Skip to content
Skills Library
Programming · Analysis

codometer-triage

/codometer-triage

Act on a codometer limit breach, a comment budget breach, a stale committed report, or a run that failed outright. Use when a codometer --check exits non-zero, when a size or count limit was breached, when a comment block ran past its word, line, or character budget, when a committed report reads stale against a fresh measurement even though nothing changed, when a limit fails to bind or an input matches no files, or before reaching for a repository's limit value to make a failing check pass.

Repository
codebase ↗
Licence
MIT
Last repository change
26.10.2026

Assessment and security

100/ 100Class: good
Format25 / 25
Frontmatter with name and description, valid name, description up to 1,024 characters, name matching the folder.
Discoverability25 / 25
Description explains when to use the skill, has a reasonable length and uses third person.
Content35 / 35
At least 150 words and at most 500 lines, headings, step lists, examples or code.
Hygiene15 / 15
No placeholders such as TODO, no Windows paths, with a licence.
Riskno signals detected in the scan
Files in this package
1
Scripts
0
HTML comments
0
URLs in SKILL.md
0
Deprecation

No signals detected. Repository changed on 26.10.2026, without references to retired models or APIs.

Licence

MIT, open: use and modify while retaining author attribution.

What it does and when to use it

Act on a codometer limit breach, a comment budget breach, a stale committed report, or a run that failed outright. Use when a codometer --check exits non-zero, when a size or count limit was breached, when a comment block ran past its word, line, or character budget, when a committed report reads stale against a fresh measurement even though nothing changed, when a limit fails to bind or an input matches no files, or before reaching for a repository's limit value to make a failing check pass.

Original author description

Act on a codometer limit breach, a comment budget breach, a stale committed report, or a run that failed outright. Use when a codometer --check exits non-zero, when a size or count limit was breached, when a comment block ran past its word, line, or character budget, when a committed report reads stale against a fresh measurement even though nothing changed, when a limit fails to bind or an input matches no files, or before reaching for a repository's limit value to make a failing check pass.

How it works

  1. A breach
  2. Staleness
  3. A run that failed outright
  4. Before reaching for --output-json/--output-markdown
Original SKILL.md headings · 118 lines, 1,093 words
SKILL.md preview
---
name: codometer-triage
description: Act on a codometer limit breach, a comment budget breach, a stale committed report, or a run that failed outright. Use when a codometer --check exits non-zero, when a size or count limit was breached, when a comment block ran past its word, line, or character budget, when a committed report reads stale against a fresh measurement even though nothing changed, when a limit fails to bind or an input matches no files, or before reaching for a repository's limit value to make a failing check pass.
license: MIT
---

# Acting on a codometer failure

A `--check` run reports three different kinds of finding, and they call for
three different responses. Reading which one occurred, rather than reacting to
"the check failed," is most of this skill.

## A breach

A metric went past a limit declared for it. The report names the metric, the
limit's value, and its severity:

- **`warn`** prints the breach and leaves the exit code alone. Nothing about
  the run fails; it is advance notice that a number is moving in a direction
  worth watching.
- **`fail`** exits `1`, and only when the run asked `--check limits` for a gate
  at all — a `codometer measure --config <path>` measuring the same breach reports nothing
  wrong, because nothing asked it to gate.

**The instinctive fix — raising the limit's `value` — is not an option.** The
limit exists to keep a promise about the codebase's shape; loosening it on the
same change that broke the promise erases the evidence the check existed to
produce, and the next breach starts from a codebase that is already worse.
Reduce what is actually being measured instead:

- A size breach: shrink the input's own output — trim a dependency, split a
  bundle, delete dead code — rather than the number that reports it. The
  `codometer-configure` skill covers declaring an input and pointing it at
  compiled output correctly, which is a common reason a size looks larger than
  the code that produced it: an input measuring more than it should.
- A convention-count breach (too many of something, or too few): the count is
  usually accurate — the fix is in the code the counter is watching, not in
  the counter's `value`.
- A **comment budget** breach is a custom statistic like any other, gated by an
  ordinary `limits[]` entry against its `custom.<label>` metric — but its
  `instances` name a file and a line for each breaching block rather than only
  a total, because the thing measured is one block rather than a
  repository-wide count. Condense that block, or move the detail into
  documentation that has room for it. Check which reader measured it before
  trusting the count — shell, TOML, SQL, and HCL use a line scanner that reads
  a comment marker inside a string literal as a comment, and Python's comments
  go unmeasured entirely when the interpreter cannot be run. The
  `codometer-configure` skill has both caveats in full.
- **A comment budget a language is not covered by is not a breach at all** —
  it is simply not measured. If a repository added a language codometer can
  parse comments in but nobody added a `comment` selector for it, that
  language's blocks run with no budget until one is declared; this is never
  something to diagnose as a false negative in the tool.

