Skip to content
Skills Library
Science & research · Building & coding

curing-steps

/curing-steps

Configure 4-step curing analysis (vis, rub, glassy, sp) in Abaqus. Invoke when user needs curing step sequence, static step settings, or step-by-step curing process setup.

Licence
MIT
Last repository change
27.10.2026

Assessment and security

100/ 100Class: good
Format25 / 25
Frontmatter with name and description, valid name, description up to 1,024 characters, name matching the folder.
Discoverability25 / 25
Description explains when to use the skill, has a reasonable length and uses third person.
Content35 / 35
At least 150 words and at most 500 lines, headings, step lists, examples or code.
Hygiene15 / 15
No placeholders such as TODO, no Windows paths, with a licence.
Riskno signals detected in the scan
Files in this package
1
Scripts
0
HTML comments
0
URLs in SKILL.md
0
Deprecation

No signals detected. Repository changed on 27.10.2026, without references to retired models or APIs.

Licence

MIT, open: use and modify while retaining author attribution.

What it does and when to use it

Configure 4-step curing analysis (vis, rub, glassy, sp) in Abaqus. Invoke when user needs curing step sequence, static step settings, or step-by-step curing process setup.

Original author description

Configure 4-step curing analysis (vis, rub, glassy, sp) in Abaqus. Invoke when user needs curing step sequence, static step settings, or step-by-step curing process setup.

How it works

  1. Description
  2. Content
Original SKILL.md headings · 85 lines, 323 words
SKILL.md preview
---
name: "curing-steps"
description: "Configure 4-step curing analysis (vis, rub, glassy, sp) in Abaqus. Invoke when user needs curing step sequence, static step settings, or step-by-step curing process setup."
---

# Curing Steps Analysis

## Description

Configure 4-step curing analysis (vis, rub, glassy, sp) in Abaqus. Invoke when user needs curing step sequence, static step settings, or step-by-step curing process setup.

## Content

The composite curing simulation uses 4 steps in sequence, all defined as `*Static` steps with `nlgeom=NO`.

### Step Sequence

#### Step 1: vis (viscous state)
- **Increment control:** 0.1, 1., 1e-05, 0.5
- **Temperature:** 150°C
- **Pressure:** 0.6 MPa
- **Friction:** 0.45
- **Tool BC:** U1=0, U2=0

#### Step 2: rub (rubbery state)
- **Increment control:** 0.1, 1., 1e-05, 0.3
- **Temperature:** 180°C
- **Pressure:** 0.6 MPa
- **Friction:** 0.2 (taumax=0.55)
- **Tool BC:** continues from vis step

#### Step 3: glassy (glassy state)
- **Increment control:** 0.1, 1., 1e-05, 0.5
- **Temperature:** 25°C
- **Pressure:** No pressure
- **Friction:** 0.169
- **Tool BC:** continues from rub step

#### Step 4: sp (springback)
- **Increment control:** 0.1, 1., 1e-05, 0.5
- **Temperature:** 25°C
- **Pressure:** No pressure
- **BC:** Set-2 U1=U2=U3=0
- **Model Change:** removes contact + tool

### Static Step Format

The `*Static` step uses the following format with initial increment, total time, min increment, and max increment:

```
*Static
initial_increment, total_time, min_increment, max_increment
```

Example for vis step:
```
*Static
0.1, 1., 1e-05, 0.5
```

### Output Requests Per Step

Each step includes the following output requests:

```
*Output, field
*Node Output
CF, NT, RF, U
*Element Output, directions=YES
LE, PE, PEEQ, PEMAG, S, SDV, TEMP
*Contact Output
CDISP, CSTRESS
*Output, history, variable=PRESELECT
```

### Restart Configuration

No restart output is written:
```
*Restart, write, frequency=0
```

### Step Transitions

Loads and boundary conditions carry forward from one step to the next unless explicitly replaced with `op=NEW`. This means:
- Tool BCs applied in the vis step remain active through the glassy step
- Pressure applied in vis/rub steps is carried forward unless removed
- To replace all previous loads/BCs, use `op=NEW` on the load or BC keyword

Versions

The database has no other skills named curing-steps.

Database snapshot: 13.11.2026 · package version c29bf39c0b75 (SHA-256 digest of the entire package)

Downloads in the last 30 days: 0 · ranking

Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.

Similar skills

  • 98curing-job
    Submit Abaqus curing simulation jobs with UMAT subroutine via socket bridge. Invoke when user needs to create, submit, or monitor curing simulation jobs.
  • 100curing-temperature
    Define temperature fields for composite curing simulation. Invoke when user needs temperature initialization, temperature changes, or thermal fields for curing steps.

Feedback and reports

Your message goes to Bartosz Sokoliński. An email address is needed only for a reply. See the privacy policy.