deploy
/deploy
Build, test and deploy the robot software - flash the Arduino firmware and/or build the ROS 2 Humble workspace and bring up simulation or hardware. Use when the user asks to deploy, flash, upload, build the workspace, or run the robot.
- Author
- basheeraltawil ↗
- Repository
- parallel-manipulator-imu-control ↗
- Licence
- MIT
- Last repository change
- 30.10.2026
Assessment and security
- Files in this package
- 2
- Scripts
- 0
- HTML comments
- 0
- URLs in SKILL.md
- 0
No signals detected. Repository changed on 30.10.2026, without references to retired models or APIs.
MIT, open: use and modify while retaining author attribution.
What it does and when to use it
Build, test and deploy the robot software - flash the Arduino firmware and/or build the ROS 2 Humble workspace and bring up simulation or hardware. Use when the user asks to deploy, flash, upload, build the workspace, or run the robot.
Original author description
Build, test and deploy the robot software - flash the Arduino firmware and/or build the ROS 2 Humble workspace and bring up simulation or hardware. Use when the user asks to deploy, flash, upload, build the workspace, or run the robot.
How it works
- 0. Gate: tests must pass first
- 1. Firmware → Arduino
- 2. ROS 2 workspace
- 3. Bring-up targets
- 4. Report
SKILL.md preview
--- name: deploy description: Build, test and deploy the robot software - flash the Arduino firmware and/or build the ROS 2 Humble workspace and bring up simulation or hardware. Use when the user asks to deploy, flash, upload, build the workspace, or run the robot. --- # Deploy the pm3rrr robot Read `deploy-config.md` (next to this file) for boards, ports and targets. ## 0. Gate: tests must pass first ```bash python3 -m pytest -q ros2_ws/src/pm3rrr_core/test python3 tools/cad_to_urdf/step4_validate_urdf.py make -C firmware/test ``` Stop and report if anything fails. Never deploy red. ## 1. Firmware → Arduino ```bash arduino-cli core install arduino:avr # once arduino-cli compile --fqbn <FQBN> firmware/pm3rrr_firmware arduino-cli upload --fqbn <FQBN> -p <PORT> firmware/pm3rrr_firmware ``` After the upload, open the serial monitor (115200) and expect `OK ready`. If the IMU is missing, the firmware reports `E hand IMU not found` and starts in STREAM mode. **Always ask the user before uploading:** the robot will move to home. ## 2. ROS 2 workspace ```bash source /opt/ros/humble/setup.bash cd ros2_ws && rosdep install --from-paths src -y --ignore-src colcon build --symlink-install && source install/setup.bash colcon test && colcon test-result --verbose ``` ## 3. Bring-up targets | Target | Command | |---|---| | sim-rviz | `ros2 launch pm3rrr_bringup sim_rviz.launch.py scenario:=<scenario>` | | sim-gazebo | `ros2 launch pm3rrr_bringup sim_gazebo.launch.py scenario:=<scenario> gui:=<true/false>` | | hardware | `ros2 launch pm3rrr_bringup hardware.launch.py port:=<PORT> scenario:=<scenario>` | For hardware: confirm the e-stop is reachable, then check `/pm3rrr/status` shows `OK`. ## 4. Report Report the versions (git commit), what was flashed or built, the test results, and any warnings.
Files in this package (2)
- SKILL.md 2 KB
- deploy-config.md 1 KB
Versions
| Repository | Score | Licence |
|---|---|---|
| This page · basheeraltawil/parallel-manipulator-imu-control | 95 | MIT |
| zeitlos/lucity | 100 | AGPL-3.0 |
| jeremylongshore/tons-of-skills-marketplace | 100 | MIT |
| zeitlos/lucity | 100 | AGPL-3.0 |
| microsoft/power-platform-skills | 100 | MIT |
| friendlyinternet/nuxt-crouton | 100 | MIT |
| wraith-proxy/wraith-skills | 100 | MIT |
| jikig-ai/soleur | 100 | Apache-2.0 |
| curiositech/windags-skills | 100 | Apache-2.0 |
Database snapshot: 13.11.2026 · package version 018999c2855f (SHA-256 digest of the entire package)
Downloads in the last 30 days: 0 · ranking
Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.
Similar skills
- 90platformio
Use when working in a PlatformIO project (platformio.ini present) or when asked to build, flash, monitor, test, or debug firmware for ESP32, Arduino, STM32, RP2040, or any board PlatformIO supports. Drives the platformio MCP tools in the right order and reads their results correctly. - 96ros2-development
Use when installing, building, or verifying ROS 2. - 95robotics-testing
Testing strategies, patterns, and tools for robotics software. Use this skill when writing unit tests, integration tests, simulation tests, or hardware-in-the-loop tests for robot systems. Trigger whenever the user mentions testing ROS nodes, pytest with ROS, launch_testing,… - 100flashduck-dev
Use when helping someone build, flash, modify, or extend a Flashduck robot — the voice firmware in firmware/voice, the DuckClaw on-device agent in firmware/duckclaw, or the shared six-servo hardware. Covers environment checks/install, compile/flash, eyes, actions, gait, web… - 100firmware
Robot-dog firmware dry-run planning and validation skill for MCU target, motor-control loop, CAN protocol, safety state machine, calibration contract, build manifest, and hardware bring-up gates. Use this skill when the user asks for embedded firmware, motor firmware, FOC loop,… - 100ros2-engineering-skills
Comprehensive ROS 2 engineering guide covering workspace setup, node architecture, communication patterns (topics/services/actions with QoS), lifecycle and component nodes, launch composition, tf2/URDF, ros2_control hardware interfaces, real-time constraints, Nav2, MoveIt 2,…