about 7 tool calls, at most 10. Run each command on its own (no `;`, `&&`, `echo`):
compound commands need the user's approval, and this skill should run without prompts.

1. `uccif detect`. If `codegraph.indexed` is false, run the `codegraph` skill first: the
   notes point to the map skill, which needs the index.
2. Load the `<project>-map` skill, so you know the layout without reading files for it.
3. Read at most 4 files, in one parallel batch, with offset/limit: README, the main manifest, and
   up to 2 of: the existing `.claude/uccif/summary.md`, CONTRIBUTING / AGENTS.md, an env example
   (`.env.example`). Never lockfiles or generated files, and never `.env` or any file that may
   hold secrets: an external service is named in the env example or the code, and reading a key
   would put it in the transcript.
4. Pipe the summary into `uccif summary write` (heredoc; `--replace` if one exists, merged with
   the user's text). **At most 20 lines, only what the graph cannot know**: what the project is
   for, conventions a newcomer would get wrong, external services. End each claim with
   `[src: file]` so a reader can check it. No modules, commands or layout, and nothing CLAUDE.md /
   AGENTS.md already says (the agent reads those anyway): point to them instead.
   Write under `.claude/uccif/` only through these `uccif` commands. The command also stores the drift baseline that later
   tells you when these notes go stale.
5. `uccif verify-tests`, once. It lists the tests (vitest list, jest --listTests, pytest
   --collect-only, go test -list, cargo test -- --list) or runs them only when the runner has no
   list mode, with a 60 s timeout, installing nothing. Whatever it prints, do not retry, try
   another command or install anything: a command it could not verify is marked `(unverified)`,
   which is the honest result.
6. Pipe 2–3 description lines into `uccif agents-md write` (heredoc). It composes the block of
   at most 15 lines (commands from the manifests, `(unverified)` next to those not verified, a
   pointer to the map skill) and writes it to AGENTS.md (CLAUDE.md imports it, or gets a copy).
   Exit 3 means a block already exists: show the user the change and ask before rerunning with
   `--replace`, because that block may hold their edits. Without an answer, stop there.

Reply in the user's language, in at most 5 lines: the files written and what the user may want to
confirm. Never edit source code, install anything, read secrets or write placeholder docs.

Versions

RepositoryScoreLicence
This page · phongng255/uccif96MIT
CodaColaLight/nightmill100Apache-2.0
userKael/rastro100MIT
elalfner/relevo100MIT
abatyuk/okf100MIT
duronext/jig100MIT
sh5623/e2e-rail100MIT
Calvin-LLC/skills100MIT
arxdsilva/ai-loops100MIT

Database snapshot: 13.11.2026 · package version 17075408381f (SHA-256 digest of the entire package)

Downloads in the last 30 days: 0 · ranking

Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.

Similar skills

  • 96uccif-init
    Write the project notes the code graph cannot know (what the project is for, conventions a newcomer would get wrong, external services) to .agents/uccif/summary.md and a short UCCIF block in AGENTS.md, with test commands verified. Use this when the user runs /uccif-init, asks to…
  • 86resume
    Resume work saved in UCCIF task memory in Codex. Use for $uccif:resume or a request to continue a recorded UCCIF task; recheck stale progress before editing.
  • 100claude-md-init
    Use when a repo has no CLAUDE.md, or the user asks to create/refresh CLAUDE.md or project instructions for Claude Code. Generates a short, verified CLAUDE.md from the repo's real build/test/lint commands and layout, and never invents commands.
  • 96kybes-init
    Set up kybes in the current project (config, path rules, CLAUDE.md block, scaffold, CI, optional example schemas, first model generation). Use when the user asks to install, initialise, set up or update kybes in a repository.
  • 100project-init
    [Utilities] Use when setting up or re-evaluating portable project context end to end: project-config, reference docs, CLAUDE.md, AGENTS.md. One piece only: project-config, docs-manager --mode=init or ai-context-refresh.
  • 100project-init
    [Utilities] Use when setting up or re-evaluating portable project context end to end: project-config, reference docs, CLAUDE.md, AGENTS.md. One piece only: project-config, docs-manager --mode=init or ai-context-refresh.

Feedback and reports

Your message goes to Bartosz Sokoliński. An email address is needed only for a reply. See the privacy policy.