If the limit's number was simply wrong for what this metric should hold going
forward — not because of this change, but as a standing decision — that is a
deliberate edit to make and explain on its own, never a side effect of getting
one check to pass.

## Staleness

`--check reports` compares a committed report against a fresh measurement and
fails when they disagree, whether or not any limit is involved. Two causes
produce this, and only one of them is a real regression:

- **The code actually changed** and the committed report was never
  re-measured. Re-run with `--output-json`/`--output-markdown` to refresh it.
- **The runtime changed.** Compressed sizes are Node-version dependent — the
  bundled zlib differs release to release — so a report written on one Node
  version and checked on another reads as stale with zero code changes
  involved. Check on the exact runtime the repository pins for everything
  else before concluding the source moved.

A **breach** and **staleness** are reported as separate findings even when
they come from the same run; do not read one as a symptom of the other.

## A run that failed outright

Distinct from both of the above: the run itself could not finish, collected
into `failures` in the report rather than folded into any metric.

- **A limit bound to nothing.** The metric path names no measurement the run
  actually took — misspelled, or naming an analysis its input never ran, or
  genuinely ambiguous between two inputs. Fix the path in the configuration;
  the `codometer-configure` skill covers how a metric path resolves and why an
  ambiguous one is refused rather than guessed.
- **An input matched no files while carrying a limit.** Declaring a limit
  against an input asserts its files exist, so an empty match means the glob
  stopped matching or the build that should have produced those files never
  ran — check the build step before touching the configuration. An input
  nobody limited that matches nothing is unremarkable and reports no failure.
- **The configuration itself was rejected before anything measured.** A
  missing `format`, two `outputs` entries of the same type, a custom statistic
  naming none of `patterns`/`symbols`/`comment`, or an `outputs` entry
  selecting a `custom` label the top-level `custom` array never declared each
  fail the run at load time with the reason named. A configuration exporting a
  function instead of a plain object is a quieter version of the same problem:
  there is no config-as-function escape hatch any more, so it is not
  recognized and falls back to an empty configuration — which then fails on
  the missing `format` rather than on anything naming the real cause. Fix the
  configuration rather than the command line. A run with no `--config` at
  all is refused before anything is measured: pass `--config <path>` naming
  the configuration file.

Every failure in one run is collected and reported together, so treat a report
naming three as three things to fix, not one flaky run to retry.

## Before reaching for `--output-json`/`--output-markdown`

Remember that the two `--output-*` flags and `--check` are independent, with no
inferred relationship between them — the `codometer-measure` skill has the full
flag table. Combining an `--output-*` flag with `--check reports` is refused
outright: nothing can be stale in a report the same run just wrote, so that
combination is a configuration mistake to fix, not a way to force a report
current.

`--inputs [globs...]` is independent of `--check` too — narrowing a `measure`
run to exactly the given globs does not change whether it gates or writes.
There is no `--directory` on `measure`: a run always measures the process's
own working directory. The `configuration` subcommand is the one place
`-d, --directory` still exists, for listing what a directory's configuration
resolves to rather than for measuring it.

Versions

The database has no other skills named codometer-triage.

Identical content appears in 1 other GitHub folders. We show one copy with the highest score.

Database snapshot: 13.11.2026 · package version 25dd0835de93 (SHA-256 digest of the entire package)

Downloads in the last 30 days: 0 · ranking

Report a problem with this skill: harmful content, incorrect descriptions or an author’s removal request.

Similar skills

  • 95codometer-configure
    Write or edit a codometer.config.ts, declaring inputs, limits, custom convention counters, comment budgets, exclusions, or output destinations. Use when a repository has no codometer configuration yet, when adding a size or count limit, when bounding how long a comment block or…
  • 95codometer-measure
    Run a codometer measurement, decide where its report goes, or read a badge block or JSON report it produced. Use when running codometer or npx @codometer/cli, choosing --output-json/--output-markdown and --check flags, wiring codometer into a CI step, splicing a badge block into…
  • 100bump-size-limit
    Bump size limits in .size-limit.js when the size-limit CI check is failing. Use when the user mentions size limit failures, bundle size checks failing, CI size check errors, or needs to update size-limit thresholds. Also use when the user says "bumpSizeLimit", "fix size limit",…

Feedback and reports

Your message goes to Bartosz Sokoliński. An email address is needed only for a reply. See the privacy policy.